journal article·2023-06Open access

Mechanical characterization of a novel biomimetic artificial disc for the cervical spine

Celien A.M. Jacobs, S. Amir Kamali, Abdelrahman M. Abdelgawad, Björn P. Meij, Samaneh Ghazanfari, Marianna A. Tryfonidou, Stefan Jockenhoevel, Keita Ito

Abstract

A novel biomimetic artificial intervertebral disc (bioAID) replacement implant has been developed containing a swelling hydrogel representing the nucleus pulposus, a tensile strong fiber jacket as annulus fibrosus and titanium endplates with pins to primarily secure the device between the vertebral bodies. In this study, the design safety of this novel implant was evaluated based on several biomechanical parameters, namely compressive strength, shear-compressive strength, risk of subsidence and device expulsion as well as identifying the diurnal creep-recovery characteristics of the device. The bioAID remained intact up to 1 kN under static axial compression and only 0.4 mm of translation was observed under a compressive shear load of 20 N. No subsidence was observed after 0.5 million cycles of sinusoidal compressive loading between 50 and 225 N. After applying 400 N in antero-posterior direction under 100 N axial compressive preload, approximately 2 mm displacement was found, being within the range of displacements reported for other commercially available cervical disc replacement devices. The diurnal creep recovery behavior of the bioAID closely resembled what has been reported for natural intervertebral discs in literature. Overall, these results indicate that the current design can withstand (shear-compression loads and is able to remain fixed in a mechanical design resembling the vertebral bodies. Moreover, it is one of the first implants that can closely mimic the poroelastic and viscoelastic behavior of natural disc under a diurnal loading pattern.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Spine and Intervertebral Disc Pathology · Cervical and Thoracic Myelopathy · Spinal Fractures and Fixation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Sensitivity of the cervical disc loads, translations, intradiscal pressure, and muscle activity due to segmental mass, disc stiffness, and muscle strength in an upright neutral posture
2. Standard test method for measuring load induced subsidence of intervertebral body fusion device under static axial compression 1,” no
3. 2016 · vol. 15 · 6
4. ASTM F2346-05 · 2012
5. A new bone surrogate model for testing interbody device subsidence10.1097/BRS.0b013e31820bffe9 ↗
6. Cervical spine joint loading with neck flexion10.1080/00140139.2019.1677944 ↗
7. Mechanical characterization of a viscoelastic disc for lumbar total disc replacement
8. Structure-function relationships at the human spinal disc-vertebra interface10.1002/jor.23627 ↗
9. Biomechanics of the cervical spine. I : normal kinematics10.1016/S0268-0033(00)00034-6 ↗
10. Biomechanical behavior of a biomimetic artificial intervertebral disc10.1097/BRS.0b013e3182326305 ↗
11. Design of next generation total disk replacements10.1016/j.jbiomech.2011.09.017 ↗
12. Subsidence after anterior lumbar interbody fusion using paired stand-alone rectangular cages10.1007/s00586-004-0817-y ↗
13. Biomechanical contributions of spinal structures with different degrees of disc degeneration10.1097/BRS.0000000000003883 ↗
14. Elastic, permeability and swelling properties of human intervertebral disc tissues: a benchmark for tissue engineering10.1016/j.jbiomech.2013.12.021 ↗
15. Van Den Broek · 2012
16. Cervical disc arthroplasty: rationale and history10.14444/7086 ↗
17. Long-term culture of bovine nucleus pulposus explants in a native environment10.1016/j.spinee.2012.12.006 ↗
18. Dowling-Medley · 2019 · 234 · 141
19. Requirements for an artificial intervertebral disc10.1177/039139880102400510 ↗
20. Summary of safety and effectiveness data - SECURE C
21. Total disc replacement versus anterior cervical discectomy and fusion10.1302/0301-620X.100B8.BJJ-2018-0120.R1 ↗
22. Head and Neck loading in everyday and vigorous activities10.1007/s10439-010-0183-3 ↗
23. Galbusera · 2018
24. Globus Medical · 2012 · 1
25. Radiculopathy and myelopathy at segments adjacent to the site of a previous anterior cervical arthrodesis10.2106/00004623-199904000-00009 ↗
26. Viscoelastic cervical total disc replacement devices: design concepts10.1016/j.spinee.2020.08.007 ↗
27. Jacobs · 2022
28. Surface modifications to promote the osteoconductivity of ultra-high-molecular-weight-polyethylene fabrics for a novel biomimetic artificial disc prosthesis: an in vitro study
