The nanogranular nature of C–S–H
Source abstract
Abstract
Abstract Despite its ubiquitous presence as binding phase in all cementitious materials, the mechanical behavior of calcium–silicate–hydrates (C–S–H) is still an enigma that has deceived many decoding attempts from experimental and theoretical sides. In this paper, we propose and validate a new technique and experimental protocol to rationally assess the nanomechanical behavior of C–S–H based on a statistical analysis of hundreds of nanoindentation tests. By means of this grid indentation technique we identify in situ two structurally distinct but compositionally similar C–S–H phases heretofore hypothesized to exist as low density (LD) C–S–H and high density (HD) C–S–H, or outer and inner products. The main finding of this paper is that both phases exhibit a unique nanogranular behavior which is driven by particle-to-particle contact forces rather than by mineral properties. We argue that this nanomechanical blueprint of material invariant behavior of C–S–H is a consequence of the hydration reactions during which precipitating C–S–H nanoparticles percolate generating contact surfaces. As hydration proceeds, these nanoparticles pack closer to center on-average around two characteristic limit packing densities, the random packing limit ( η = 64 % ) and the ordered face-centered cubic (fcc) or hexagonal close-packed (hcp) packing limit ( η = 74 % ), forming a characteristic LD C–S–H and HD C–S–H phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Micromechanical analysis of creep and shrinkage mechanisms
2. Buckle, H., 1973. In: J.W. Westbrook, H. Conrad (Eds.), The Science of Hardness Testing and its Applications. American Society for Metals, Metal Park, OH, pp. 453–491.
3. Scaling, dimensional analysis and indentation measurements10.1016/j.mser.2004.05.001 ↗
4. The effect of two types of C–S–H on the elasticity of cement-based materials: results from nanoindentation and micromechanical modeling10.1016/S0008-8846(03)00230-8 ↗
5. Constantinides, G., Ulm, F.-J., van Vliet, K.J., 2003. On the use of nanoindentation for cementitious materials. Mater. Struct. RILEM (205) 191–196 (Special issue of Concrete Science and Engineering).10.1007/BF02479557 ↗
6. Improving the density of jammed disordered packings using ellipsoids10.1126/science.1093010 ↗
7. Dormieux, L., Ulm, F.-J. (Eds.), 2005. Applied micromechanics of porous materials. CISM Courses and Lectures, vol. 480. Springer, Wiely, New York.10.1007/3-211-38046-9 ↗
8. Micromechanical approach to the behaviour of poroelastic materials10.1016/S0022-5096(02)00008-X ↗
9. Finite element study for nanoindentation measurements on two-phase materials10.1557/jmr.2004.19.1.85 ↗
10. Galin, L.A., 1961. In: I.N. Sneddon (Ed.), Contact Problems in Theory of Elasticity (H. Moss, Trans.). North Carolina State College.
11. Dual-indentation technique for the assessment of strength properties of cohesive-frictional material10.1016/j.ijsolstr.2005.03.035 ↗
12. Hershey, A., 1954. The elasticity of an isotropic aggregate of anisotropic cubic crystals. J. Appl. Mech. (ASME) 21, 236–240.10.1115/1.4010899 ↗
13. Physics of granular state10.1126/science.255.5051.1523 ↗
14. A model for the microstructure of calcium silicate hydrate in cement paste10.1016/S0008-8846(99)00209-4 ↗
15. Colloid model of C–S–H and implications to the problem of creep and shrinkage10.1617/14137 ↗
16. Jennings, H.M., Thomas, J.J., Gevrenov J.S., Constantinides G., Ulm, F.-J., 2006. A multi-technique investigation of the nanoporosity of cement paste. Cement Concrete Research, in Press. Online version available May 11, 2006.
17. Kröner, E., 1958. Computation of the elastic constants of a polycrystal from the constants of the monocrystal. Z. Phys. 151, 504–518, (in German).
18. Kröner, E., 1971. Statistical continuum mechanics. CISM Courses and Lectures, vol. 92. Udine, Italy.10.1007/978-3-7091-2862-6 ↗
19. The structure and stoichiometry of C–S–H10.1016/j.cemconres.2004.04.035 ↗
20. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
21. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
22. Why does concrete set? The nature of cohesion forces in hardened cement-based materials10.1557/mrs2004.97 ↗
23. Studies of the physical properties of hardened portlandite cement paste
24. Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of C–S–H: applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, portland cement, and blends of portland cement with blast-furnace slag metakaolin or silica fume10.1016/j.cemconres.2004.05.034 ↗
25. Kepler's conjecture confirmed10.1038/26609 ↗
26. The relation between load and penetration in the axi-symmetric Boussinesq problem for a punch of arbitrary profile10.1016/0020-7225(65)90019-4 ↗
27. Stutzman, Paul, E., Clifton, J.R., 1999. Specimen preparation for scanning electron microscopy. In: Jany, L., Nisperos, A. (Eds.), Proceedings of the 21st International Conference on Cement Microscopy, Las Vegas, Nevada, pp. 10–22.
28. Suquet, P. (Ed.), 1997. Continuum micromechanics. CISM Courses and Lectures, vol. 377. Springer, Wien, New York.10.1007/978-3-7091-2662-2 ↗
29. A model for two types of calcium silicate hydrate in the microstructure of portland cement pastes10.1016/S0008-8846(00)00257-X ↗
30. Effect of heat treatment on the pore structure and drying shrinkage behavior of hydrated cement paste10.1111/j.1151-2916.2002.tb00450.x ↗
31. Is concrete a poromechanics material?—A multiscale investigation of poroelastic properties’10.1617/14100 ↗
32. Experimental is microporomechanics
33. Determination by nanoindentation of elastic modulus and hardness of pure constituents of portland cement clinker10.1016/S0008-8846(00)00505-6 ↗
34. Continuum micromechanics: survey10.1061/(ASCE)0733-9399(2002)128:8(808) ↗