journal article·2021-04Open access

Bayesian calibration of a physics-based crystal plasticity and damage model

Thao Nguyen, Devin C. Francom, D.J. Luscher, J.W. Wilkerson

Abstract

Abstract In this work, we present a model parameter calibration procedure for a physics-based crystal plasticity model. The calibration process utilizes a powerful statistics-based Bayesian calibration method. Calibration of the crystal plasticity parameters makes use of experimentally-measured data, i.e. compressive stress–strain response, from 〈 100 〉 and 〈 123 〉 single crystal copper dynamically loaded via Kolsky bar tests. The calibration of damage parameters is achieved using experimentally-measured free-surface velocity history data from plate impact test on 〈 100 〉 and 〈 110 〉 single crystal copper, which generates shock compression followed by dynamic tensile failure. A validation assessment is then carried out by comparing the calibrated model predictions and experimental measurements of the dynamic tensile damage generated in an impacted bicrystal copper plate. Lastly, a model-informed rationale for the experimentally-observed dependence of the spatial distribution of ductile damage (porosity) on crystallography is provided.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Parameter identification of a mechanical ductile damage using artificial neural networks in sheet metal forming10.1016/j.matdes.2012.09.032 ↗
2. Rate-dependent ductile failure model10.1063/1.354814 ↗
3. Evolving structure–property relationships in metals with nonequilibrium concentrations of vacancies10.1063/5.0004014 ↗
4. A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates10.1016/j.ijplas.2010.03.002 ↗
5. Parameterization of a rate-dependent model of shock-induced plasticity for copper, nickel, and aluminum10.1016/j.ijplas.2011.11.002 ↗
6. Modeling large deformation and failure in manufacturing processes
7. Uncertainty quantification in the mechanical response of crystal plasticity simulations10.1007/s11837-019-03551-3 ↗
8. A multiscale strength model for extreme loading conditions10.1063/1.3553718 ↗
9. Direct numerical simulation of ductile spall failure10.1007/s10704-017-0198-y ↗
10. Gradient-based optimization of hyperparameters10.1162/089976600300015187 ↗
11. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
12. Numerical modeling of damage evolution of dp steels on the basis of x-ray tomography measurements10.1016/j.mechmat.2011.02.005 ↗
13. The second sandia fracture challenge: predictions of ductile failure under quasi-static and moderate-rate dynamic loading10.1007/s10704-016-0089-7 ↗
14. The sandia fracture challenge: blind round robin predictions of ductile tearing10.1007/s10704-013-9904-6 ↗
15. Response and representation of ductile damage under varying shock loading conditions in tantalum10.1063/1.4941823 ↗
16. Characterization of ductile damage for a high carbon steel using 3d x-ray micro-tomography and mechanical tests–application to the identification of a shear modified gtn model10.1016/j.commatsci.2013.12.006 ↗
17. Static and dynamic pore-collapse relations for ductile porous materials10.1063/1.1661372 ↗
18. An iterative bayesian filtering framework for fast and automated calibration of dem models10.1016/j.cma.2019.01.027 ↗
19. Uncertainty quantification in multiscale simulation of materials: A prospective10.1146/annurev-matsci-071312-121708 ↗
20. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
21. Clayton · 2019
22. Identification of gurson–tvergaard material model parameters via kalman filtering technique. I. Theory10.1023/A:1007602106711 ↗
23. Modelling of dynamic ductile fracture and application to the simulation of plate impact tests on tantalum10.1016/j.jmps.2007.07.017 ↗
24. Identification strategy influence of elastoplastic behavior law parameters on gurson–tvergaard–needleman damage parameters: Application to dp980 steel10.1177/1056789518772130 ↗
25. Hybrid experimental–numerical analysis of basic ductile fracture experiments for sheet metals10.1016/j.ijsolstr.2009.12.011 ↗
26. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: application to cold-dwell fatigue in ti alloys10.1016/j.ijplas.2006.10.013 ↗
27. Eardley · 2005
28. Influence of boundary structure and near neighbor crystallographic orientation on the dynamic damage evolution during shock loading10.1080/14786435.2012.734638 ↗