29. Spinal facet joint biomechanics and mechanotransduction in normal, injury and degenerative conditions10.1115/1.4004493 ↗
30. Discrepancy between cervical disc prostheses and anatomical cervical dimensions10.1016/j.aott.2016.03.003 ↗
31. Primary spinal segment stability with a stand-alone cage: in vitro evaluation of a successful goat model10.1080/17453670610046398 ↗
32. Contribution of disc degeneration to osteophyte formation in the cervical spine: a biomechanical investigation10.1016/S0736-0266(01)00010-9 ↗
33. I. LDR Spine USA, “Summary of Safety and Effectiveness Data Mobi-C,” 20013.
34. Osteopenia and total disc prosthesis subsidence: inclusion/exclusion criteria for total disc replacement10.1016/S1935-9810(07)70051-8 ↗
35. Comparison of cervical spine biomechanics after fixed- and mobile-core artificial sisc replacement: a finite element analysis10.1097/BRS.0b013e3181f5cb87 ↗
36. Geometry of inferior endplates of the cervical spine10.1016/j.clineuro.2016.01.027 ↗
37. Does location of rotation center in artificial disc affect cervical biomechanics?10.1097/BRS.0000000000000818 ↗
38. Analysis and measurement of neck loads10.1002/jor.1100060514 ↗
39. Load-displacement properties of lower cervical spine motion segments10.1016/0021-9290(88)90285-0 ↗
40. Biomaterials in orthopaedics10.1098/rsif.2008.0151 ↗
41. Material properties of bovine intervertebral discs across strain rates10.1016/j.jmbbm.2016.10.012 ↗
42. Material properties of human lumbar intervertebral discs across strain rates10.1016/j.spinee.2019.07.012 ↗
43. NuVasive · 2012
44. Axial creep loading and unloaded recovery of the human intervertebral disc and the effect of degeneration10.1016/j.jmbbm.2011.02.002 ↗
45. Prosthesis design influences segmental contribution to total cervical motion after cervical disc arthroplasty10.1007/s00586-019-06064-4 ↗
46. Simulated-physiological loading conditions preserve biological and mechanical properties of caprine lumbar intervertebral discs in EX vivo culture10.1371/journal.pone.0033147 ↗
47. Material science in cervical total disc replacement
48. Kinematic analysis of the cervical spine following implantation of an artificial cervical disc10.1097/01.brs.0000176320.82079.ce ↗
49. Disc arthroplasty design influences intervertebral kinematics and facet forces10.1016/j.spinee.2005.07.004 ↗
50. A bovine nucleus pulposus explant culture model10.1002/jor.25226 ↗
51. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
52. CHARITI versus ProDisc: a comparative study of a minimum 3-year follow-up10.1097/01.brs.0000260795.57798.a0 ↗
53. Injectable hydrogels with high fixed charge density and swelling pressure for nucleus pulposus repair: biomimetic glycosaminoglycan analogues10.1016/j.actbio.2013.11.010 ↗
54. I. Spinal Kinetics, “Summary of Safety and Effectiveness Data M6-C.”.
55. Does design matter? Cervical disc replacements under review10.1007/s10143-016-0765-0 ↗
56. Footprint mismatch in total cervical disc arthroplasty10.1007/s00586-012-2594-3 ↗
57. Flow-related mechanics of the intervertebral disc: the validity of an in vitro model10.1097/01.brs.0000179306.40309.3a ↗
58. Modelling creep behaviour of the human intervertebral disc10.1016/j.jbiomech.2013.05.026 ↗
59. The poro-elastic behaviour of the intervertebral disc: a new perspective on diurnal fluid flow10.1016/j.jbiomech.2015.11.041 ↗
60. Are axial intervertebral disc biomechanics determined by osmosis?10.1016/j.jbiomech.2017.04.027 ↗
61. Comparison of upper neck loading in young adult and elderly volunteers during low speed frontal impacts10.3389/fbioe.2021.682974 ↗
62. Wade · 2018
63. Long-term results comparing cervical disc arthroplasty to anterior cervical discectomy and fusion: a systematic review and meta-analysis of randomized controlled trials10.1111/os.12585 ↗
64. White · 1990
65. Adjacent segment degeneration or disease after cervical total disc replacement: a meta-analysis of randomized controlled trials10.1186/s13018-018-0940-9 ↗
66. In vitro studies for investigating creep of intervertebral discs under axial compression: a review of testing environment and results10.3390/ma15072500 ↗
67. Biomechanics of the cervical spine Part 2. Cervical spine soft tissue responses and biomechanical modeling10.1016/S0268-0033(00)00074-7 ↗
68. Physical properties of the human head: mass, center of gravity and moment of inertia10.1016/j.jbiomech.2009.03.029 ↗
69. Motion preservation surgery of the spine: advanced techniques and controversies10.3174/ajnr.A1707 ↗
70. Donnan contribution and specific ion effects in swelling of cationic hydrogels are additive: combined high-resolution experiments and finite element modeling10.3390/gels6030031 ↗