A microstructure-sensitive driving force for crack growth
Source abstract
Abstract
A stored energy based methodology for calculating the driving force for crack growth is introduced which can capture the highly local microstructural sensitivity. This has been implemented in the context of crystal plasticity finite element simulations with explicit representation of the crack with the eXtended Finite Element Method (XFEM), with non-local approaches for both stored energy and J-integral calculation. The model is shown to have good agreement with discrete dislocation plasticity (DDP) models in terms of the crack-tip dislocation configurational energy, and with experimental observations of long and very short (microstructurally-sensitive) cracks for both fracture toughness and crack growth rate data. The method is shown to capture the microstructural sensitivity, in contrast with the widely used J-Integral method. By modelling different crack lengths, the diminution of the microstructural sensitivity with increasing crack length is quantified and a critical length defined above which the microstructural sensitivity is insignificant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Microstructure and mechanical properties · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Application of the cyclic to fatigue crack propagation of Al 2024-T35110.1016/0013-7944(91)90270-B ↗
2. Elastic crack growth in finite elements10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S ↗
3. Arbitrary discontinuities in finite elements10.1002/1097-0207(20010210)50:4<993::AID-NME164>3.0.CO;2-M ↗
4. The stored energy of cold work: predictions from discrete dislocation plasticity10.1016/j.actamat.2005.07.011 ↗
5. Cracks and extrusions caused by persistent slip bands10.1080/14786435.2013.798048 ↗
6. Assessment of small fatigue crack growth driving forces in single crystals with and without slip bands10.1007/s10704-012-9726-y ↗
7. Microstructurally-sensitive fatigue crack nucleation in Ni-based single and oligo crystals10.1016/j.jmps.2017.05.012 ↗
8. Cyclic J-integral in relation to fatigue crack initiation and propagation10.1016/0013-7944(91)90018-V ↗
9. A discrete dislocation analysis of mode I crack growth10.1016/S0022-5096(99)00076-9 ↗
10. In situ studies and modeling the fracture of Zircaloy-410.1016/j.jnucmat.2009.06.033 ↗
11. In situ studies and modeling of the deformation and fracture mechanism for wrought Zircaloy-4 and Zircaloy-2 as a function of stress-state10.1016/j.jnucmat.2012.11.005 ↗
12. Discrete dislocation modeling of fatigue crack propagation10.1016/S1359-6454(01)00377-9 ↗
13. Crystal plasticity analysis of micro-deformation, lattice rotation and geometrically necessary dislocation density
14. Atomistic mechanisms of fatigue in nanocrystalline metals10.1103/PhysRevLett.94.165502 ↗
15. Fatigue crack growth in a nickel-based superalloy at elevated temperature - experimental studies, viscoplasticity modelling and XFEM predictions10.1186/s40759-015-0003-4 ↗
16. Realistic microstructure-based modelling of cyclic deformation and crack growth using crystal plasticity10.1016/j.commatsci.2015.09.054 ↗
17. Multiaxial fatigue life predictions under the influence of mean-stresses10.1115/1.3226066 ↗
18. Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method10.1016/j.actamat.2005.10.053 ↗
19. High-cycle fatigue of nickel-base superalloy René 104 (ME3): interaction of microstructurally small cracks with grain boundaries of known character10.1016/j.actamat.2007.01.033 ↗
20. Discrete dislocation plasticity: a simple planar model10.1088/0965-0393/3/5/008 ↗
21. 〈a〉 Prismatic, 〈a〉 basal, and 〈c+a〉 slip strengths of commercially pure Zr by micro-cantilever tests10.1016/j.actamat.2015.06.020 ↗
22. Fracture toughness of zircaloy cladding tubes
23. Interaction of cracks with precipitates and grain boundaries: understanding crack growth mechanisms through focused ion beam tomography10.1016/j.scriptamat.2006.12.025 ↗
24. Effect of hydride orientation on fracture toughness of Zircaloy-4 cladding10.1016/j.jnucmat.2010.10.068 ↗
25. Simulation of stage I-short crack propagation in forged Ti6Al4V10.1016/j.proeng.2010.03.183 ↗
26. Embrittlement of reactor core materials
27. Focused ion-beam tomography10.1007/s11661-004-0142-4 ↗
28. Crack interaction with microstructure10.1016/S1369-7021(07)70207-9 ↗
29. The J-integral applied to cyclic loading10.1016/0013-7944(75)90025-9 ↗
30. A finite element method for crack growth without remeshing10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J ↗
31. Microstructure-sensitive probabilistic modeling of HCF crack initiation and early crack growth in Ni-base superalloy IN100 notched components10.1016/j.ijfatigue.2011.09.014 ↗
32. Coarse slip model of fatigue10.1016/0001-6160(69)90099-6 ↗
33. A nonlocal coupled damage-plasticity model for the analysis of ductile failure10.1016/j.ijplas.2014.08.001 ↗
34. Discrete dislocation modeling of fracture in plastically anisotropic metals10.1016/j.jmps.2013.02.001 ↗
35. A rational analytic theory of fatiuge
36. Analysis of crack tip plasticity for microstructurally small cracks using crystal plasticity theory10.1016/S0013-7944(02)00204-7 ↗
37. Three dimensional experimental and numerical multiscale analysis of a fatigue crack10.1016/j.cma.2009.09.013 ↗
38. Fracture toughness of hydrided zircaloy-4 sheet under through-thickness crack growth conditions10.1520/JAI101183 ↗
39. Path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
40. Assessing reliability of fatigue indicator parameters for small crack growth via a probabilistic framework10.1088/1361-651X/aa6c45 ↗
41. Predicting the 3D fatigue crack growth rate of small cracks using multimodal data via Bayesian networks: in-situ experiments and crystal plasticity simulations10.1016/j.jmps.2018.03.007 ↗
42. Short crack growth and internal stresses10.1016/S0142-1123(97)00057-1 ↗
43. Influence of microstructural barriers on small fatigue crack growth in mild steel10.1016/j.ijfatigue.2012.11.006 ↗
44. The fatigue behaviour of α-zirconium and Zircaloy-2 in the temperature range 20–700 °C10.1016/0022-3115(77)90176-3 ↗
45. Effect of texture on fracture toughness in extruded AZ31 magnesium alloy10.1016/j.scriptamat.2005.04.048 ↗
46. A method for dynamic crack and shear band propagation with phantom nodes10.1002/nme.1652 ↗
47. The effect of grain size on small fatigue crack growth in pure titanium10.1016/0142-1123(94)90483-9 ↗
48. Fatigue behaviour and fracture mechanism of a rolled AZ31 magnesium alloy10.1016/j.ijfatigue.2004.03.015 ↗
49. Three-dimensional microstructural characterization using focused ion beam tomography10.1557/mrs2007.64 ↗
50. Walker · 1974
51. A stored energy criterion for fatigue crack nucleation in polycrystals10.1016/j.ijfatigue.2014.06.001 ↗
52. Integrated experiment and modelling of microstructurally-sensitive crack growth10.1016/j.ijfatigue.2016.05.027 ↗
53. Modelling the threshold conditions for propagation of stage I fatigue cracks10.1016/S1359-6454(97)00290-5 ↗
54. A crystallographic mechanism for fatigue crack propagation through grain boundaries10.1016/S1359-6454(00)00214-7 ↗
55. Rate sensitivity in discrete dislocation plasticity in hexagonal close-packed crystals10.1016/j.actamat.2016.01.035 ↗