29. Effects of grain size and boundary structure on the dynamic tensile response of copper10.1063/1.3607294 ↗
30. Every · 1992
31. Effect of loading direction on grain boundary failure under shock loading10.1016/j.actamat.2013.11.026 ↗
32. When do interfaces become important for failure?
33. Constitutive modelling of plasticity of fcc metals under extremely high strain rates10.1016/j.ijplas.2011.12.001 ↗
34. Gattiker · 2020
35. Gaussian process-based sensitivity analysis and bayesian model calibration with gpmsa
36. Goodwin · 2006
37. The automatic calibration of conceptual catchment models using derivative-based optimization algorithms10.1029/WR021i004p00473 ↗
38. Continuum theory of ductile rupture by void nucleation and growth: Part I-Yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
39. A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations10.1016/S0022-5096(01)00104-1 ↗
40. A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on densities of geometrically necessary dislocations10.1016/j.ijplas.2007.07.014 ↗
41. A finite-deformation, gradient theory of single-crystal plasticity with free energy dependent on the accumulation of geometrically necessary dislocations10.1016/j.ijplas.2010.02.002 ↗
42. Void growth and coalescence in fcc single crystals10.1016/j.ijmecsci.2010.03.001 ↗
43. A yield function for single crystals containing voids10.1016/j.ijsolstr.2013.02.005 ↗
44. Introducing bacco, an r package for bayesian analysis of computer code output10.18637/jss.v014.i16 ↗
45. A dislocation-based multi-rate single crystal plasticity model10.1016/j.ijplas.2012.12.006 ↗
46. Hasenpouth · 2010
47. Computer model calibration using high-dimensional output10.1198/016214507000000888 ↗
48. Simulation-aided inference in cosmology
49. Cavitation instabilities in elastic-plastic solids10.1016/0022-5096(91)90004-8 ↗
50. A conventional theory of mechanism-based strain gradient plasticity10.1016/j.ijplas.2003.08.002 ↗
51. Strain gradient plasticity10.1016/S0065-2156(08)70388-0 ↗
52. An experimental study of the mobility of edge dislocations in pure copper single crystals10.1080/14786437008238500 ↗
53. Dynamic fracture and spallation in ductile solids10.1063/1.329011 ↗
54. Tensile plasticity and ductile fracture10.1063/1.342000 ↗
55. Johnson, G.R., Cook, W.H., 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of the 7th International Symposium on Ballistics, Vol. 21, The Netherlands, pp. 541–547.
56. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures10.1016/0013-7944(85)90052-9 ↗
57. Spall fracture: methodological aspects, mechanisms and governing factors10.1007/s10704-009-9438-0 ↗
58. New data on the kinetics and governing factors of the spall fracture of metals
59. Bayesian calibration of computer models10.1111/1467-9868.00294 ↗
60. Finite dynamic deformations of an incompressible elastic medium containing a spherical cavity10.1007/BF00281326 ↗
61. The third sandia fracture challenge: predictions of ductile fracture in additively manufactured metal10.1007/s10704-019-00361-1 ↗
62. Three-dimensional characterization and modeling of microstructural weak links for spall damage in fcc metals10.1007/s11661-014-2667-5 ↗
63. Validation of void growth models using x-ray microtomography characterization of damage in dual phase steels10.1016/j.actamat.2011.08.046 ↗
64. Simulation of micro-indentation hardness of fcc single crystals by mechanism-based strain gradient crystal plasticity10.1016/j.ijplas.2010.01.011 ↗
65. Microstructural effects on damage evolution in shocked copper polycrystals10.1016/j.actamat.2016.06.054 ↗
66. A dislocation dynamics based higher-order crystal plasticity model and applications on confined thin-film plasticity10.1016/j.ijplas.2010.04.004 ↗
67. Simulation of shock wave propagation in single crystal and polycrystalline aluminum10.1016/j.ijplas.2014.04.012 ↗
