journal article·2013-12

Equivalent mechanical properties of textile monolayers from discrete asymptotic homogenization

Ibrahim Goda, Mohamed Assidi, Jean-François Ganghoffer

Publisher page

Abstract

The determination of the effective mechanical moduli of textiles from mechanical measurements is usually difficult due to their discrete architecture, which makes micromechanical analyses a relevant alternative to access those properties. Micropolar continuum models describing the effective mechanical behavior of woven fabric monolayers are constructed from the homogenization of an identified repetitive pattern of the textile within a representative unit cell. The interwoven yarns within the textile are represented as a network of trusses connected by nodes at their crossover points. These trusses have extensional and bending rigidities to allow for yarn stretching and flexion, and a transverse shear deformation is additionally considered. Interactions between yarns at the crossover points are captured by beam segments connecting the nodes. The woven fabric is modeled after homogenization as an anisotropic planar continuum with two preferred material directions in the mean plane of the textile. Based on the developed methodology, the effective mechanical properties of plain weave and twill are evaluated, including their bending moduli and characteristic flexural lengths. A satisfactory agreement is obtained between the effective moduli obtained by homogenization and numerical values obtained by finite element simulations performed over periodic unit cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Mechanical Behavior of Composites · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Equivalent properties of monolayer fabric from mesoscopic modelling strategies10.1016/j.ijsolstr.2011.06.010 ↗
2. Bakhvalov · 1989
3. Finite deformation of elastic–plastic filamentary networks10.1016/S0020-7462(02)00083-5 ↗
4. Consideration of the yarn–yarn interactions in meso/macro discrete model of the fabric. Part I: single yarn behavior10.1016/j.mechrescom.2007.02.003 ↗
5. Consideration of the yarn–yarn interactions in meso/macro discrete model of the fabric, Part II: woven fabric under uniaxial and biaxial extension10.1016/j.mechrescom.2007.02.002 ↗
6. Discrete woven structure model: yarn-on-yarn friction10.1016/j.crme.2007.02.006 ↗
7. Discrete models of woven structures. Macroscopic approach10.1016/j.compositesb.2006.01.007 ↗
8. Bensoussan · 1978
9. Finite element simulations of textile composite forming including the biaxial fabric behaviour10.1016/S1359-8368(96)00067-4 ↗
10. Analyses of fabric tensile behaviour: determination of the biaxial tension–strain surfaces and their use in forming simulations10.1016/S1359-835X(01)00039-2 ↗
11. A mesoscopic approach for the simulation of woven fibre composite forming10.1016/j.compscitech.2004.09.024 ↗
12. Importance of in-plane shear rigidity in finite element analyses of woven fabric composite preforming10.1016/j.compositesa.2005.09.018 ↗
13. Discrete homogenization in graphene sheet modeling10.1007/s10659-006-9053-5 ↗
14. Homogenization and damage for composite structures10.1002/nme.1620270206 ↗
15. Equivalent mechanical properties of auxetic lattices from discrete homogenization10.1016/j.commatsci.2011.07.014 ↗
16. Finite element modeling of transverse impact on a ballistic fabric10.1016/j.ijmecsci.2005.09.007 ↗
17. Modélisation par éléments finis des propriétés mécaniques de structures textiles: de la fibre au tissu
18. Computational damage mechanics for composite materials based on mathematical homogenisation10.1002/(SICI)1097-0207(19990820)45:11<1657::AID-NME648>3.0.CO;2-H ↗
19. Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods10.1016/0045-7825(90)90148-F ↗
20. A semi-discrete shell finite element for textile composite reinforcement forming simulation10.1002/nme.2625 ↗
21. Hearle · 1969 · 1
22. Modelling fabric mechanics10.1080/00405000108659614 ↗
23. A comparison of homogenization and standard mechanics analysis for periodic porous composites10.1007/BF00369853 ↗
