Calibration of Drucker–Prager plasticity in prosthetic materials: From experimental characterization to reverse-engineering finite element analysis
Source abstract
Abstract
OBJECTIVE: Accurate simulation of prosthetic materials requires constitutive models that capture pressure sensitivity and tension-compression asymmetry beyond linear elasticity. METHODS: This study presents a reverse-engineering workflow to calibrate a Drucker-Prager based constitutive model in LS-DYNA using the semi-analytical model for polymers MAT 187L SAMP Light for a resin composite (Brilliant Crios) and a polymer-infiltrated ceramic network (Vita Enamic). Unconfined uniaxial compression, three-point bending, and Brazilian disc tests provide elastic constants and strength measures that serve as inputs and calibration targets. An analytical initialization maps experimentally determined yield stresses to the linear Drucker-Prager yield surface, supplying reliable starting parameters for finite element reverse-engineering optimization. RESULTS: The calibrated model captures the material response in the calibration tests (three-point bending and Brazilian disc) within the pre-peak regime, and an out-of-sample punch-through test confirms the transferability of the parameters without additional tuning. Compared to von Mises characterization approaches, the pressure-dependent characterization was achieved with only one additional test configuration, shifting effort from experiments to numerical computation optimization. SIGNIFICANCE: Within these limits, the results support pressure-dependent, asymmetric plasticity as a practical basis for predictive finite element analysis of dental restoratives, while highlighting that explicit damage and strain-rate effects should be incorporated in future work to model softening and failure consistently.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Automotive and Human Injury Biomechanics · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effect of the composition of CAD/CAM Composite Blocks on mechanical properties10.1155/2018/4893143 ↗
2. Three-dimensional finite element analysis of different connector designs for all-ceramic implant-supported fixed dental prostheses10.3390/ceramics5010004 ↗
3. Drucker–prager criterion10.1007/s00603-012-0278-2 ↗
4. ASTM · 2017
5. Chairside CAD/CAM materials. part 1: Measurement of elastic constants and microstructural characterization10.1016/j.dental.2016.10.009 ↗
6. Using occlusal wear information and finite element analysis to investigate stress distributions in human molars10.1111/j.1469-7580.2011.01396.x ↗
7. Dental resin composites: A review on materials to product realizations10.1016/j.compositesb.2021.109495 ↗
8. Measurement of Poisson’s ratio of dental composite restorative materials10.1016/j.biomaterials.2003.09.029 ↗
9. De Souza Neto · 2008
10. Soil mechanics and plastic analysis or limit design10.1090/qam/48291 ↗
11. Aging behavior of high-translucent CAD/CAM resin-based composite blocks10.1016/j.jmbbm.2020.104269 ↗
12. Resin composite—state of the art10.1016/j.dental.2010.10.020 ↗
13. A historical perspective on dental composite restorative materials10.3390/jfb15070173 ↗
14. Failure behavior of an epoxy matrix under different kinds of static loading10.1016/S0266-3538(01)00057-4 ↗
15. Mechanical properties and internal fit of 4 CAD-CAM block materials10.1016/j.prosdent.2017.03.001 ↗
16. Resin composite materials for chairside CAD/CAM Restorations: A Comparison of selected mechanical properties10.1155/2021/8828954 ↗
17. Retracted: digital dentistry: past, present, and future
18. A modified Drucker–Prager Cap model for die compaction simulation of pharmaceutical powders10.1016/j.ijsolstr.2008.01.024 ↗
19. The evaluation of Poisson’s ratio and the modulus of materials of a low tensile resistance by the Brazilian (indirect tensile) test with particular reference to concrete
20. Shade, aging and spatial-dependent variation of elastoplastic and viscoelastic characteristics in a dental, submicron hybrid CAD/CAM Composite10.3390/ma16165654 ↗
21. ISO · 2020
22. Suggested methods for determining tensile strength of rock materials10.1016/0148-9062(78)90003-7 ↗
23. Mechanical performance of implant-supported posterior crowns10.1016/j.prosdent.2014.10.015 ↗
24. SAMP-1: a semi-analytical model for the simulation of polymers
25. The strength of the Brazilian fracture test10.1016/j.jmps.2023.105473 ↗
26. Wear, strength, modulus and hardness of CAD/CAM restorative materials10.1016/j.dental.2016.08.222 ↗
27. The Brazilian disc test for rock mechanics applications: review and new insights10.1007/s00603-012-0257-7 ↗
28. Livermore Software Technology · 2020
29. Energy dissipation capacities of CAD-CAM restorative materials: A comparative evaluation of resilience and toughness10.1016/j.prosdent.2018.05.003 ↗
30. Influence of accelerated ageing on the physical properties of CAD/CAM restorative materials10.1007/s00784-019-03101-w ↗
31. In vitro evaluation of CAD/CAM composite materials10.1016/j.jdent.2023.104623 ↗
32. Microstructural residual stress in particle-filled dental composite10.1080/10255842.2013.781158 ↗
33. Determining the Drucker–Prager Cap model constants using experimental, numerical and optimization for compacted Mg powders at different strain rates10.1088/1402-4896/ad482f ↗
34. Microstructure characterization and SCG of newly engineered dental ceramics10.1016/j.dental.2016.03.018 ↗
35. Thirteen ways to look at the correlation coefficient10.2307/2685263 ↗
36. Is the assumption of linear elasticity within prosthodontics valid for polymers? —An exemplary study of possible problems10.4012/dmj.2019-373 ↗
37. Finite element simulation of fixed dental prostheses made from PMMA —part II: material modeling and nonlinear finite element analysis10.4012/dmj.2020-231 ↗
38. Monolithic crowns fracture analysis: The effect of material properties, cusp angle and crown thickness10.1016/j.dental.2020.04.022 ↗
39. Constitutive model calibration for powder compaction using instrumented die testing10.1007/s11340-011-9542-8 ↗
40. Mechanical properties, wear resistance, and reliability of two CAD-CAM resin matrix ceramics
41. Load-bearing capacity under fatigue and FEA analysis of simplified ceramic restorations supported by peek or zirconia polycrystals as foundation substrate for implant purposes10.1016/j.jmbbm.2021.104760 ↗
42. Endocrown restorations: influence of dental remnant and restorative material on stress distribution10.1016/j.dental.2018.06.012 ↗
43. Scipy 1.0: Fundamental algorithms for scientific computing in Python10.1038/s41592-019-0686-2 ↗
44. Chairside CAD/CAM materials. part 2: flexural strength testing10.1016/j.dental.2016.10.008 ↗
45. A 3D-FEA study on the impact of different preparation forms and materials on posterior occlusal veneers10.1016/j.jmbbm.2024.106462 ↗
46. Modeling the powder compaction process by an integrated simulation and inverse optimization method