Tension, compression, and bending of superelastic shape memory alloy tubes
Source abstract
Abstract
Abstract While many uniaxial tension experiments of shape memory alloys (SMAs) have been published in the literature, relatively few experimental studies address their behavior in compression or bending, despite the prevalence of this latter deformation mode in applications. In this study, superelastic NiTi tubes from a single lot of material were characterized in tension, compression, and pure bending, which allowed us to make direct comparisons between the deformation modes for the first time. Custom built fixtures were used to overcome some long-standing experimental difficulties with performing well-controlled loading and accurate measurements during uniaxial compression (avoiding buckling) and large-rotation bending. In all experiments, the isothermal, global, mechanical responses were measured, and stereo digital image correlation (DIC) was used to measure the evolution of the strain fields on the tube's outer surface. As is characteristic of textured NiTi, our tubes exhibited significant tension–compression asymmetry in their uniaxial responses. Stress-induced transformations in tension exhibited flat force plateaus accompanied by strain localization and propagation. No such localization, however, was observed in compression, and the stress “plateaus” during compression always maintained a positive tangent modulus. While our uniaxial results are similar to the observations of previous researchers, the DIC strain measurements provided details of localized strain behavior with more clarity and allowed more quantitative measurements to be made. Consistent with the tension–compression asymmetry, our bending experiments showed a significant shift of the neutral axis towards the compression side. Furthermore, the tube exhibited strain localization on the tension side, but no localization on the compression side during bending. This is a new observation that has not been explored before. Detailed analysis of the strain distribution across the tube diameter revealed that the traditional assumption of elementary beam theory, that plane sections remain plane, does not hold. Yet when the strain was averaged over a few diameters of axial length, the tensile and compressive responses input into elementary beam theory predicted the global bending response with reasonable accuracy. While it is encouraging that a simple model could predict the moment–curvature response, we recommend that beam theory be used with caution. The averaged strain field can under/over predict local strains by as much as two-fold due to the localized deformation morphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Adler, P.H., Allen, J., J., L., Francis, R., 2007. Martensite transformations and fatigue behavior of Nitinol. J. ASTM Int. 4(7).10.1520/JAI100645 ↗
2. Moment–curvature relations for a pseudoelastic beam10.1007/BF01125887 ↗
3. A superelastic shape-memory-alloy beam model10.1177/1045389X9700800602 ↗
4. Bending of superelastic wires, Part I10.1115/1.2895952 ↗
5. Bending of superelastic wires, Part II10.1115/1.2895953 ↗
6. Brazier, L., 1927. On the flexure of thin cylindrical shells and other “thin” sections. Proc. R. Soc. London Ser. A 116 (773), 104.10.1098/rspa.1927.0125 ↗
7. Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy10.1016/j.jmps.2004.01.001 ↗
8. Superelastic tension and bending characteristics of shape memory alloys10.1007/BF03028074 ↗
9. Stresses and deflections in a pseudo-elastic beam under cyclic loads10.1007/s00161-004-0193-1 ↗
10. Thermodynamics of shape memory alloy wire10.1007/s00161-006-0022-9 ↗
11. Shape memory alloy bending bars as seismic restrainers for bridges in seismic areas10.1007/BF03249500 ↗
12. Churchill, C.B., 2010. Experimental Techniques for Characterizing the Thermo-electro-mechanical Shakedown Response of SMA Wires and Tubes. Ph.D. Dissertation. The University of Michigan, Department of Aerospace Engineering, December.
