journal article·2005-10

Experimental characterization and micromechanical modeling of superelastic response of a porous NiTi shape-memory alloy

Sia Nemat-Nasser, Yu Su, Wei-Guo Guo, Jon Isaacs

Publisher page

Abstract

Abstract Porous shape-memory alloys are usually brittle due to the presence of various nickel–titanium intermetallic compounds that are produced in the course of most commonly used synthesizing techniques. We consider here a porous NiTi shape-memory alloy (SMA), synthesized by spark-plasma sintering, that is ductile and displays full shape-memory effects over the entire appropriate range of strains. The porosity however is only 12% but the basic synthesizing technique has potential for producing shape-memory alloys with greater porosity that still are expected to display superelasticity and shape-memory effects. The current material has been characterized experimentally using quasi-static and dynamic tests at various initial temperatures, mostly within the superelastic strain range, but also into the plastic deformation regime of the stress-induced martensite phase. To obtain a relatively constant strain rate in the high strain-rate tests, a novel pulse-shaping technique is introduced. The results of the quasi-static experiments are compared with the predictions by a model that can be used to calculate the stress–strain response of porous NiTi shape-memory alloys during the austenite-to-martensite and reverse phase transformations in uniaxial quasi-static loading and unloading at constant temperatures. In the austenite-to-martensite transformation, the porous shape-memory alloy is modeled as a three-phase composite with the parent phase (austenite) as the matrix and the product phase (martensite) and the voids as the embedded inclusions, reversing the roles of austenite and martensite during the reverse transformation from fully martensite to fully austenite phase. The criterion of the stress-induced martensitic transformation and its reversal is based on equilibrium thermodynamics, balancing the thermodynamic driving force for the phase transformation, associated with the reduction of Gibbs’ free energy, with the resistive force corresponding to the required energy to create new interface surfaces and to overcome the energy barriers posed by various microstructural obstacles. The change in Gibbs’ free energy that produces the driving thermodynamic force for phase transformation is assumed to be due to the reduction of mechanical potential energy corresponding to the applied stress, and the reduction of the chemical energy corresponding to the imposed temperature. The energy required to overcome the resistance imposed by various nano- and subnano-scale defects and like barriers, is modeled empirically, involving three constitutive constants that are then fixed based on the experimental data. Reasonably good correlation is obtained between the experimental and model predictions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Nonlocal and gradient elasticity in micro/nano structures · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A continuum model of a thermoelastic solid capable of undergoing phase transformations10.1016/0022-5096(93)90048-K ↗
2. Effects of nitinol implant porosity on cranial bone ingrowth and apposition after 6 weeks10.1002/(SICI)1097-4636(199904)45:1<42::AID-JBM6>3.0.CO;2-Q ↗
3. Berkowitz, A., 2004. Private communication.10.12946/rg04/022-027 ↗
4. Thermomechanical constitutive equations for shape memory alloys10.1051/jp4:1991458 ↗
5. The crystallography of martensitic transformations10.1016/0001-6160(54)90102-9 ↗
6. Interfacial motion in shape memory alloys10.1051/jp4:1991470 ↗
7. Modeling porous shape memory alloys using micromechanical averaging techniques10.1016/S0167-6636(01)00088-6 ↗
8. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
9. Kinetics of F.C.C.-B.C.C. heterogeneous martensitic nucleation—I. The critical driving force for athermal nucleation10.1016/0956-7151(94)90468-5 ↗
10. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
11. Double-inclusion model and overall moduli of multiphase composites10.1016/0167-6636(93)90066-Z ↗
12. The connections between the double-inclusion model and the Ponte Castaneda–Willis, Mori–Tanaka, and Kuster–Toksoz model10.1016/S0167-6636(00)00015-6 ↗
13. Khachaturyan · 1983
14. Velocity and attenuation of seismic waves in two-phase media: I theoretical formulation10.1190/1.1440450 ↗
15. Processing and characterization of NiTi porous SMA by elevated pressure sintering10.1177/1045389X02013012009 ↗
16. Lagoudas, D.C., Entchev, P.B., Vandygriff, E.L., Qidwai, M.A., DeGiorgi, V.G., 2000. Modeling of thermomechanical response of porous shape memory alloys. Proc. SPIE-Int. Soc. Opt. Eng. 496–508.10.1117/12.388233 ↗
17. Lagoudas, D.C., Entchev, P.B., Vandygriff, E.L., 2001. Fabrication, modeling and characterization of porous shape memory alloys. Proc. SPIE-Int. Soc. Opt. Eng.10.1117/12.432750 ↗
18. Phase transformations in elastoplastic materials: continuum thermomechanical theory and examples of control—Part I10.1016/S0022-5096(96)00123-8 ↗
19. Thermomechanical theory of martensitic phase transformations in inelastic materials10.1016/S0020-7683(97)00089-9 ↗
20. Levitas, V.I, Shvedov, L.K., 2002. Low-pressure phase transformation from rhombohedral to cubic BN: experiment and theory. Phys. Rev. B 65, 104109.10.1103/PhysRevB.65.104109 ↗
21. Some remarks on the modeling of the thermomechanical behaviour of shape memory alloys10.1051/jp4:1991404 ↗
22. A micromechanics-based hysteresis model for ferroelectric ceramics10.1106/CK2A-WA5V-27VK-V88E ↗
23. Micromechanics simulation of spontaneous polarization in ferroelectric crystals10.1063/1.1388567 ↗
24. Porous NiTi alloy prepared from elemental powder sintering10.1557/JMR.1998.0389 ↗
25. Transformation behavior of sintered porous NiTi alloys
26. Synthesis of porous Ni-Ti SMA by SHS: reaction mechanism and anisotropy in pore structure10.1016/S1359-6454(00)00184-1 ↗
27. Martensitic transformation and stress–strain relations of shape-memory alloys10.1016/S0022-5096(97)00022-7 ↗
28. A self-consistent model for the stress–strain behavior of shape-memory alloy polycrystals10.1016/S1359-6454(98)00203-1 ↗
29. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
30. Mura · 1987
31. Nemat-Nasser · 2004
32. Strain rate dependence of deformation mechanisms in a Ni–Ti–Cr shape-memory alloy10.1016/j.actamat.2004.10.001 ↗
33. Nemat-Nasser · 1993
34. Nemat-Nasser · 1999
35. Hopkinson techniques for dynamic recovery experiments10.1098/rspa.1991.0150 ↗
36. Very high strain-rate response of a NiTi shape-memory alloy10.1016/j.mechmat.2004.03.007 ↗
37. High strain-rate, small strain response of a NiTi shape-memory alloy10.1115/1.1839215 ↗
38. The effect of spatial distribution on the effective behavior of composite materials and cracked media10.1016/0022-5096(95)00058-Q ↗
39. Modeling of the thermomechanical behavior of porous shape memory alloys10.1016/S0020-7683(01)00118-4 ↗
40. Thermodynamics of isotropic pseudoelasticity in shape memory alloys10.1016/S0997-7538(98)80082-X ↗
41. Thermodynamic models of pseudoelastic behaviour of shape memory alloys
42. Shabalovskaya, S.A., Itin, V.I., Gyunter, V.E., 1994. Porous Ni–Ti—a new material for implants and prostheses. Proceedings of the First International Conference on Shape Memory and Superelastic Technologies, pp. 7–12.
43. Micromechanics modeling for the constitutive behavior of polycrystalline shape memory alloys—I. Derivation of general relations10.1016/0022-5096(93)90060-S ↗
44. Taya, M., 2004. Private communication.
45. On the theory of formation of martensite