journal article·2021-09

A unified mechanistic model for Hall–Petch and inverse Hall–Petch relations of nanocrystalline metals based on intragranular dislocation storage

Quanfeng Han, Xin Yi

Publisher page

Abstract

Abstract Nanocrystalline (NC) metals often show transition from Hall–Petch (HP) strengthening to inverse HP softening as the average grain size decreases below a critical value. Compared to the HP behavior whose mechanism is well understood as the dislocation pile-up at grain boundaries (GBs), several hypotheses have been proposed to explain the veiled inverse HP behavior and no consensus has been reached yet. In this work, we propose a size-dependent model considering the influence of grain size on the intragranular dislocation storage ability and unify the HP and inverse HP relations for NC metals. The reduction of the intragranular dislocation storage ability with decreasing grain size is revealed as the underlying mechanism of the breakdown of the HP behavior in NC. Prediction of the critical grain size of 26 . 9 nm for the HP-inverse HP transition of NC copper agrees well with experimental results. Numerical results suggest that the harmonized deformation of GB and grain interior (GI) dominates the remarkable ductility enhancement of NC metals in the inverse HP region. Moreover, our results suggest that the formation of dimple structures spanning several grains at fracture surfaces of NC metals is attributed to the coalescence of inter- and intra-granular microcracks and microvoids in clustered grains with Goss texture in local shear bands. As the GB strength increases, NC metals show enhancement in yield strength and delay in occurrence of the inverse HP behavior. Our studies give new insight into the contribution of GB sliding to the plastic behaviors of NC metals, and provide valuable guidance for the rational design of NC metals with high ductility and high strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Hall–Petch revisited at the nanoscale10.1016/j.mseb.2009.05.010 ↗
2. A theory for amorphous viscoplastic materials undergoing finite deformations, with application to metallic glasses10.1016/j.jmps.2004.12.006 ↗
3. Mechanistic models for the activation volume and rate sensitivity in metals with nanocrystalline grains and nano-scale twins10.1016/j.actamat.2005.03.047 ↗
4. Bourgeois, S., Lejeunes, S., 2011. Une Toolbox Abaqus pour le calcul de propriétés effectives de milieux hétérogènes. In: 10th National Conference on Computational methods for Structures, Giens, France.
5. On the intrinsic ductility of electrodeposited nanocrystalline metals10.1007/s10853-011-5751-x ↗
6. What is behind the inverse Hall–Petch effect in nanocrystalline materials?10.1016/j.actamat.2007.02.021 ↗
7. On the validity of the Hall–Petch relationship in nanocrystalline materials10.1016/0036-9748(89)90342-6 ↗
8. A model for boundary diffusion controlled creep in polycrystalline materials10.1063/1.1702656 ↗
9. Effect of grain size from mm to nm on the flow stress and plastic deformation kinetics of Au at low homologous temperatures10.1016/j.msea.2005.06.051 ↗
10. Six decades of the Hall–Petch effect - a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
11. High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness10.1016/j.actamat.2011.07.046 ↗
12. A model for the inverse Hall-Petch relation of nanocrystalline materials10.1016/j.msea.2005.06.073 ↗
13. A statistical theory of probability-dependent precipitation strengthening in metals and alloys10.1016/j.jmps.2018.09.010 ↗
14. Analytical and computational description of effect of grain size on yield stress of metals10.1016/S1359-6454(01)00062-3 ↗
15. Hardness analysis of cubic metal mononitrides from first principles10.1103/PhysRevB.85.184106 ↗
16. Mechanical behavior of nanocrystalline copper10.1016/j.msea.2006.07.165 ↗
17. On the mechanistic origins of maximum strength in nanocrystalline metals10.1038/s41524-020-00425-0 ↗
18. The strain and grain size dependence of the flow stress of copper10.1016/0001-6160(82)90221-8 ↗
19. In situ tensile testing of nanoscale freestanding thin films inside a transmission electron microscope10.1557/JMR.2005.0220 ↗
20. Dimples on nanocrystalline fracture surfaces as evidence for shear plane formation10.1126/science.1084284 ↗
21. In situ transmission electron microscopy observations of toughening mechanisms in ultra-fine grained columnar aluminum thin films10.1557/JMR.2005.0233 ↗
22. Diffusional viscosity of a polycrystalline solid10.1063/1.1699681 ↗
