Prediction of uniaxial and biaxial flexural strengths of resin-based composites using the Weibull model
Source abstract
Abstract
Objectives The aim of the study was to assess the applicability of the Weibull model for resin-based composites (RBC) to predict the outcome of different flexural tests based on one another, while identifying the minimal sample number for a precise Weibull representation. Methods Four RBCs underwent 3-point, 4-point and biaxial flexural testing (n = 480). Fracture surfaces of all specimens were assessed under optical microscope, while fracture modes of the uniaxial specimens were documented. Representative specimens for each fracture mode were further analyzed under scanning electron microscope. Since fracture predominantly originated from a surface flaw, the effective surface was used in the Weibull model. The analysis was performed on 20, then 30 and finally 40 specimens per group to assess the effect of the specimen size. Further statistical analysis was performed through uni- and multivariate ANOVA, Tukey's post hoc test (α = 0.05), and Pearson's correlation. Results The Weibull model could predict the results of uniaxial tests within the standard deviation, with the correlation between calculated and measured values reaching values of R2 = 0.985 and higher. Predictions for or based on the biaxial tests misestimated the measured values, with a weaker correlation (R2 = 0.875) between measured and calculated flexural strength (FS). The fit of the data to the Weibull distribution improved with rising sample size resulting in better predictions of the FS when n = 40. Significance The applicability of the Weibull model on RBCs allows accurate comparison between bending tests and their FS under consideration of the effective surface.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Dental materials and restorations · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Some approximate treatments of fracture statistics for polyaxial tension10.1007/BF00040871 ↗
2. The ball on three balls test for strength testing of brittle discs: stress distribution in the disc10.1016/S0955-2219(01)00458-7 ↗
3. Reliability analysis of structural ceramics subjected to biaxial flexure10.1111/j.1151-2916.1991.tb06884.x ↗
4. Comparison of three- and four-point flexural strength testing of denture-base polymers10.1016/0109-5641(89)90082-1 ↗
5. Uniaxial/biaxial flexure strengths and elastic properties of resin-composite block materials for CAD/CAM10.1016/j.dental.2018.11.032 ↗
6. Measurement of Poisson's ratio of dental composite restorative materials10.1016/j.biomaterials.2003.09.029 ↗
7. Resin-based composite performance: are there some things we can't predict?10.1016/j.dental.2012.06.013 ↗
8. Biaxial and uniaxial data for statistical comparisons of a ceramic's strength10.1111/j.1151-2916.1979.tb19117.x ↗
9. Harrer · 2007 · 1271
10. ISO 4049 versus NIST 4877: influence of stress configuration on the outcome of a three-point bending test in resin-based dental materials and interrelation between standards10.1016/j.jdent.2021.103682 ↗
11. Microstructural dependence of mechanical properties and their relationship in modern resin-based composite materials10.1016/j.jdent.2021.103829 ↗
12. Academy of Dental Materials guidance-Resin composites: Part I-Mechanical properties10.1016/j.dental.2017.04.013 ↗
13. 2015
14. 2019
15. Effect of test method on flexural strength of recent dental ceramics10.4012/dmj.23.490 ↗
16. Perspectives on strength10.1016/0109-5641(95)80043-3 ↗
17. Flexural fatigue behavior of resin composite dental restoratives10.1016/S0109-5641(02)00088-X ↗
18. The miniaturisation of the 4‐point‐bend test10.1111/j.1460-2695.1997.tb01514.x ↗
19. The reliability in flexural strength testing of a novel dental composite10.1016/S0300-5712(03)00110-6 ↗
20. A critical view on biaxial and short-beam uniaxial flexural strength tests applied to resin composites using Weibull, fractographic and finite element analyses10.1016/j.dental.2009.09.002 ↗
21. Weibull strength scaling for standardized rectangular flexure specimens10.1111/j.1151-2916.2003.tb03329.x ↗
22. Design data for engineering ceramics: a review of the flexure test10.1111/j.1151-2916.1991.tb08259.x ↗
23. Quinn · 2007
24. Material properties and fractography of an indirect dental resin composite10.1016/j.dental.2010.02.008 ↗
25. A practical and systematic review of Weibull statistics for reporting strengths of dental materials10.1016/j.dental.2009.09.006 ↗
26. Flexural strength and Weibull analysis of a microhybrid and a nanofill composite evaluated by 3- and 4-point bending tests10.1016/j.dental.2007.05.013 ↗
27. Statistical failure prediction models for brittle materials10.2514/3.48426 ↗
28. A biaxial‐flexure test for evaluating ceramic strengths10.1111/j.1151-2916.1983.tb09964.x ↗
29. Biaxial flexure tests for ceramics
30. On estimating the Weibull modulus for a brittle material10.1007/BF00561290 ↗
31. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
32. Optimization of sample number for Weibull function of brittle materials strength10.1016/S0272-8842(00)00056-0 ↗