journal article·2014-12

Dynamic stress–strain states for metal foams using a 3D cellular model

Zhijun Zheng, Changfeng Wang, Jilin Yu, Stephen R. Reid, John J. Harrigan

Publisher page

Abstract

Abstract Dynamic uniaxial impact behaviour of metal foams using a 3D cell-based finite element model is examined. At sufficiently high loading rates, these materials respond by forming ‘shock or consolidation waves’ ( Tan et al., 2005a , Tan et al., 2005b ). However, the existing dynamic experimental methods have limitations in fully informing this behaviour, particularly for solving boundary/initial value problems. Recently, the problem of the shock-like response of an open-cell foam has been examined by Barnes et al. (2014) using the Hugoniot-curve representations. The present study is somewhat complementary to that approach and additionally aims to provide insight into the ‘rate sensitivity’ mechanism applicable to cellular materials. To assist our understanding of the ‘loading rate sensitivity’ behaviour of cellular materials, a virtual ‘test’ method based on the direct impact technique is explored. Following a continuum representation of the response, the strain field calculation method is employed to determine the local strains ahead of and behind the resulting ‘shock front’. The dynamic stress–strain states in the densification stage are found to be different from the quasi-static ones. It is evident that the constitutive behaviour of the cellular material is deformation-mode dependent. The nature of the ‘rate sensitivity’ revealed for cellular materials in this paper is different from the strain-rate sensitivity of dense metals. It is shown that the dynamic stress–strain states behind a shock front of the cellular material lie on a unique curve and each point on the curve corresponds to a particular ‘impact velocity’, referred as the velocity upstream of the shock in this study. The dynamic stress–strain curve is related to a layer-wise collapse mode, whilst the equivalent quasi-static curve is related to a random shear band collapse mode. The findings herein are aimed at improving the experimental test techniques used to characterise the rate-sensitivity behaviour of real cellular materials and providing data appropriate to solving dynamic loading problems in which cellular metals are utilised.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. ABAQUS · 2010
2. Dynamic crushing of aluminum foams: Part I – Experiments10.1016/j.ijsolstr.2013.11.019 ↗
3. High strain rate compression of closed-cell aluminium foams10.1016/S0921-5093(00)01219-3 ↗
4. High strain rate compressive behaviour of aluminium alloy foams10.1016/S0734-743X(99)00153-0 ↗
5. Shock enhancement of cellular structures under impact loading: Part I experiments10.1016/j.jmps.2007.04.005 ↗
6. Dynamic crushing of aluminum foams: Part II – Analysis10.1016/j.ijsolstr.2013.11.020 ↗
7. Gibson · 1988
8. High rate crushing of wood along the grain10.1016/j.ijmecsci.2004.12.013 ↗
9. The correct analysis of shocks in a cellular material10.1016/j.ijimpeng.2009.03.011 ↗
10. An investigation of the mechanical properties of materials at very high rates of loading10.1088/0370-1301/62/11/302 ↗
11. Li, J., Shimizu, F., 2005. Least-square atomic strain. Report, 〈http://mt.seas.upenn.edu/Archive/Graphics/A/annotate_atomic_strain/Doc/main.pdf〉.
12. Dynamic crushing of 2D cellular structures: local strain field and shock wave velocity10.1016/j.ijimpeng.2013.01.008 ↗
13. On the local nature of the strain field calculation method for measuring heterogeneous deformation of cellular materials10.1016/j.ijsolstr.2013.10.019 ↗
14. A numerical study on the rate sensitivity of cellular metals10.1016/j.ijsolstr.2009.07.024 ↗
15. Dynamics of metal foam deformation during Taylor cylinder-Hopkinson bar impact experiment10.1016/S0263-8223(03)00039-4 ↗
16. High-velocity plate impact of metal foams10.1016/S0734-743X(03)00066-6 ↗
17. Modeling the progressive collapse behavior of metal foams10.1016/j.ijimpeng.2005.12.004 ↗
18. Modeling loading rate effect on crushing stress of metallic cellular materials10.1016/j.ijimpeng.2008.11.013 ↗
19. Meyers · 1994
20. Okabe · 1992
21. Shock enhancement of cellular structures under impact loading: part II analysis10.1016/j.jmps.2007.04.004 ↗
22. The use of metal foam projectiles to simulate shock loading on a structure10.1016/j.ijimpeng.2004.07.012 ↗
23. Dynamic uniaxial crushing of wood10.1016/S0734-743X(97)00016-X ↗
24. Dynamic compressive strength properties of aluminium foams. Part I – experimental data and observations10.1016/j.jmps.2005.05.007 ↗
25. Dynamic compressive strength properties of aluminium foams. Part II – ‘shock’ theory and comparison with experimental data and numerical models10.1016/j.jmps.2005.05.003 ↗
26. On the dynamic mechanical properties of open-cell metal foams – A re-assessment of the ‘simple-shock theory’10.1016/j.ijsolstr.2012.03.026 ↗
27. Sphericity and roundness of rock particles10.1086/624040 ↗
28. Wang · 2007
29. Experimental investigation on dynamic constitutive behavior of aluminum foams by new inverse methods from wave propagation measurements10.1016/j.ijimpeng.2013.06.002 ↗
30. Woven glass/epoxy laminates subject to projectile impact10.1016/0734-743X(95)00001-Q ↗
31. Impact response of high density flexible polyurethane foam10.1016/j.ijimpeng.2011.09.004 ↗
32. Dynamic compression properties of porous aluminum10.1016/S0167-577X(02)00603-1 ↗
33. Dynamic crushing of 2D cellular structures: a finite element study10.1016/j.ijimpeng.2005.05.007 ↗
34. Dynamic crushing of cellular materials: continuum-based wave models for the transitional and shock modes10.1016/j.ijimpeng.2011.09.009 ↗
35. Dynamic crushing of cellular materials: a unified framework of shock models10.1016/j.ijimpeng.2012.06.012 ↗
36. Effects of cell irregularity on the high strain compression of open-cell foams10.1016/S1359-6454(01)00402-5 ↗
37. Dynamic crushing of honeycombs and features of shock fronts10.1016/j.ijimpeng.2007.11.008 ↗