journal article·2026-09

A geometry-driven optimization framework for tuning cyclic stiffness and dissipative response in additively manufactured implant-like lattices

Ibrahim T. Teke, Ahmet H. Ertas

Publisher page

Abstract

This study presents a geometry-driven optimization framework for additively manufactured implant-like lattice architectures, focusing on the control of architecture-dependent cyclic mechanical response. The proposed Manufacturability-Aware Surrogate-Assisted Topology Optimization framework integrates a genetic algorithm, a Gaussian-process surrogate model, and gradient-based refinement within a unified pipeline that enforces additive manufacturing constraints. The framework uses a deformation-derived mechanical response proxy to guide the ranking of manufacturable lattice architectures according to their expected stiffness-related and dissipation-related behavior. Optimized M-88 and M-2525 architectures were fabricated from PLA and evaluated under quasi-static and cyclic compression. The finer M-2525 architecture exhibited higher quasi-static stiffness and a more storage-dominated cyclic response, whereas the coarser M-88 architecture showed a stronger loss-modulus contribution and more dissipative cyclic behavior. These cyclic trends were consistent with the quasi-static compression results, indicating that geometry-driven design can shift the response of lattice architectures between stiff elastic behavior and more viscous or dissipative behavior. Overall, the proposed framework provides a computational-experimental route for tuning geometry-dependent cyclic response in manufacturable additively manufactured lattices.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Topology Optimization in Engineering · Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Fatigue characteristics and numerical modeling socket for patient with above knee prosthesis10.4028/www.scientific.net/DDF.398.76 ↗
2. Fatigue characteristics and numerical modelling prosthetic for chopart amputation
3. Study and analysis of Ti13Nb13Zr implants in the above knee osseointegration prosthesis
4. On the fatigue life of dental implants: Numerical and experimental investigation on configuration effect10.1016/j.medengphy.2023.104078 ↗
5. A finite element study of fatigue load effects on total hip joint prosthesis10.1080/10255842.2021.1900133 ↗
6. Agostinho Hernandez, B., Paterno, A., Capello Sousa, E.A., de Oliveira Freitas, J.P., Foschini, C.R., Fatigue analysis of dental prostheses by finite element method (FEM). In: ASME IMECE 2015, Volume 3: Biomedical and Biotechnology Engineering. http://dx.doi.org/10.1115/IMECE2015-51911, V003T03A081.10.1115/IMECE2015-51911 ↗
7. Topology optimization and fatigue analysis of temporomandibular joint prosthesis10.4236/wjm.2017.712025 ↗
8. Is fatigue mechanism implicated in intraoral fracture of narrow dental implants? A thorough retrieval analysis of two failed implant fixtures retrieved from a single patient10.1016/j.sdentj.2024.02.006 ↗
9. Fatigue characterization for composite materials used in artificial socket prostheses with the adding of nanoparticles10.1088/1757-899X/928/2/022107 ↗
10. Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials10.1016/j.jmbbm.2014.12.015 ↗
11. Fatigue behavior of porous biomaterials manufactured using selective laser melting10.1016/j.msec.2013.08.006 ↗
12. Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem10.1016/j.jmbbm.2013.03.002 ↗
13. Fatigue design of dental implant assemblies: A nominal stress approach10.3390/met10060744 ↗
14. Multiaxial fatigue life assessment of dental implants10.1016/j.heliyon.2024.e36777 ↗
15. Finite element modelling and fatigue life assessment of a cemented total hip prosthesis based on 3D scanning10.1016/j.engfailanal.2020.104536 ↗
16. Investigation the mechanical properties of a novel multicomponent scaffold coated with a new bio-nanocomposite for bone tissue engineering: Fabrication, simulation and characterization10.1016/j.jmrt.2021.10.107 ↗
17. The mechanical behaviors of various dental implant materials under fatigue10.1155/2018/5047319 ↗
18. In-vitro fatigue and fracture performance of three different ferrulized implant connections used in fixed prosthesis10.1016/j.jds.2020.08.002 ↗
19. An in vitro evaluation of the fatigue behavior of resin composite materials as part of a translational research cycle10.1016/j.dental.2024.06.010 ↗
20. Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting10.1016/j.jmbbm.2017.11.044 ↗
21. The use of simulation in analysis of femoral prostheses fatigue
22. Creep simulation and comparison of micro-CT-based FE model of porcine and human cancellous bone10.1080/10255842.2013.815977 ↗
23. Creep simulation of a micro-CT based finite element model of porcine cancellous bone
24. Simulation of creep in non-homogenous samples of human cortical bone10.1080/10255842.2011.575069 ↗
25. Fatigue properties of ufg ti grade 2 dental implant vs. conventionally tested smooth specimens10.1016/j.jmbbm.2021.104715 ↗
26. The effect of implantoplasty on the fatigue behavior and corrosion resistance in titanium dental implants10.3390/ma17122944 ↗
27. Optimized planning and evaluation of dental implant fatigue testing: A specific software application10.3390/biology9110372 ↗
28. Determining the fatigue life of dental implants10.1115/1.2889058 ↗
29. Influence of loading frequency on implant failure under cyclic fatigue conditions10.1016/j.dental.2009.06.015 ↗
30. Fatigue behavior of as-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering10.1016/j.actbio.2019.05.046 ↗
31. Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics10.1016/j.jmbbm.2018.08.008 ↗
32. Fatigue of mineralized tissues: Cortical bone and dentin10.1016/j.jmbbm.2007.04.002 ↗
33. A selective strategy for determining suitable structure and fatigue behavior study of minimal surface scaffolds fabricated by EBM10.1016/j.ijfatigue.2022.107380 ↗
34. Enhancement in the fatigue resistances of triply periodic surfaces-based scaffolds10.1016/j.ijmecsci.2023.108119 ↗
35. Pseudo fatigue test of passive energy-returning prosthetic foot
36. Fatigue life prediction of pedicle screw for spinal surgery10.3221/IGF-ESIS.35.43 ↗
37. Design and analysis of polycentric prosthetic knee with enhanced kinematics and stability10.1007/s13246-022-01211-6 ↗
38. Design of new generation femoral prostheses using functionally graded materials: A finite element analysis10.1177/0954411912459421 ↗
39. Effect of geometrical parameters on the performance of longitudinal functionally graded femoral prostheses10.1111/aor.12315 ↗
40. Long-term fatigue and its probability of failure applied to dental implants10.1155/2016/8927156 ↗
41. Biodegradation-affected fatigue behavior of extrusion-based additively manufactured porous iron–manganese scaffolds10.1016/j.actbio.2024.02.024 ↗
42. Static and fatigue loading of veneered implant-supported fixed dental prostheses10.1111/jopr.13173 ↗
43. Fracture and fatigue behaviour of implants made of Ti alloys10.1016/j.prostr.2020.01.061 ↗
44. Mechanical deviation in 3D-printed PLA bone scaffolds during biodegradation10.1016/j.compbiomed.2024.109227 ↗
45. Silva · 2023
46. Fatigue behaviour of NiTi shape memory alloy scaffolds produced by SLM, a unit cell design comparison10.1016/j.jmbbm.2017.01.016 ↗
47. Implant-abutment interface design affects fatigue and fracture strength of implants10.1111/j.1600-0501.2008.01581.x ↗
48. Effect of loading angles and implant lengths on the static and fatigue fractures of dental implants10.3390/ma14195542 ↗
49. Effect of grid size on fatigue life calculations of a dental implant
50. Mechanical behavior control in cranial implant cells via structural optimization: a path to sensitivity management
51. Approach to the fatigue and cellular behavior of superficially modified porous titanium dental implants10.3390/ma15113903 ↗
52. Fracture and fatigue of titanium narrow dental implants: new trends in order to improve the mechanical response10.3390/ma12223728 ↗
53. An experimental fatigue study of a porous scaffold for the regeneration of articular cartilage10.1016/j.jbiomech.2015.02.013 ↗
54. On interaction between fatigue of reconstruction plate and time-dependent bone remodeling10.1016/j.jmbbm.2022.105483 ↗
55. Mechanical in vitro fatigue testing of implant materials and components using advanced characterization techniques10.1002/jbm.b.34970 ↗
56. In situ microradioscopy and microtomography of fatigue-loaded dental two-piece implants10.1107/S1600577515015763 ↗
57. Fatigue behavior and osseointegration of porous Ti-6Al-4V scaffolds with dense core for dental application10.1016/j.matdes.2020.108994 ↗
58. Corrosion fatigue behavior and anti-fatigue mechanisms of an additively manufactured biodegradable zinc-magnesium gyroid scaffold10.1016/j.actbio.2022.09.047 ↗