journal article·2026-05Open access

3D-printed CF-PLA bone plates with metamaterial structures: Design, fabrication, and mechanical evaluation

Ani Daniel, Hamed Bakhtiari, Alireza Nouri, Barun K. Das, Muhammad Aamir, Majid Tolouei-Rad

Abstract

This study presents the design, fabrication, and mechanical performance of carbon fiber-reinforced polylactic acid (CF-PLA) bone plates incorporating auxetic and non-auxetic metamaterial architectures. Four lattice-structured bone plates (re-entrant, rotating square, tetrachiral, and hexagonal) were evaluated for their flexural, tensile, and compressive properties. The specimens were fabricated using Fused Deposition Modelling (FDM). The tetrachiral structure demonstrated superior bending capacity, achieving a flexural stress of 17 MPa and a modulus of 1214 MPa. Under both tension and compression, it exhibited the highest strength (24.5 MPa and 40 MPa, respectively) and stiffness (1441 MPa in tension and 2352 MPa in compression), while the rotating square designs offered a favorable balance of flexibility and strength. CF-PLA metamaterial bone plates showed substantially lower stiffness compared to various metallic plates (e.g., Titanium (Ti), steel) indicating their potential to reduce stress shielding and promote bone healing. The auxetic geometries, particularly the tetrachiral and rotating square, exhibited superior tensile and compressive behavior compared to the non-auxetic hexagonal bone plates. The results underscore the potential of 3D-printed CF-PLA metamaterial structures as effective alternatives to metallic bone plates. With further optimization, such designs could enable patient-specific implants with improved biomechanical compatibility and healing outcomes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Bone Tissue Engineering Materials · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (99)

