Mechanical modeling of innovative metamaterials alternating pentamode lattices and confinement plates
Source abstract
Abstract
This study examines the mechanical behavior of a novel class of mechanical metamaterials alternating pentamode lattices and stiffening plates. The unit cell of such lattices consists of a sub-lattice of the face cubic-centered unit cell typically analyzed in the current literature on pentamode materials. The studied systems exhibit only three soft deformation modes in the infinitesimal stretch-dominated regime, as opposed to the five zero-energy modes of unconfined pentamode lattices. We develop analytical formulae for the vertical and bending stiffness properties and study the dependence of such quantities on the main design parameters: the lattice constant, the solid volume fraction, the cross-section area of the rods, and the layer thickness. A noteworthy result is that the effective compression modulus of the analyzed structures is equal to two thirds of the Young modulus of the stiffest isotropic elastic networks currently available in the literature, being accompanied by zero-rigidity against infinitesimal shear and twisting mechanisms. The use of the proposed metamaterials as novel seismic-isolation devices and impact-protection equipment is discussed by drawing comparisons with the response of alternative devices already available or under development.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Fluid Dynamics Simulations and Interactions · Advanced Materials and Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Experimental response of additively manufactured metallic pentamode materials confined between stiffening plates10.1016/j.compstruct.2016.01.091 ↗
2. Bending dominated response of layered mechanical metamaterials alternating pentamode lattices and confinement plates10.1016/j.compstruct.2016.07.031 ↗
3. Non-linear elastic response of layered structures, alternating pentamode lattices and confinement plates
4. Effects of vertical load, strain rate and cycling on the response of lead-rubber seismic isolators10.1080/13632460802598529 ↗
5. An elastomechanical unfeelability cloak made of pentamode metamaterials10.1038/ncomms5130 ↗
6. Latticed pentamode acoustic cloak10.1038/srep15745 ↗
7. Chilton · 2000
8. CSI, 2015. Computers & Structures, Inc., Analysis reference manual for SAP2000® version 18.Berkeley, California, USA, June.
9. On stress-dependent elastic moduli and wave speeds10.1093/imamat/hxs003 ↗
10. EN 10210-2, 2006. Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties.
11. European Committee for Standardization, 2009. Anti-seismic devices, EN 15129. Brussels, Belgium.
12. Solitary waves on tensegrity lattices10.1016/j.jmps.2012.02.007 ↗
13. Multiscale tunability of solitary wave dynamics in tensegrity metamaterials10.1063/1.4902071 ↗
14. Fraternali, F., Carpentieri, G., Montuori, R., Amendola, A., Benzoni, G., 2015. On the use of mechanical metamaterials for innovative seismic isolation systems. In: Compdyn 2015 - Proceedings of the 5th Eccomas Thematic Conference on Computational Methods. In: Structural Dynamics and Earthquake Engineering, pp. 349–358.10.7712/120115.3401.636 ↗
15. On the mechanical modeling of the extreme softening/stiffening response of axially loaded tensegrity prisms10.1016/j.jmps.2014.10.010 ↗
16. Gurtin · 1981
17. Stiffest elastic networks10.1098/rspa.2013.0611 ↗
18. Basic characteristics and durability of low-friction sliding bearings for base isolation
19. Pentamodal property and acoustic band gaps of pentamode metamaterials with different cross-section shapes10.1016/j.physleta.2016.01.041 ↗
20. The structural performance of the periodic truss10.1016/j.jmps.2005.10.008 ↗
21. On anisotropic versions of three-dimensional pentamode metamaterials10.1088/1367-2630/15/2/023029 ↗
22. Kelly · 1993
23. Wave mitigation in ordered networks of granular chains10.1016/j.jmps.2014.08.004 ↗
24. Phonon band structures of three-dimensional pentamode metamaterials10.1103/PhysRevB.86.155116 ↗
25. The mechanics of traumatic brain injury: a review of what we know and what we need to know for reducing its societal burden10.1115/1.4026364 ↗
26. Strong, lightweight and recoverable three-dimensional ceramic nanolattices10.1126/science.1255908 ↗
27. Complete characterization of the macroscopic deformations of periodic unimode metamaterials of rigid bars and pivots10.1016/j.jmps.2012.08.011 ↗
28. Adaptable nonlinear bimode metamaterials using rigid bars, pivots, and actuators10.1016/j.jmps.2012.08.012 ↗
29. Which elasticity tensors are realizable?10.1115/1.2804743 ↗
30. Nesterenko · 2001
31. Mechanics of elastic networks10.1098/rspa.2014.0522 ↗
32. Solitary waves in a peridynamic elastic solid10.1016/j.jmps.2016.06.001 ↗
33. Skinner · 1993
34. High-amplitude elastic solitary wave propagation in 1-D granular chains with preconditioned beads: experiments and theoretical analysis10.1016/j.jmps.2014.08.002 ↗
35. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