journal article·2021-05

Polyacrylamide hydrogels. III. Lap shear and peel

Yecheng Wang, Tenghao Yin, Zhigang Suo

Publisher page

Abstract

Abstract Lap shear and peel are common tests for soft materials. Their results, however, are rarely compared. Here we compare lap shear and peel as tests for measuring toughness. We prepare specimens for both tests by using stiff layers to sandwich a layer of a polyacrylamide hydrogel. We introduce a cut in the hydrogel by scissors, pull one stiff layer at constant velocity, and record the force. In lap shear, the force peaks and then drops to zero, the cut grows unstably through the entire hydrogel, and the peak force is used to determine toughness. In peel, the force peaks and then drops to a plateau, the cut grows in the hydrogel in steady state, and the plateau force is used to determine toughness. Our experimental data show that the average values of toughness determined by lap shear and peel are comparable. The peak forces in both tests scatter significantly, but the plateau force in peel scatters narrowly. Consequently, toughness determined by lap shear scatters more than toughness determined by peel. We hypothesize that the peak forces scatter mainly due to the statistical variation of the cuts made by scissors, and test the hypothesis using two additional sets of experiments. First, after a cut is made by scissors, we pre-peel the specimen to extend the cut somewhat, and then measure toughness by lap shear and peel. The peak force in lap shear scatters less, and the peak force in peel is removed. Second, we prepare cuts using spacers of various thicknesses, and find that the peak forces in both lap shear and peel vary with the thickness of the spacer. These findings clarify the use of lap shear and peel to characterize soft materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications · Material Properties and Applications · Advanced Theoretical and Applied Studies in Material Sciences and Geometry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Fracture mechanics of adhesive bonds10.5254/1.3540427 ↗
2. Peel mechanics of adhesive joints10.1002/pen.760170708 ↗
3. Effect of peel angle upon peel force10.1080/00218468708075425 ↗
4. Low-interfacial toughness materials for effective large-scale deicing10.1126/science.aav1266 ↗
5. Mixed mode cracking in layered materials10.1016/S0065-2156(08)70164-9 ↗
6. Review on adhesive joints and their application in hybrid composite structures10.1080/01694243.2018.1543528 ↗
7. Crack propagation in lap shear joints10.1088/0022-3727/8/5/010 ↗
8. Cracking of short lap joints10.1080/00218467508075045 ↗
9. Polyacrylamide hydrogels. II. elastic dissipater10.1016/j.jmps.2019.103737 ↗
10. Crack tip fields in soft elastic solids subjected to large quasi-static deformation — a review10.1016/j.eml.2015.06.002 ↗
11. Rupture of rubber. I. Characteristic energy for tearing10.1002/pol.1953.120100303 ↗
12. The equilibrium field near the tip of a crack for finite plane strain of incompressible elastic materials10.1007/BF00043706 ↗
13. Rupture of rubber. II. The strain concentration at an incision10.1002/pol.1955.120188802 ↗
14. Elastic fracture mechanics of the peel-test geometry10.1080/00218469208030454 ↗
15. Mechanical strength and rheological properties of tissue adhesives with regard to colorectal anastomosis: an ex vivo study10.1097/SLA.0000000000000599 ↗
16. Strength and toughness of adhesion of soft materials measured in lap shear10.1016/j.jmps.2020.103988 ↗
17. Lap shear of a soft and elastic adhesive
18. Polyacrylamide hydrogels. I. Network imperfection10.1016/j.jmps.2019.06.018 ↗
19. Dry double-sided tape for adhesion of wet tissues and devices10.1038/s41586-019-1710-5 ↗