journal article·2016-01

Faults simulations for three-dimensional reservoir-geomechanical models with the extended finite element method

Jean H. Prévost, N. Sukumar

Publisher page

Abstract

Abstract Faults are geological entities with thicknesses several orders of magnitude smaller than the grid blocks typically used to discretize reservoir and/or over-under-burden geological formations. Introducing faults in a complex reservoir and/or geomechanical mesh therefore poses significant meshing difficulties. In this paper, we consider the strong-coupling of solid displacement and fluid pressure in a three-dimensional poro-mechanical (reservoir-geomechanical) model. We introduce faults in the mesh without meshing them explicitly, by using the extended finite element method (X-FEM) in which the nodes whose basis function support intersects the fault are enriched within the framework of partition of unity. For the geomechanics, the fault is treated as an internal displacement discontinuity that allows slipping to occur using a Mohr–Coulomb type criterion. For the reservoir, the fault is either an internal fluid flow conduit that allows fluid flow in the fault as well as to enter/leave the fault or is a barrier to flow (sealing fault). For internal fluid flow conduits, the continuous fluid pressure approximation admits a discontinuity in its normal derivative across the fault, whereas for an impermeable fault, the pressure approximation is discontinuous across the fault. Equal-order displacement and pressure approximations are used. Two- and three-dimensional benchmark computations are presented to verify the accuracy of the approach, and simulations are presented that reveal the influence of the rate of loading on the activation of faults.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Seismic Imaging and Inversion Techniques · Rock Mechanics and Modeling · Hydraulic Fracturing and Reservoir Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. A weighted nitsche stabilized method for small-sliding contact on frictional surfaces10.1016/j.cma.2014.09.030 ↗
2. An analysis of strong discontinuities in a saturated poro-plastic solid10.1002/(SICI)1097-0207(19991210)46:10<1673::AID-NME719>3.0.CO;2-S ↗
3. Shear strength criteria for rock, rock joints, rockfill and rock masses: problems and some solutions10.1016/j.jrmge.2013.05.008 ↗
4. General theory of three-dimensional consolidation10.1063/1.1712886 ↗
5. Theory of elasticity and consolidation for a porous anisotropic solid10.1063/1.1721956 ↗
6. Modeling of coupled deformation and permeability evolution during fault reactivation induced by deep underground injection of CO210.1016/j.ijggc.2010.08.005 ↗
7. Finite-difference modeling of faults and fractures10.1190/1.1443884 ↗
8. Coussy · 2004
9. A numerical approach for arbitrary cracks in a fluid-saturated medium10.1007/s00419-006-0023-y ↗
10. Permeability of fault-related rocks, and implications for hydraulic structure of fault zones10.1016/S0191-8141(97)00057-6 ↗
11. On the internal structure and mechanics of large strike-slip fault zones: field observations of the Carboneras fault in southeastern Spain10.1016/S0040-1951(03)00134-3 ↗
12. An efficient XFEM approximation of Darcy flows in arbitrarily fractured porous media10.2516/ogst/2013192 ↗
13. Simulation of non-planar three-dimensional hydraulic fracture propagation10.1002/nag.2305 ↗
14. Method of conjugate gradients for solving linear systems10.6028/jres.049.044 ↗
15. Hughes · 1987
16. Jaeger · 1969
17. Coupled multiphase flow and poromechanics: a computational model of pore pressure effects on fault slip and earthquake triggering10.1002/2013WR015175 ↗
18. A fracture mapping and extended finite element scheme for coupled deformation and fluid flow in fractured porous media10.1002/nag.2168 ↗
19. The partition of unity finite element method: Basic theory and applications10.1016/S0045-7825(96)01087-0 ↗
20. Internal structure and permeability of the Nojima fault, southwest Japan10.1016/j.jsg.2007.12.002 ↗
21. A computational approach to handle complex microstructure geometries10.1016/S0045-7825(03)00346-3 ↗
22. A finite element method for crack growth without remeshing10.1002/(SICI)1097-0207(19990910)46:1<131::AID-NME726>3.0.CO;2-J ↗
23. National Research Council · 2012
24. Coupled multi-phase thermo-poromechanical effects. Case study: CO2 injection at In Salah, Algeria10.1016/j.ijggc.2010.12.006 ↗
25. Stabilization procedures in coupled poromechanics problems: a critical assessment10.1002/nag.951 ↗
26. Fully coupled simulation of fluid injection into geomaterials with focus on nonlinear near-well behavior10.1002/nag.1039 ↗
27. Prevost, J.H., 1981. DYNAFLOW: a nonlinear transient finite element analysis program (last update 2013). Department of Civil and Environmental Engineering, Princeton University, Princeton, NJ.
28. Partitioned solution procedure for simultaneous integration of coupled-field problems10.1002/(SICI)1099-0887(199704)13:4<239::AID-CNM51>3.0.CO;2-2 ↗
29. Prevost, J.H., 2013. One-way versus two-way coupling in reservoir-geomechanical models. In: Hellmich, C., Pichler, B., Adam, D. (Eds.), Poromechanics V: Proceedings of the Fifth Biot Conference on Poromechanics, Vienna, Austria, July 10–12, 2013. American Society of Civil Engineers, pp. 517–526.
30. Two-way coupling in reservoir–geomechanical models: vertex-centered Galerkin geomechanical model cell-centered and vertex-centered finite volume reservoir models10.1002/nme.4657 ↗
31. A two-scale approach for fluid flow in fractured porous media10.1002/nme.1962 ↗
32. Geomechanical effects on CO2 leakage through fault zones during large-scale underground injection10.1016/j.ijggc.2013.11.001 ↗
33. Rubin, A.M., 2015 . Princeton University, Personal communication.
34. A method for 3-D hydraulic fracturing simulation10.1007/s10704-012-9742-y ↗
35. Modeling holes and inclusions by level sets in the extended finite-element method10.1016/S0045-7825(01)00215-8 ↗
36. Extended finite element method for three-dimensional crack modelling10.1002/1097-0207(20000820)48:11<1549::AID-NME955>3.0.CO;2-A ↗
37. Modeling quasi-static crack growth with the extended finite element method Part I: Computer implementation10.1016/j.ijsolstr.2003.08.002 ↗
38. A computational model for coupled multiphysics processes of CO2 sequestration in fractured porous media10.1016/j.advwatres.2013.06.012 ↗
39. Die Berechnung der Durchassigkeitsziffer des Tones aus dem Verlauf der hydraodynamishen Spannungsercheinungen. Sitzungsber
40. Internal structure and permeability of major strike-slip fault zones: the Median Tectonic Line in Mie Prefecture, Southwest Japan10.1016/S0191-8141(02)00014-7 ↗