23. Grain boundary stability governs hardening and softening in extremely fine nanograined metals10.1126/science.aal5166 ↗
24. Hall–Petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel10.1016/0036-9748(86)90219-X ↗
25. In-situ TEM tensile testing of DC magnetron sputtered and pulsed laser deposited Ni thin films10.1016/S1359-6454(02)00599-2 ↗
26. Deformation mechanisms in nanocrystalline palladium at large strains10.1016/j.actamat.2009.03.049 ↗
27. Molecular dynamics simulation study of the effect of grain size on the deformation behavior of nanocrystalline body-centered cubic iron10.1016/j.scriptamat.2010.11.019 ↗
28. Plastic deformation behaviour of fine-grained materials10.1016/S1359-6454(99)00353-5 ↗
29. Constitutive modelling of strength and plasticity of nanocrystalline metallic materials10.1016/S0921-5093(01)01246-1 ↗
30. Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy10.1016/j.jallcom.2016.04.185 ↗
31. Deformation of electrodeposited nanocrystalline nickel10.1016/S1359-6454(02)00421-4 ↗
32. Strain-dependent deformation behavior in nanocrystalline metals10.1103/PhysRevLett.101.015502 ↗
33. Deformation mechanism in nanocrystalline Al: Partial dislocation slip10.1063/1.1594836 ↗
34. Nanocrystalline gold with small size: inverse Hall-Petch between mixed regime and super-soft regime10.1080/14786435.2020.1765039 ↗
35. Effect of deformation temperature and strain rate on dynamic recrystallized grain size of a powder metallurgical nickel-based superalloy10.1016/j.jallcom.2016.08.216 ↗
36. Revealing the maximum strength in nanotwinned copper10.1126/science.1167641 ↗
37. Plasticity without dislocations in a polycrystalline intermetallic10.1038/s41467-019-11505-1 ↗
38. Dislocation generation from grain boundaries in nickel10.1002/pssa.2210110129 ↗
39. Effect of interstitial carbon on the mechanical properties of electrodeposited bulk nanocrystalline Ni10.1016/j.actamat.2013.02.025 ↗
40. Inverse Hall–Petch behavior in diamantane stabilized bulk nanocrystalline aluminum10.1016/j.actamat.2012.07.026 ↗
41. Grain size dependence of strength of nanocrystalline materials as exemplified by copper: an elastic-viscoplastic modelling approach10.1007/s10853-006-0670-y ↗
42. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
43. Grain size-dependent crystal plasticity constitutive model for polycrystal materials10.1016/j.msea.2017.07.087 ↗
44. In situ studies of the transmission of strain across grain boundaries10.1016/j.msea.2006.02.461 ↗
45. Hall–Petch relation in nanocrystalline solids10.1016/0956-716X(91)90256-Z ↗
46. Mechanical behavior of nanocrystalline metals10.1016/0965-9773(92)90074-8 ↗
47. Number of grains necessary to homogenize elastic materials with cubic symmetry10.1016/S0167-6636(02)00325-3 ↗
48. Nanomechanics of Hall–Petch relationship in nanocrystalline materials10.1016/j.pmatsci.2009.03.008 ↗
49. Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity10.1016/0022-5096(71)90010-X ↗
50. Plasticity of bcc micropillars controlled by competition between dislocation multiplication and depletion10.1016/j.actamat.2013.02.011 ↗
51. Elastic and tensile behavior of nanocrystalline copper and palladium10.1016/S1359-6454(97)00092-X ↗
52. Softening of nanocrystalline metals at very small grain sizes10.1038/35328 ↗
53. Inverse Hall–Petch relationship in nanocrystalline tantalum10.1016/j.msea.2013.05.024 ↗
54. Cube slip and non-Schmid effects in single crystal Ni-base superalloys10.1088/0965-0393/18/1/015005 ↗
55. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
56. Temperature dependence of the elastic constants10.1103/PhysRevB.2.3952 ↗
57. Walgraef · 1990
58. In situ observation of dislocation behavior in nanometer grains10.1103/PhysRevLett.105.135501 ↗
59. Enhanced strain-rate sensitivity in fcc nanocrystals due to grain-boundary diffusion and sliding10.1016/j.actamat.2007.12.028 ↗
60. A computational study of the mechanical behavior of nanocrystalline fcc metals10.1016/j.actamat.2006.03.007 ↗
61. Mechanical properties for irradiated face-centred cubic nanocrystalline metals10.1098/rspa.2014.0832 ↗
62. Deformation mechanism crossover and mechanical behaviour in nanocrystalline materials10.1080/09500830031000120891 ↗
63. Ultrahigh strength and high ductility of bulk nanocrystalline copper10.1063/1.2034122 ↗
64. Dislocations in grain boundary regions: the origin of heterogeneous microstrains in nanocrystalline materials10.1007/s11661-019-05492-7 ↗
65. High-pressure strengthening in ultrafine-grained metals10.1038/s41586-020-2036-z ↗