journal article·2026-01Open access

Accuracy of cross-sectional area determining methods for tensile testing of iliotibial band

Michael Werner, Welf-Guntram Drossel, Sabine Löffler, Niels Hammer

Abstract

Determining accurate values on specimen cross-sectional areas is crucial when conducting biomechanical experiments in an effort to derive meaningful properties such as ultimate tensile strength and elastic modulus. Several studies have investigated various methods for cross-section measurements using various soft tissues and applications. Comparison between methods is missing to date especially for (human) biological soft tissues. This given study determined the cross-sectional areas of ten synthetic polyamide 12 and twenty-nine human iliotibial band specimens. It used the following four commonly deployed methods: caliper gauge (CG), molding compound (MC), X-ray micro computed tomography (μCT) and digital image correlation (DIC). The repeatability coefficient was calculated for the four methods and the agreement between the four methods were compared using Bland-Altman plots. All methods but CG offer consistent and reliable measurements of iliotibial band cross section determination, with no difference in their performance levels. In the polyamide specimens, cross-section determination using μCT appeared to provide the best repeatability coefficient RC (0.09 mm2 and 0.18 mm2 with reduced voxel resolution). It shows also for iliotibial band specimens the best agreements especially when compared to MC with a bias less than 1 % and limits of agreements lower ±25 %. The given data suggest that any of the given methods, μCT, MC or DIC can be used effectively for CSA measurements of soft tissues. Minor methodological discrepancies were observed exclusively in specimens with highly uniform geometries. The principal limiting factor appears to be inherent tissue-specific variability rather than the measurement precision of the applied systems. In contrast, due to systematic bias and poor concordance with all other methods investigated, CG cannot be recommended for accurate CSA determination of soft tissue specimens.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Optical measurement and interference techniques · Lower Extremity Biomechanics and Pathologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Statistical methods for assessing agreement between two methods of clinical measurement10.1016/S0140-6736(86)90837-8 ↗
2. Applying the right statistics: analyses of measurement studies10.1002/uog.122 ↗
3. A novel alginate localization molding technique for cross-sectional area measurement of human tendon to access biomechanical properties10.1007/s10561-020-09858-9 ↗
4. Cross-sectional area measurement techniques of soft tissue: a literature review10.1111/os.12757 ↗
5. Cross sectional area measurement of tendon and ligament in vitro: a simple, rapid, non-destructive technique10.1016/j.jbiomech.2004.05.003 ↗
6. 3D printed clamps for in vitro tensile tests of human gracilis and the superficial third of quadriceps tendons10.3390/app11062563 ↗
7. Do cells contribute to tendon and ligament biomechanics?10.1371/journal.pone.0105037 ↗
8. Ethanol-glycerin fixation with thymol conservation: a potential alternative to formaldehyde and phenol embalming10.1002/ase.1270 ↗
9. Sample size considerations in soft tissue biomechanics10.1016/j.actbio.2023.07.036 ↗
10. A review of methods to measure tendon dimensions10.1186/s13018-018-1056-y ↗
11. Advanced 3D-Printed capstan clamping system for accurate uniaxial tensile testing of biological soft tissues10.3390/app142411537 ↗
12. Clamping soft biologic tissues for uniaxial tensile testing: a brief survey of current methods and development of a novel clamping mechanism10.1016/j.jmbbm.2019.103503 ↗
13. Material properties of human patellar-ligament grafts from the elderly population10.1016/j.jmbbm.2020.103994 ↗
14. Comparison of ultrasound-derived muscle thickness with computed tomography muscle cross-sectional area on admission to the intensive care unit: a pilot cross-sectional study10.1002/jpen.1822 ↗
15. Integrative measurement method for tensile test based on DIC using modified second-order shape function10.1016/j.measurement.2023.114098 ↗
16. Shape or size matters? Towards standard reporting of tensile testing parameters for human soft tissues: systematic review and finite element analysis10.3389/fbioe.2024.1368383 ↗
17. The tendon unit: biochemical, biomechanical, hormonal influences10.1186/s13018-023-03796-4 ↗
18. Print-A-Punch: a 3D printed device to cut dumbbell-shaped specimens from soft tissue for tensile testing10.1016/j.jbiomech.2020.110011 ↗
19. Mechanical properties of dilated human ascending aorta10.1114/1.1484220 ↗
20. Comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress10.1016/j.jbiomech.2013.05.003 ↗
21. The use of digital image correlation in the biomechanical area: a review10.1080/23335432.2015.1117395 ↗
22. A full-field 3D digital image correlation and modelling technique to characterise anterior cruciate ligament mechanics ex vivo10.1016/j.actbio.2020.07.003 ↗
23. Intra and inter-rater reliability between ultrasound imaging and caliper measures to determine spring ligament dimensions in cadavers10.1038/s41598-019-51384-6 ↗
24. Standardized tensile testing of soft tissue using a 3D printed clamping system
25. Standardized tensile testing of soft tissue using a 3D printed clamping system10.1016/j.ohx.2020.e00159 ↗
26. Utilization of 3D printing technology to facilitate and standardize soft tissue testing10.1038/s41598-018-29583-4 ↗
27. The tensile behaviors of the iliotibial band - a cadaveric investigation10.26603/ijspt20200451 ↗
28. MultiDIC: an open-source toolbox for multi-view 3D digital image correlation10.1109/ACCESS.2018.2843725 ↗
29. Biomechanical comparison of thiel embalmed and fresh frozen nerve tissue10.1007/s12565-020-00535-1 ↗
30. Applying ASTM standards to tensile tests of musculoskeletal soft tissue: methods to reduce grip failures and promote reproducibility10.1115/1.4048646 ↗
31. Quantitative computed tomography measurement of cross-sectional area of small pulmonary vessels in asthmatic patients10.1097/CM9.0000000000000367 ↗
32. Time-dependent effects of ethanol-glycerin embalming on iliotibial band biomechanics10.1016/j.jmbbm.2025.106887 ↗
33. Tensile properties of the human iliotibial tract depend on height and weight10.1016/j.medengphy.2019.05.001 ↗
34. Surface coating and speckling of the human iliotibial tract does not affect its load-deformation properties10.1038/s41598-020-77299-1 ↗
35. What is considered a variation of biomechanical parameters in tensile tests of collagen-rich human soft tissues? - critical considerations using the human cranial dura mater as a representative morpho-mechanic model