A novel self-locked energy absorbing system
Source abstract
Abstract
Metallic thin-walled round tubes are widely used as energy absorption elements. However, lateral splash of the round tubes under impact loadings reduces the energy absorption efficiency and may cause secondary damages. Therefore, it is necessary to assemble and fasten round tubes together by boundary constraints and/or fasteners between tubes, which increases the time and labor cost and affects the mechanical performance of round tubes. In an effort to break through this limitation, a novel self-locked energy-absorbing system has been proposed in this paper. The proposed system is made up of thin-walled tubes with dumbbell-shaped cross section, which are specially designed to interlock with each other and thus provide lateral constraint under impact loadings. Both finite element simulations and impact experiment demonstrated that without boundary constraints or fasteners between tubes, the proposed self-locked energy-absorbing system can still effectively attenuate impact loads while the round tube systems fail to carry load due to the lateral splashing of tubes. Furthermore, the optimal geometric design for a single dumbbell-shaped tube and the optimal stacking arrangement for the system are discussed, and a general guideline on the structural design of the proposed self-locked energy absorbing system is provided.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · Transportation Safety and Impact Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Quasi-static axial and lateral crushing of radial corrugated composite tubes10.1016/j.tws.2007.07.018 ↗
2. Abrahamson, G., Goodier, J., Dynamic plastic flow buckling of a cylindrical shell from uniform radial pulse. In: Proceedings of the 4th U.S. National Congress of Applied Mechanics, Berkeley, CA 1962 939 950.
3. Thin-walled structures as impact energy absorbers10.1016/S0263-8231(02)00082-4 ↗
4. An approximate analysis of the collapse of thin cylindrical shells under axial loading10.1093/qjmam/13.1.10 ↗
5. Collapsible impact energy absorbers: an overview10.1016/S0263-8231(00)00048-3 ↗
6. Crush analysis and multi-objective optimization design for circular tube under quasi-static lateral loading10.1016/j.tws.2014.08.018 ↗
7. Quasi-static response and multi-objective crashworthiness optimization of oblong tube under lateral loading10.1016/j.tws.2014.03.012 ↗
8. Lateral collapse of short‐length sandwich tubes compressed by different indenters and exposed to external constraints10.1002/mawe.201400236 ↗
9. Impact comminution of solids due to progressive crack growth driven by kinetic energy of high-rate shear10.1115/1.4029636 ↗
10. Burton · 1963
11. Carney, J., III, 2010. Motorway impact attenuation devices: past, present and future, Structural Crashworthiness and Failure. In: Proceedings of the Third International Symposium on Structural Crashworthiness held at the University of Liverpool. CRC Press, England, vol. 366, pp. 14–16, April
12. Carney, J.F., III, 1987. Stationary Impact Attenuation System, US Patent 4,645,375
13. Energy absorption performance of steel tubes enhanced by a nanoporous material functionalized liquid10.1063/1.2405852 ↗
14. Experimental investigation on the dynamic response of scaled ship model with rubber sandwich coatings subjected to underwater explosion10.1016/j.ijimpeng.2007.12.015 ↗
15. Energy-dissipation characteristics of steel tubes10.1007/BF02320142 ↗
16. Crushing of a tube between rigid plates10.1115/1.3636567 ↗
17. Mechanical response of metallic honeycomb sandwich panel structures to high-intensity dynamic loading10.1016/j.ijimpeng.2007.06.008 ↗
18. Growth of buckling instabilities during radial collapse of a ring10.1115/1.2928600 ↗
19. Dutton, T., Iregbu, S., Sturt, R., Kellicut, A., Cowell, B., Kavikondala, K., 1999. The Effect of Forming on the Crashworthiness of Vehicles with Hydroformed Frame Siderails. SAE Technical Paper.10.4271/1999-01-3208 ↗
20. The topological design of multifunctional cellular metals10.1016/S0079-6425(00)00016-5 ↗
21. Experimental study of corrugated tubes under lateral loading
22. An assessment of energy absorbing devices for prospective use in aircraft impact situations
23. Investigation of lateral crushing of sandwich tubes10.1016/j.proeng.2011.07.055 ↗
24. The resistance of clamped sandwich beams to shock loading10.1115/1.1629109 ↗
25. Dynamic plastic buckling of copper cylindrical shells10.1016/0020-7683(91)90147-8 ↗
26. Gibson · 1997
27. Study of lateral compression of round metallic tubes10.1016/j.tws.2004.12.002 ↗
28. A numerical model for bird strike of aluminium foam-based sandwich panels10.1016/j.ijimpeng.2004.09.004 ↗
29. Inertia effects in impact energy absorbing materials and structures10.1016/S0734-743X(99)00037-8 ↗
30. Energy absorption of foam-filled circular tubes with braided composite walls10.1016/S0997-7538(00)00158-3 ↗
31. Numerical and experimental investigations on the axial crushing response of composite tubes10.1016/j.compstruct.2009.05.006 ↗
32. Johnson · 1978
33. Jones · 2011
34. Dynamic plastic buckling of rings and cylindrical shells10.1016/0029-5493(76)90057-1 ↗
35. Jones, N., Wierzbicki, T., 2010. Structural Crashworthiness and Failure. In: Proceedings of the Third International Symposium on Structural Crashworthiness held at the University of Liverpool. CRC Press, England,14–16 April.