Show source-provided references
1. Analysis and investigation the effect of the printing parameters on the mechanical and physical properties of PLA parts fabricated via FDM printing10.12913/22998624/173562 ↗
2. Effects of part build orientations on fatigue behaviour of FDM-processed PLA material10.1007/s40964-015-0002-3 ↗
3. Mechanical properties of the 2D Re-entrant honeycomb made via direct metal printing
4. Polymer 3D printing review: materials, process, and design strategies for medical applications10.3390/polym13091499 ↗
5. Biomechanical properties of an advanced new carbon/flax/epoxy composite material for bone plate applications10.1016/j.jmbbm.2012.12.013 ↗
6. Fatigue behaviour of load-bearing polymeric bone scaffolds: a review10.1016/j.actbio.2023.09.048 ↗
7. Influence of three-dimensional printing parameters on compressive properties and surface smoothness of polylactic acid specimens10.3390/polym15183827 ↗
8. Effect of 3D printing parameters on the fatigue properties of parts manufactured by fused filament fabrication: a review10.3390/app13020904 ↗
9. Fatigue performance of 3D-Printed poly-lactic-acid bone scaffolds with triply periodic minimal surface and voronoi pore structures10.3390/polym16152145 ↗
10. Impact of 3D printing parameters on static and fatigue properties of polylactic acid (PLA) bone scaffolds10.1016/j.ijfatigue.2024.108420 ↗
11. Impact of biodegradation on the mechanical and fatigue properties of 3D-printed PLA bone scaffolds10.1016/j.jmbbm.2025.107039 ↗
12. Mechanical properties of thermoplastic parts produced by fused deposition modeling:a review10.1108/RPJ-03-2020-0061 ↗
13. Auxetic fixation devices can achieve superior pullout performances compared to standard fixation concepts10.1088/1361-665X/ad442d ↗
14. Varization open-wedge osteotomy of the distal femur: comparison between locking plate and angle blade plate constructs10.1007/s00167-014-2998-1 ↗
15. Effect of FDM infill patterns on mechanical properties10.1016/j.polymertesting.2022.107654 ↗
16. Carbon materials in the treatment of soft and hard tissue injuries
17. A comparative study of the mechanical properties of FDM 3D prints made of PLA and carbon fiber-reinforced PLA for thin-walled applications10.3390/ma14227062 ↗
18. Failure of 3D-printed composite continuous carbon fibre hexagonal frames10.1016/j.compositesb.2024.111307 ↗
19. Unicortical versus bicortical locked plate fixation in midshaft clavicle fractures10.3928/01477447-20150504-59 ↗
20. Design considerations for patient-specific bone fixation plates: a literature review10.1007/s11517-023-02900-4 ↗
21. Biomechanical considerations in the design of patient-specific fixation plates for the distal radius10.1007/s11517-018-1945-6 ↗
22. Compressive and flexural behaviour of engineered cementitious composites based auxetic structures: an experimental and numerical study
23. Carbon fiber reinforced polymers for implantable medical devices10.1016/j.biomaterials.2021.120719 ↗
24. Carbon fiber reinforced polymers for implantable medical devices10.1016/j.biomaterials.2021.120719 ↗
25. The mechanical and morphological properties of bone beneath internal fixation plates of differing rigidity10.1002/jor.1100070203 ↗
26. Metaphyseal fracture healing follows similar biomechanical rules as diaphyseal healing10.1002/jor.21227 ↗
27. Biocompatibility, biodegradation and excretion of polylactic acid (PLA) in medical implants and theranostic systems10.1016/j.cej.2018.01.010 ↗
28. Fatigue properties of 3D-printed polymeric metamaterials: a review10.1016/j.smmf.2025.100076 ↗
29. Dave · 2023
30. Comparative analysis of deformable rotating plate auxetic structures for enhanced crashworthiness
31. Study of auxetic beams under bending: a finite element approach10.1016/j.matpr.2020.10.479 ↗
32. Adaptable metamaterials based on biodegradable composites for bone tissue regeneration10.1134/S2075113321020143 ↗
33. Physical and mechanical properties of PLA, and their functions in widespread applications — a comprehensive review10.1016/j.addr.2016.06.012 ↗
34. Failure analysis and Taguchi design of auxetic recycled rubber structures10.1002/pssb.201384258 ↗
35. Inflammatory tissue response in human soft tissue is caused by a higher particle load near carbon fiber-reinforced PEEK compared to titanium plates10.1016/j.actbio.2024.04.023 ↗
36. A novel chiral three-dimensional material with negative Poisson's ratio and the equivalent elastic parameters10.1016/j.compstruct.2017.05.027 ↗
37. [Limited contact dynamic compression plate (LC-DCP)--biomechanical research as basis to new plate design]
38. Femur auxetic meta-implants with tuned micromotion distribution10.3390/ma14010114 ↗
39. Femur auxetic meta-implants with tuned micromotion distribution10.3390/ma14010114 ↗
40. Performance of a 3D printed cellular structure inspired by bone10.1016/j.tws.2020.106713 ↗
41. Patient-specific plates for distal radius osteotomy: a review of the literature and a parametric plate design concept10.1080/17434440.2025.2519477 ↗
42. A discussion on plating factors that affect stress shielding using finite element analysis10.1299/jbse.5.129 ↗
43. Additively manufactured metallic pentamode meta-materials10.1063/1.4977561 ↗
44. Double-negative mechanical metamaterials displaying simultaneous negative stiffness and negative poisson's ratio properties10.1002/adma.201603959 ↗
45. Advancements and prospects of polymer-based hybrid composites for bone plate applications10.1080/25740881.2023.2274564 ↗
46. Advancements and prospects of polymer-based hybrid composites for bone plate applications10.1080/25740881.2023.2274564 ↗
47. Influence of change in layer thickness on mechanical properties of components 3D printed on Zortrax M 200 FDM printer with Z-ABS filament material & Accucraft i250+ FDM printer with low cost ABS filament material
48. Biomechanical study of the fixation plates for opening wedge high tibial osteotomy10.5792/ksrr.2015.27.3.181 ↗
49. Auxetic mechanical metamaterials10.1039/C6RA27333E ↗
