Application of fused deposition modeling technology for fabrication jigs of three-point bending test for dental composite resins
Source abstract
Abstract
This study aimed to clarify the application possibility of the fused deposition modeling (FDM) technology on the fabrication of jigs for a flexural test of dental composite resins (CRs). Three types of jigs were prepared to carry out three-point bending tests; 3D printed jig including support rollers, 3D printed jig with stainless-steel support rollers, and stainless-steel jig and stainless-steel support rollers. An FDM 3D printer with polylactic acid filament was used to produce 3D printed jigs. For evaluation of flexural strength, two types, packable and flowable, of composite resins were selected to prepare specimens. Three-point bending tests were performed using a universal testing machine. Then flexural strength and flexural elastic modulus were calculated. Specimen preparation and three-point bending test were conducted according to the ISO 4049:2019. All experiments were repeated 20 times. Flexural strength and flexural elastic modulus of packable CR were significantly larger than those of flowable. However, there were no significant differences among the jigs in both results. Consequently, FDM technology could be applied to fabricate jigs for the flexural test of CRs, and the mechanical properties could be evaluated as accurately as a stainless-steel jig.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Dental materials and restorations · Anatomy and Medical Technology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing10.1016/j.bushor.2017.05.011 ↗
2. Study of infill print design on production cost-time of 3D printed ABS parts10.1504/IJRAPIDM.2015.074809 ↗
3. Influence of test method on failure stress of brittle dental materials10.1177/00220345900690120201 ↗
4. Color of bulk-fill composite resin restorative materials
5. Survival of direct resin restorations in posterior teeth within a 19-year period (1996-2015): a meta-analysis of prospective studies10.1016/j.dental.2015.05.004 ↗
6. Mechanical properties and filler fraction of dental composites10.1016/0109-5641(89)90128-0 ↗
7. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins10.1111/j.1365-2842.1990.tb01419.x ↗
8. Flexural strength of dental composite restoratives: comparison of biaxial and three-point bending test10.1002/jbm.b.30103 ↗
9. 3D printing in the laboratory: maximize time and funds with customized and open-source labware10.1177/2211068216649578 ↗
10. The effect of preheating of composite resin on its color stability after immersion in tea and coffee solutions: an in-vitro study
11. Materials testing of 3D printed ABS and PLA samples to guide mechanical design
12. Exploration of the customized fixtures for the evaluation of three-point bending strength of dental resin composites
13. A multicenter trial on the long-term performance of direct composite buildups in the anterior dentition - survival and quality outcome
14. A design of experiments approach for the optimisation of energy and waste during the production of parts manufactured by 3D printing10.1016/j.jclepro.2016.07.182 ↗
15. Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties10.1016/j.dental.2017.04.013 ↗
16. International-Organization-for-Standardization, ISO 4049:2019 Dentistry — Polymer-based restorative materials.
17. International-Organization-for-Standardization, ISO 6872:2015 Dentistry — Ceramic materials.
18. International-Organization-for-Standardization, ISO 17296-2:2015 Additive manufacturing — General principles — Part 2: Overview of process categories and feedstock.
19. Effect of test method on flexural strength of recent dental ceramics10.4012/dmj.23.490 ↗
20. Microfracture mechanisms of dental resin composites containing spherically-shaped filler particles10.1177/00220345940730020301 ↗
21. Correlations among bending test methods for dental hard resins10.4012/dmj.2016-304 ↗
22. A randomized controlled 27 years follow up of three resin composites in Class II restorations10.1016/j.jdent.2015.09.003 ↗
23. Accuracy of medical models made by consumer-grade fused deposition modelling printers10.1177/229255031502300201 ↗
24. On the strain rate sensitivity of fused filament fabrication (FFF) processed PLA, ABS, PETG, PA6, and PP thermoplastic polymers10.3390/polym12122924 ↗
25. Accuracy of desktop versus professional 3D printers for maxillofacial model production. A systematic review and meta-analysis10.1016/j.jdent.2021.103741 ↗
26. Characterization of particle emissions from consumer fused deposition modeling 3D printers10.1080/02786826.2017.1342029 ↗