36. Knoell, A.C., Wilson, A.H., 1978. Vehicular Impact Absorption System. US Patent 4,118,014.
37. Static and dynamic axial crushing of square thin-walled aluminium extrusions10.1016/S0734-743X(96)00025-5 ↗
38. Dynamic plastic pulse buckling beyond strain-rate reversal10.1115/1.3423591 ↗
39. Dynamic plastic buckling of a thin cylindrical shell containing an elastic core10.1115/1.3627319 ↗
40. Lindberg · 1987
41. Dynamic energy absorption characteristics of hollow microlattice structures10.1016/j.mechmat.2014.06.008 ↗
42. Quasi-static crush behavior of hollow microtruss filled with NMF liquid10.1016/j.compstruct.2014.03.047 ↗
43. Enhanced stiffness, strength and energy absorption for co-continuous composites with liquid filler10.1016/j.compstruct.2015.03.064 ↗
44. Lu · 2003
45. FEA of oblique impact tests on a motorcycle helmet10.1016/j.ijimpeng.2008.12.011 ↗
46. Analysis of nested tube type energy absorbers with different indenters and exterior constraints10.1016/j.tws.2006.08.014 ↗
47. Lateral crushing of circular and non-circular tube systems under quasi-static conditions10.1016/j.jmatprotec.2007.03.006 ↗
48. An experimental and numerical investigation on tyre impact10.1016/j.ijimpeng.2009.10.001 ↗
49. Experimental investigation on the lateral compression in the foam-filled circular tubes10.1016/j.matdes.2011.10.047 ↗
50. Metallic tube type energy absorbers: a synopsis10.1016/j.tws.2007.05.003 ↗
51. Optimised design of nested oblong tube energy absorbers under lateral impact loading10.1016/j.ijimpeng.2006.11.007 ↗
52. Crashworthiness analysis and design of multi-cell hexagonal columns under multiple loading cases10.1016/j.finel.2015.06.004 ↗
53. Some topics in recent advances and applications of structural impact dynamics10.1115/1.4005571 ↗
54. Rawlings, B., 1974. Response of structures to dynamic loads. In: Proceedings of Conference on Mechanical Properties of Materials at High Rates of Strain, Institute of Physics, pp. 279-298.
55. Lateral compression of tubes and tube-systems with side constraints10.1016/0020-7403(79)90023-7 ↗
56. Redwood, R., 1964. Discussion: “Crushing of a Tube Between Rigid Plates” (DeRuntz, Jr., John A., and Hodge, Jr., PG, 1963, ASME J. Appl. Mech., 30, pp. 391–395). J. Appl. Mech. vol. 31, pp. 357–358.10.1115/1.3629622 ↗
57. Reid, S. Reddy, T.Y., 1980. Effects of strain rate on the dynamic lateral compression of tubes. In: Proceedings of 2nd Conference. Mechanical Properties of Materials at High Rates of Strain. Oxford, England, Mar. 1979, pp. 288–298
58. Reid, S.R., Bell, W.W., 1984. Response of one-dimensional metal ring systems to end impact. Inst. Phys. Conf. Ser., 70 ed, pp. 471-478.
59. Effect of strain hardening on the lateral compression of tubes between rigid plates10.1016/0020-7683(78)90026-4 ↗
60. Lateral plastic collapse of sandwich tubes with metal foam core10.1016/j.ijmecsci.2013.11.016 ↗
61. Lateral crushing in tightly packed arrays of thin-walled metal tubes10.1016/0020-7403(86)90014-7 ↗
62. The impact energy dissipation of cylindrical systems
63. Shukla · 2010
64. Viscous energy dissipation of kinetic energy of particles comminuted by high-rate shearing in projectile penetration, with potential ramification to gas shale10.1007/s10704-015-0019-0 ↗
65. Symonds, P., 1965. Viscoplastic behaviour in response of structures to dynamic loading. Behavior of Materials Under Dynamic Loading. pp. 106–124.
66. Internally nested circular tube system subjected to lateral impact loading10.1016/j.tws.2015.02.014 ↗
67. Energy absorption for a truck-front bumper bar10.1533/cras.1996.0019 ↗
68. Progress in braided composite tube crush simulation10.1016/j.ijimpeng.2008.09.006 ↗
69. Mitigating impact/blast energy via a novel nanofluidic energy capture mechanism10.1016/j.jmps.2013.09.022 ↗
70. Reconstruction model of vehicle impact speed in pedestrian–vehicle accident10.1016/j.ijimpeng.2008.11.008 ↗
71. Experimental and FEM study of windshield subjected to high speed bird impact10.1007/BF02484547 ↗
72. Impact energy absorbing devices based upon the plastic deformation of metallic elements