Durability and offloading performance of 3D-printed multilayer lattice for accommodative insoles
Source abstract
Abstract
Custom accommodative insoles fabricated from multilayer foams are the standard of care (SoC) for offloading elevated plantar pressures in individuals with diabetes at risk of foot ulceration. While SoC insoles have demonstrated short-term effectiveness, they are prone to permanent material deformation over time, reducing their offloading efficacy. Recent work has shown that 3D-printed multilayer lattice structures using elastomeric polyurethane (EPU) can match the mechanical properties of SoC foams and is effective in reducing plantar pressures. However, their long-term pressure offloading performance and durability have not been investigated. In this pilot study, 3D-printed EPU multilayer lattice pucks and SoC multilayer foam pucks, with and without designed offloading regions, underwent one million cycles of sinusoidal compressive loading under both uniform and uneven loading conditions. Peak pressure (PP), pressure time integral (PTI), residual thickness, and elastic modulus were assessed at multiple timepoints throughout testing. Under uniform loading, both materials maintained stable PPs below the 200 kPa clinical threshold across one million cycles. Under uneven loading, SoC pucks exhibited progressive pressure increases and residual thickness reductions of up to 36%, while 3D-printed pucks maintained structural integrity with thickness reductions of 3% or less and demonstrated reduced PP over time. Both materials with designed offloading regions effectively maintained PPs below 150 kPa throughout testing. These results from bench testing are promising and show the potential for 3D-printed multilayer lattice materials as a durable and effective long-term strategy for pressure reduction.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Additive Manufacturing and 3D Printing Technologies · Interconnection Networks and Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Management of diabetic foot ulcers
2. Armstrong
3. Diabetic foot ulcers: a review
4. Offloading effect of therapeutic footwear in patients with diabetic neuropathy at high risk for plantar foot ulceration10.1111/j.1464-5491.2012.03770.x ↗
5. Physical properties, durability, and energy-dissipation function of dual-density orthotic materials used in insoles for diabetic patients10.3113/FAI.2007.0880 ↗
6. Brodsky · 1988
7. Evaluation and optimization of therapeutic footwear for neuropathic diabetic foot patients using in-shoe plantar pressure analysis10.2337/dc10-2206 ↗
8. Plantar pressure relief in the diabetic foot using forefoot offloading shoes10.1016/j.gaitpost.2009.01.003 ↗
9. Compression testing of foamed plastics and rubbers for use as orthotic shoe insoles
10. In-shoe plantar pressure measurement technologies for the diabetic foot: a systematic review10.1016/j.heliyon.2024.e29672 ↗
11. A method for subject-specific modelling and optimisation of the cushioning properties of insole materials used in diabetic footwear10.1016/j.medengphy.2015.03.009 ↗
12. Subject specific optimisation of the stiffness of footwear material for maximum plantar pressure reduction10.1007/s10439-017-1826-4 ↗
13. Footwear and insole design features for offloading the diabetic at risk foot—A systematic review and meta-analyses
14. De Pasquale · 2022
15. Foto · 1998
16. Pathways of load transfer in custom accommodative insoles for people with diabetes10.1016/j.clinbiomech.2025.106645 ↗
17. 3D printed elastomeric polyurethane: viscoelastic experimental characterizations and constitutive modelling with nonlinear viscosity functions10.1016/j.ijnonlinmec.2020.103546 ↗
18. A novel workflow to a fabricate patient-specific 3D printed accommodative foot orthosis with personalized latticed metamaterial10.1016/j.medengphy.2022.103802 ↗
19. In-shoe plantar pressure depends on walking speed and type of weight-bearing activity in people with diabetes at high risk of foot ulceration10.1016/j.clinbiomech.2023.105980 ↗
20. Highly-stretchable 3D-architected mechanical metamaterials
21. 3D printed lattice microstructures to mimic soft biological materials10.1088/1748-3190/aae10a ↗
22. A comparison of shoe insole materials in plantar pressure relief10.3109/03093648609164517 ↗
23. Design and 3D printing of adjustable modulus porous structures for customized diabetic foot insoles
24. Etiology, epidemiology, and disparities in the burden of diabetic foot ulcers
25. Mechanical properties and reliability of parametrically designed architected materials using urethane elastomers10.3390/polym13050842 ↗
26. Evaluation of novel plantar pressure-based 3-dimensional printed accommodative insoles - a feasibility study10.1016/j.clinbiomech.2022.105739 ↗
27. Muir · 2025
28. Exploring the mechanical properties of 3D-printed multilayer lattice structures for use in accommodative insoles10.1016/j.jmbbm.2023.106309 ↗
29. Nilsen · 2022
30. Custom therapeutic insoles based on both foot shape and plantar pressure measurement provide enhanced pressure relief10.2337/dc07-2288 ↗
31. Additive manufacturing and biomechanical validation of a patient-specific diabetic insole10.1002/pat.4832 ↗
32. Diabetic foot ulcer: a comprehensive review of pathophysiology and management modalities10.12998/wjcc.v11.i8.1684 ↗
33. Improving sustainability of footwear production through 3D printing of shoes
34. 2026
35. The risk of foot ulceration in diabetic patients with high foot pressure: a prospective study