50. Rationally designed meta-implants: a combination of auxetic and conventional meta-biomaterials10.1039/C7MH00699C ↗
51. Strain rate sensitivity of rotating-square auxetic metamaterials10.1016/j.ijimpeng.2024.105128 ↗
52. Experimental investigation and prediction model for mechanical properties of copper-reinforced polylactic acid composites (Cu-PLA) using FDM-based 3D printing technique10.1007/s00170-021-08289-4 ↗
53. Mechanical properties of re-entrant anti-chiral auxetic metamaterial under the in-plane compression10.1016/j.tws.2022.110465 ↗
54. Compressive properties and energy absorption of 4D printed auxetic mechanical metamaterials10.1016/j.compstruct.2024.118135 ↗
55. Inflammation, fracture and bone repair10.1016/j.bone.2016.02.020 ↗
56. Advancements in micromotion-based fixation systems for fracture healing10.1177/10225536251352559 ↗
57. Mechanical property of FDM printed ABS: influence of printing parameters
58. Characterization of carbon fiber reinforced PLA composites manufactured by fused deposition modeling
59. Auxetic polymeric bone plate as internal fixator for long bone fractures: design, fabrication and structural analysis10.3233/THC-151021 ↗
60. Miramini · 2013
61. A comparison between rotating squares and anti-tetrachiral systems: influence of ligaments on the multi-axial mechanical response10.1177/09544062211043145 ↗
62. A review on mechanical metamaterials: exploring negative Poisson's ratio, energy absorption, failure mechanisms, and current research frontiers
63. Investigation on the flexural properties of sandwich beams with auxetic core10.1007/s40430-022-03368-3 ↗
64. The body reaction to carbon fibre particles implanted into the medullary space of rabbits10.1016/0142-9612(81)90049-1 ↗
65. 5 - titanium foam scaffolds for dental applications
66. Biomimetic porous titanium scaffolds for orthopedic and dental applications
67. Finger orthoses for rehabilitation―Part I: biomedical insights and additive manufacturing innovations10.3390/prosthesis7030062 ↗
68. Experimental and computational evaluation of tensile properties of additively manufactured hexa- and tetrachiral auxetic cellular structures
69. Experimental and computational evaluation of tensile properties of additively manufactured hexa- and tetrachiral auxetic cellular structures
70. Structural composite based on 3D printing polylactic acid/carbon fiber laminates (PLA/CFRC) as an alternative material for femoral stem prosthesis10.1016/j.jmbbm.2022.105632 ↗
71. Evolution of the internal fixation of long bone fractures10.1302/0301-620X.84B8.0841093 ↗
72. Carbon fiber biocompatibility for implants10.3390/fib4010001 ↗
73. Investigation of modified auxetic structures from rigid rotating squares10.3390/ma15082848 ↗
74. Philosophy of selecting ASTM standards for mechanical characterization of polymers and polymer composites10.37358/MP.21.3.5523 ↗
75. A review on the effect of biomechanical aspects and the type of stability fixation on the bone fracture healing process
76. The impact of early axial interfragmentary motion on the fracture healing environment: a scoping review10.1016/j.injury.2024.111917 ↗
77. Mechanical and geometric performance of PLA-based polymer composites processed by the fused filament fabrication additive manufacturing technique10.3390/ma13081924 ↗
78. Radiolucent carbon fiber-reinforced pedicle screws for treatment of spinal tumors: advantages for radiation planning and Follow-Up imaging10.1016/j.wneu.2017.04.091 ↗
79. Study of novel 3D-Printed auxetic metamaterial structures under compressive loading: design, simulation, and experiment10.1038/s41598-025-21857-y ↗
80. Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials10.1016/j.ijfatigue.2020.106007 ↗
81. Auxetic biomedical metamaterials for orthopedic surgery applications: a comprehensive review10.1111/os.14142 ↗
82. Nanocellulose/PEGDA aerogels with tunable poisson's ratio fabricated by stereolithography for mouse bone marrow mesenchymal stem cell culture10.3390/nano11030603 ↗
83. Carbon fibre reinforced PEEK versus traditional metallic implants for orthopaedic trauma surgery: a systematic review
84. Different storage times and their effect on the bending load to failure testing of murine bone tissue
85. Mechanical properties of raw filaments and printed specimens: effects of fiber reinforcements and process parameters10.3390/polym16111576 ↗
86. A new design of 3D-printed orthopedic bone plates with auxetic structures to mitigate stress shielding and improve intra-operative bending10.1007/s42242-020-00066-8 ↗
87. Lightweight mechanical metamaterials with tunable negative thermal expansion10.1103/PhysRevLett.117.175901 ↗
88. Arthrodesis of the equine proximal interphalangeal joint: a biomechanical comparison of two 7-hole 3.5-mm broad and two 5-hole 4.5-mm narrow dynamic compression plates10.1053/jvet.2002.29457 ↗
89. D. Wolter, "Biocompatibility of Carbon Fibre and Carbon Fibre Microparticles," (in eng), no. 0378-8504 (Print).
90. The effect of micromovement on callus formation10.1007/s007760100014 ↗
91. Nanofiber‐coated CF/PEEK composite: boosting osteogenesis for enhanced bone grafting10.1002/mame.202400286 ↗
92. Carbon fiber implants in orthopaedic oncology10.3390/jcm11174959 ↗
93. Carbon fiber implants in orthopaedic oncology10.3390/jcm11174959 ↗
94. Evaluation of the effect of bone plate modulus on the early bone healing of fractured tibia10.1016/j.compositesb.2022.109668 ↗
95. 3D printed hierarchical re-entrant honeycombs: enhanced mechanical properties and the underlying deformation mechanisms10.1016/j.compstruct.2022.115550 ↗
96. Experimental testing of fracture fixation plates: a review10.1177/09544119221108540 ↗
97. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗
98. Additively manufactured multi-functional metamaterials: low coefficient of thermal expansion and programmable Poisson's ratio10.1080/17452759.2024.2303714 ↗
99. Reinforcing mechanism of lattice-reinforced cementitious composites: insight into flexural performance and material interactions10.1016/j.matdes.2025.114332 ↗