24. Loosely woven fabric model with viscoelastic crimped fibres for ballistic impact simulations10.1002/nme.1113 ↗
25. Jeguirim · 2008
26. Multiscale methods for composites: a review10.1007/s11831-008-9028-8 ↗
27. Formulation of constitutive equations for fabric membranes based on the concept of fabric lattice model10.1016/S0141-0296(98)00024-8 ↗
28. The finite-deformation theory of plain-weave fabrics. Part I: The biaxial-deformation theory10.1080/00405007308630416 ↗
29. The finite-deformation theory of plain-weave fabrics. Part II: The uniaxial-deformation theory10.1080/00405007308630417 ↗
30. The finite-deformation theory of plain-weave fabrics. Part III: The shear-deformation theory10.1080/00405007308630418 ↗
31. A continuum constitutive model for the mechanical behavior of woven fabrics10.1016/j.ijsolstr.2004.10.030 ↗
32. Experimental methods for study of Cosserat elastic solids and other generalized elastic continua
33. Meso-FE modelling of textile composites: road map, data flow and algorithms10.1016/j.compscitech.2006.10.017 ↗
34. Mourad, A., 2003. Description Topologique de L'architecture Fibreuse et Modelisation Mecanique du Myocarde (Ph.D. thesis). I.N.P.L. Grenoble.
35. Numerical and experimental determination of the in-plane elastic properties of 2/2 Twill weave fabric composites10.1016/S1359-8368(98)00025-0 ↗
36. Asymptotic homogenisation in linear elasticity. Part II: finite element procedures and multiscale applications10.1016/j.commatsci.2009.01.027 ↗
37. Impact of woven fabric: experiments and mesostructure-based continuum-level simulations10.1016/j.jmps.2010.05.006 ↗
38. The geometry of cloth structure
39. Numerical determination of mechanical elastic constants of textile composites
40. A dual homogenization and finite element approach for material characterization of textile composites10.1016/S1359-8368(01)00052-X ↗
41. A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics10.1016/j.compositesa.2004.08.008 ↗
42. Elastic lattices: equilibrium, invariant laws and homogenization10.1007/s11565-008-0054-0 ↗
43. Rattensperger, H., Eberhardsteiner, J., Mang, H.A., 2003. Numerical investigation of high pressure hydraulic hoses with steel wire braid. In: Proceedings of the IUTAM Symposium on Computational Mechanics of Solid Materials at Large Strains, pp. 407–416.10.1007/978-94-017-0297-3_37 ↗
44. Realff, M.L., 1992. Mechanical Properties of Fabrics Woven from Yarns Produced by Different Spinning Technologies (Ph.D. Thesis). Massachusetts Institute of Technology.
45. A micromechanical model of the tensile behavior of woven fabric10.1177/004051759706700609 ↗
46. Mesoscale modelling of interlaced fibre assemblies using energy method10.1016/S0927-0256(03)00056-9 ↗
47. Sanchez-Palencia · 1980
48. A continuum shell finite element model for impact simulation of woven fabrics10.1016/j.ijimpeng.2006.06.010 ↗
49. Shockey, D.A., Elrich, D.C., Simons, J.W., 1999a. Improved Barriers to Turbine Engine Fragments: Interim Report I. DOT/FAA AR-99/8,I.
50. Shockey, D.A., Elrich, D.C., Simons, J.W., 1999b. Improved Barriers to Turbine Engine Fragments: Interim Report II. DOT/FAA AR-99/8,II.
51. Shockey, D.A., Elrich, D.C., Simons, J.W., 2001. Improved Barriers to Turbine Engine Fragments: Interim Report III. DOT/FAA AR-99/8,III.
52. Comparative study of predictive methods for woven fabric composite elastic properties10.1016/S0263-8223(02)00028-4 ↗
53. Finite element evaluation of projectile nose angle effects in ballistic perforation of high strength fabric10.1016/j.compstruct.2008.02.009 ↗
54. Finite element modeling of non-orthogonal loosely woven fabrics in advanced occupant restraint systems10.1016/S0168-874X(02)00078-1 ↗
55. A high-order mixture model for periodic particulate composites10.1016/0020-7683(87)90092-8 ↗
56. A non-orthogonal constitutive model for characterizing woven composites10.1016/S1359-835X(02)00052-0 ↗
57. Integrated micro/macro-mechanical model of woven fabric composites under large deformation10.1016/j.compstruct.2004.08.013 ↗
58. Effect of frame size, frame type, and clamping pressure on the ballistic performance of soft body armor10.1016/j.compositesb.2007.04.002 ↗