13. Correlated Solutions, 2010a. Vic-3D Manual. Correlated Solutions, Inc., Columbia, SC.
14. Correlated Solutions, 2010b. Vic-3D Testing Guide. Correlated Solutions, Inc., Columbia, SC.
15. Asymmetrical bending model for NiTi shape memory wires
16. Fatigue resistance of SMA-martensite bars subjected to flexural bending10.1016/j.ijmecsci.2005.05.007 ↗
17. An overview of Nitinol Medical applications10.1016/S0921-5093(99)00294-4 ↗
18. Homogeneous and heterogeneous deformation mechanisms in an austenitic polycrystalline Ti-5.08at% Ni thin tube under tension. Investigation via temperature and strain fields measurements10.1016/j.actamat.2007.05.027 ↗
19. Experimental investigation on macroscopic domain formation and evolution in polycrystalline NiTi microtubing under mechanical force10.1016/j.jmps.2006.02.005 ↗
20. Tension–compression asymmetry of the stress–strain response in aged single crystal and polycrystalline NiTi10.1016/S1359-6454(98)00432-7 ↗
21. A multivariant micromechanical model for SMAs. Part 1. Crystallographic issues for single crystal model10.1016/S0749-6419(00)00013-9 ↗
22. Hard X-ray studies of stress-induced phase transformations of superelastic NiTi shape memory alloys under uniaxial load10.1016/j.msea.2007.02.156 ↗
23. Macroscopic equilibrium domain structure and geometric compatibility in elastic phase transition of thin plates10.1016/j.ijmecsci.2009.09.008 ↗
24. Non-medical applications of shape memory alloys10.1016/S0921-5093(99)00293-2 ↗
25. The effect of uniaxial cyclic deformation on the evolution of phase transformation fronts in pseudoelastic NiTi wire10.1177/104538902761402549 ↗
26. An experimental setup for measuring unstable thermo-mechanical behavior of shape memory alloy wire10.1177/104538902761402558 ↗
27. A continuum mechanics based derivation of Reissner's large-displacement finite-strain beam theory10.1007/s00707-008-0085-8 ↗
28. Constitutive modelling and numerical simulation of multivariant phase transformation in superelastic shape-memory alloys10.1002/nme.940 ↗
29. Kocks · 1995
30. Localization and propagation of curvature under pure bending in steel tubes with Lud¨ers bands10.1016/j.ijsolstr.2008.01.013 ↗
31. The initiation and growth of macroscopic martensite band in nano-grained NiTi microtube under tension10.1016/S0749-6419(02)00026-8 ↗
32. Analysis of the pseudoelastic behavior of a SMA beam by the element-free Galerkin method10.1016/S0955-7997(03)00103-6 ↗
33. EBSD studies of the stress-induced B2–B19'martensitic transformation in NiTi tubes under uniaxial tension and compression10.1016/j.actamat.2010.02.009 ↗
34. Matlab R2010b, 2010. Matlab Documentation. MathWorks, Natick, MA.
35. Crystallography of martensitic transformation in Ti–Ni single crystals10.1016/0001-6160(87)90042-3 ↗
36. Understanding the deformation and fracture of Nitinol endovascular stents using in situ synchrotron X-Ray microdiffraction10.1002/adma.200601916 ↗
37. Deformation and transition behavior associated with the R-phase in Ti–Ni alloys10.1007/BF02644442 ↗
38. Medical shape memory alloy applications—the market and its products10.1016/j.msea.2003.10.326 ↗
39. Stress-induced phase transformation and detwinning in NiTi polycrystalline shape memory alloy tubes10.1016/j.mechmat.2005.05.008 ↗
40. Micromechanical modelling of superelasticity in shape memory alloys
41. Pelton, A., Rebelo, N., Duerig, T., Wick, A., 1994. Experimental and FEM analysis of the bending behavior of superelastic tubing. In: Pelton, A.R., Hodgson, D., Duerig, T.W. (Eds.), SMST-94: Proceedings of the First International Conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA. p. 353.
42. Measurement of deformation and strain in Nitinol10.1007/s11340-006-9014-8 ↗
43. Analytical description of the bending behaviour of NiTi shape-memory alloys10.1007/BF00366873 ↗
44. On beams made of a phase-transforming material10.1016/S0020-7683(02)00187-7 ↗
45. On the bending of shape memory wires10.1080/15376490590953581 ↗
46. Anatomization of hysteresis loops in pure bending of ideal pseudoelastic SMA beams10.1016/S0020-7403(00)00033-3 ↗
47. Reedlunn, B., Daly, S., Hector, L.G.J., Zavattieri, P., Shaw, J.A., 2013. Tips and tricks for characterizing shape memory alloy wire: Part 5—full-field strain measurement by digital image correlation. Exp. Techn., 37 (3), 62–78.10.1111/j.1747-1567.2011.00717.x ↗
48. Pseudoelastic behaviour of shape memory alloy beams under pure bending10.1016/S0020-7403(02)00011-5 ↗
49. Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (5.07at%) Ni under extensional load with synchrotron radiation10.1016/j.msea.2003.11.081 ↗
50. Shaw, J.A., 1997. Material Instabilities in a Nickel–Titanium Shape Memory Alloy. Ph.D. Dissertation. The University of Texas at Austin, Department of Aerospace Engineering, January.
51. Thermomechanical aspects of NiTi10.1016/0022-5096(95)00024-D ↗
52. On the nucleation and propagation of phase transformation fronts in a NiTi alloy10.1016/S1359-6454(96)00189-9 ↗
53. Initiation and propagation of localized deformation in elasto-plastic strips under uniaxial tension10.1016/S0749-6419(97)00062-4 ↗
54. Sutton, M.A., Orteu, J.J., Schreier, H.W., 2009. Image Correlation for Shape, Motion, and Deformation Measurements: Basic Concepts, Theory, and Applications. Springer, New York.
55. Deformation behaviour of NiTi shape memory alloys in bending10.1007/BF02387832 ↗
56. Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading10.1016/j.actamat.2009.12.021 ↗