68. Numerical failure analysis of a stretch-bending test on dual-phase steel sheets using a phenomenological fracture model10.1016/j.ijsolstr.2010.07.010 ↗
69. A dislocation density-based continuum model of the anisotropic shock response of single crystal α-cyclotrimethylene trinitramine10.1016/j.jmps.2016.09.005 ↗
70. A model for finite-deformation nonlinear thermomechanical response of single crystal copper under shock conditions10.1016/j.jmps.2013.05.002 ↗
71. Coupling continuum dislocation transport with crystal plasticity for application to shock loading conditions10.1016/j.ijplas.2015.07.007 ↗
72. A dislocation density based constitutive model for crystal plasticity fem including geometrically necessary dislocations10.1016/j.actamat.2006.01.005 ↗
73. Theoretical, numerical and identification aspects of a new model class for ductile damage10.1016/S0749-6419(00)00105-4 ↗
74. Concepts and computational methods for parameter identification of inelastic material models
75. Elastic-plastic deformation of molybdenum single crystals shocked along [100]10.1063/1.4974475 ↗
76. Mayeur · 2004
77. Uncertainty quantification for nuclear density functional theory and information content of new measurements10.1103/PhysRevLett.114.122501 ↗
78. Meyers · 1994
79. Effect of microstructural length scales on spall behavior of copper10.1007/s11661-004-0212-7 ↗
80. A physical model for nucleation and early growth of voids in ductile materials under dynamic loading10.1016/j.jmps.2005.02.010 ↗
81. Modeling the effects of grain and porosity structure on copper spall response
82. Work jardening and the pressure dependence of dislocation density and arrangements in shock loaded nickel and copper10.1016/0036-9748(78)90164-3 ↗
83. Residual microstructure-mechanical property relationships in shock-loaded metals and alloys
84. A dislocation-based crystal plasticity framework for dynamic ductile failure of single crystals10.1016/j.jmps.2017.07.020 ↗
85. The role of elastic and plastic anisotropy in intergranular spall failure10.1016/j.actamat.2019.01.033 ↗
86. A physics-based model and simple scaling law to predict the pressure dependence of single crystal spall strength10.1016/j.jmps.2020.103875 ↗
87. A calibration method for enhancing robot accuracy through integration of an extended kalman filter algorithm and an artificial neural network10.1016/j.neucom.2014.03.085 ↗
88. Save: an r package for the statistical analysis of computer models10.18637/jss.v064.i13 ↗
89. Orientation dependence of void formation and substructure deformation in a spalled copper bicrystal10.1016/j.scriptamat.2011.09.015 ↗
90. Pilch · 2006
91. Determination of the constants of gtn damage model using experiment, polynomial regression and kriging methods10.3390/app7111179 ↗
92. Integrated experimental and computational studies of deformation of single crystal copper at high strain rates10.1063/1.4903734 ↗
93. Nanovoid nucleation by vacancy aggregation and vacancy-cluster coarsening in high-purity metallic single crystals10.1103/PhysRevB.84.104117 ↗
94. Shock compression and release of a-axis magnesium single crystals: Anisotropy and time dependent inelastic response10.1063/1.4974365 ↗
95. Effect of stress triaxiality on porosity evolution in notched bars: Quantitative agreement between a recent dilatational model and x-ray tomography data10.1016/j.mechrescom.2013.04.005 ↗
96. A guide to bayesian calibration of building energy models
97. On the dynamically stored energy of cold work in pure single crystal and polycrystalline copper10.1016/j.actamat.2012.03.029 ↗
98. Epistemic uncertainty modeling of johnson-cook plasticity model using evidence theory
99. A new approach for determination of material constants of internal state variable based plasticity models and their uncertainty quantification10.1016/j.commatsci.2011.11.035 ↗
100. Coupling in situ experiments and modeling–opportunities for data fusion, machine learning, and discovery of emergent behavior