journal article·2022-06Open access

Effects of 3D printed surface topography and normal force on implant expulsion

Amanda Heimbrook, Cambre Kelly, Ken Gall

Abstract

3D printing is a critical method for manufacturing metallic implants as it enables direct fabrication of intricate geometries and porous structures inaccessible to other manufacturing methods. Some common 3D printed porous structures are strut based (e.g. octet truss), triply periodic minimal surfaces (TPMS) (e.g. gyroid) or randomized (e.g. stochastic). When designed to be on the surface of bone interfacing implants, the surface porous region impacts short-term adhesion and friction, ultimately affecting implant stability prior to and during long-term osseointegration. In many orthopedic procedures, expulsion resistance is an essential design requirement, to prevent the risk of the implant migrating from the implantation site. While expulsion tests are universal, they are a poorly understood method to examine the bone-implant interface in determining the performance of an orthopedic implant. In this foundational study, we examine the expulsion behavior of metallic samples in synthetic Sawbone with systematically varied surface topography at increasing applied normal forces. The applied normal force and size of the sample were shown to have the strongest influence on expulsion force followed by surface structure. Compared to a polished sample control, certain 3D printed surface structures are up to 10x more expulsion resistant and should be considered in implants where prevention of implant migration before and during osseointegration is critical. Nonlinear relationships were discovered that reveal "crossover" in expulsion resistance as a function of applied load revealing that the ranking of the relative expulsion resistance of different samples can depend on the normal force selected. This new fundamental understanding has broad implications on both the design and potential standardized regulatory testing of textured orthopedic implants with tailored topologies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Aseptic loosening of total joint replacements: mechanisms underlying osteolysis and potential therapies
2. Current methods of preventing aseptic loosening and improving osseointegration of titanium implants in cementless total hip arthroplasty: a review10.1177/0300060517732697 ↗
3. Is additive manufacturing of patient-specific implant is beneficial for orthopedics10.4103/am.am_20_20 ↗
4. Effect of surface texturing on friction behaviour of 3D printed polylactic acid (PLA)10.1016/j.polymertesting.2020.106434 ↗
5. 3D printing- creating a blueprint for the future of orthopedics: current concept review and the road ahead10.1016/j.jcot.2018.07.007 ↗
6. Nubac disc arthroplasty: preclinical studies and preliminary safety and efficacy evaluations10.1016/S1935-9810(07)70045-2 ↗
7. Architected cellular materials: a review on their mechanical properties towards fatigue-tolerant design and fabrication10.1016/j.mser.2021.100606 ↗
8. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology10.1007/s00402-010-1218-9 ↗
9. Class II special controls guidance document
10. D. Coric and P. V. Mummaneni, "Nucleus replacement technologies: invited submission from the joint section meeting on disorders of the spine and peripheral nerves, March 2007," (in English), J. Neurosurg.: Spine SPI, vol. 8, no. 2, pp. 115-120, 01 Feb. 2008 2008, doi: 10.3171/SPI/2008/8/2/115.10.3171/SPI/2008/8/2/115 ↗
11. 3D printed Ti6Al4V bone scaffolds with different pore structure effects on bone ingrowth10.1186/s13036-021-00255-8 ↗
12. Surface modifications and their effects on titanium dental implants10.1155/2015/791725 ↗
13. Wear and osteolysis in total joint replacements
14. The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting10.1016/j.msec.2019.01.024 ↗
15. Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering10.1016/j.actbio.2019.05.046 ↗
16. Surface treatments of titanium dental implants for rapid osseointegration10.1016/j.dental.2006.06.025 ↗
17. Biology of implant osseointegration
18. Metallurgy principles applied to powder bed fusion 3D printing/additive manufacturing of personalized and optimized metal and alloy biomedical implants: an overview10.1016/j.jmrt.2019.12.015 ↗
19. Three-dimensional printing of metals for biomedical applications
20. Regulating 3D-printed medical products10.1126/scitranslmed.aan6521 ↗
21. Fabrication methods of porous metals for use in orthopaedic applications10.1016/j.biomaterials.2005.12.002 ↗
22. The effects on bone cells of metal ions released from orthopaedic implants. A review
23. Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: an in vivo experiment10.1016/j.msec.2015.10.069 ↗
24. Total disc replacement
25. Chapter 11 - importance of biomaterials in biomedical engineering