The dependence of the Taylor–Quinney coefficient on the dynamic loading mode
Source abstract
Abstract
Abstract The efficiency of the thermomechanical conversion, expressed as the Taylor–Quinney coefficient (TQC) is seldom reported in the literature and generally assumed to be equal to 0.9. Moreover, an eventual dependence of this coefficient on the dynamic loading mode has not been investigated so far. This work presents a systematic characterization of the TQC for seven different metals and alloys loaded in dynamic tension, compression and dominant shear. The results show that the TQC varies greatly with the investigated material, instead of its assumed constant value of 0.9. Likewise, until final collapse of the specimen, the overall temperature rise remains quite modest. Moreover, we clearly observe that for commercially pure Titanium, which exhibits an asymmetric mechanical response in tension and compression, the measured TQC values are mode dependent too. Microstructural characterization reveals profuse twinning in compression and shear, as opposed to tension. Twinning is related to heat generation in accord with previous studies. In addition to reporting a wide database of TQC values, this study reveals a new correlation between the thermomechanical characteristics of a material and its deformation micromechanisms, that should find its way into constitutive models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-pressure geophysics and materials · High-Velocity Impact and Material Behavior · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The stored energy of cold work10.1016/0079-6425(73)90001-7 ↗
2. Boley · 1960
3. Coupled thermoplasticity10.1016/0022-5096(63)90004-8 ↗
4. Dodd · 2012
5. Numerical validation of the shear compression specimen. Part 1: quasi-static large strain testing10.1007/BF02428190 ↗
6. Numerical validation of the shear compression specimen. Part II: dynamic large strain testing10.1007/BF02428191 ↗
7. Modification of the shear-compression specimen for large strain testing10.1007/s11340-015-0057-6 ↗
8. On the measurement of local strain and temperature during the formation of adiabatic shear bands10.1016/0921-5093(92)90026-W ↗
9. The heat developed during plastic extension of metals10.1098/rspa.1925.0034 ↗
10. Plastic work to heat conversion during high-strain rate deformation of Mg and Mg alloy10.1007/s11661-016-3825-8 ↗
11. Measurement of the temperature profile during shear band formation in steels deforming at high strain rates10.1016/0022-5096(87)90009-3 ↗
12. Partition of plastic work into heat and stored energy in metals10.1007/BF02325036 ↗
13. Determination of temperature rise during high strain rate deformation10.1016/S0167-6636(97)00036-7 ↗
14. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
15. The measurement of specimen surface temperature in high-speed tension and torsion tests10.1016/S0734-743X(98)00007-4 ↗
16. An experimental study of the formation process of adiabatic shear bands in a structural steel10.1016/0022-5096(88)90012-9 ↗
17. On the strain and strain rate dependence of the fraction of plastic work converted into heat: an experimental study using high speed infrared detectors and the Kolsky bar10.1016/0167-6636(94)90054-X ↗
18. Analytical characterization of the shear localization in thermoviscoplastic materials10.1115/1.3173121 ↗
19. The respective influence of microstructural and thermal softening on adiabatic shear localization10.1016/j.mechmat.2012.09.008 ↗
20. Effects of deformation twinning on energy dissipation in high rate deformed zirconium10.1007/s11661-007-9365-5 ↗
21. Simultaneous transient temperature sensing of impacted polymers using infrared detectors and thermocouples10.1007/s11340-007-9096-y ↗
22. Plastic deformation of high-purity α-titanium: model development and validation using the Taylor cylinder impact test10.1016/j.mechmat.2014.03.010 ↗
23. On the conversion of plastic work to heat during high strain rate deformation of glassy polymers10.1016/S0167-6636(98)00063-5 ↗
24. Thermomechanical characterization of pure polycrystalline tantalum10.1016/j.msea.2006.10.064 ↗
25. The mechanical response of pure iron at high strain rates under dominant shear10.1016/j.msea.2006.05.154 ↗
26. Thermo-mechanical aspects of adiabatic shear failure of AM50 and Ti6Al4V alloys10.1016/j.mechmat.2008.03.002 ↗
27. Adiabatic shear failure and dynamic stored energy of cold work10.1103/PhysRevLett.96.075502 ↗
28. The latent energy remaining in a metal after cold working10.1098/rspa.1934.0004 ↗
29. Tresca · 1879 · 4
30. Thermomechanical properties of polymers at high rates of strain
31. An infrared transient temperature measuring apparatus and its application to the tensile impact testing
32. On the Taylor–Quinney coefficient in dynamically phase transforming materials. Application to 304 stainless steel10.1016/j.ijplas.2012.08.003 ↗
33. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