A wrinkling-assisted strategy for controlled interface delamination in mechanically-guided 3D assembly
Source abstract
Abstract
Mechanically-guided three-dimensional (3D) assembly is a recently established method for the fabrication of 3D structures and devices at micro/nanoscale. Such assembly methods typically involve a process of compressive buckling in a patterned high-modulus thin film integrated with a low-modulus elastomer substrate at selective regions. A successful assembly requires, simultaneously, a sufficiently strong interface in selective regions to stay undelaminated, and a sufficiently weak interface in remaining regions to be fully separated. However, such requirements are very challenging to meet for highly flexible 3D mesostructures or those with large-area suspended features. Here, we propose a wrinkling-assisted strategy to substantially facilitate the delamination at desired regions of the film/substrate system. An additional assisting layer is introduced such that a weaker film/assisting-layer interface replaces the original film/substrate interface, and the wrinkles formed in the assisting layer induce additional driving forces to separate the film/assisting-layer interface. An analytical model is developed to capture the delamination of the thin film from the wrinkled assisting layer, which is validated by both experiments and finite element analyses (FEA). The model shows that a combined material/geometry parameter governs the process of delamination in the bilayer film/substrate system, offering a useful design reference for the mechanically-guided 3D assembly. Furthermore, our experiments and FEA demonstrate that the wrinkling-assisted strategy can enable the assembly of highly flexible 3D mesostructures and those with large areas attached to the substrate in the initial configuration, which are particularly challenging to achieve by using previous strategies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Materials and Mechanics · Advanced Sensor and Energy Harvesting Materials · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (77)
Show source-provided references
1. On the interface debond at the edge of a thin film on a thick substrate10.1016/S1359-6454(01)00421-9 ↗
2. Stability of straight delamination blisters10.1103/PhysRevLett.83.4124 ↗
3. Mode-dependent toughness and the delamination of compressed thin films10.1016/S0022-5096(00)00007-7 ↗
4. How soft substrates affect the buckling delamination of thin films through crack front sink-in10.1063/1.4979614 ↗
5. Interface adhesion between 2D materials and elastomers measured by buckle delaminations10.1002/admi.201500176 ↗
6. Wrinkling instabilities in soft bilayered systems
7. Helical coil buckling mechanism for a stiff nanowire on an elastomeric substrate10.1016/j.jmps.2016.05.020 ↗
8. Micro/Nanoscale 3D assembly by rolling, folding, curving, and buckling approaches
9. The role of van der Waals forces in adhesion of micromachined surfaces10.1038/nmat1431 ↗
10. Ruga mechanics of creasing: from instantaneous to setback creases
11. Evolution of the Laser-Induced Spallation Technique in Film Adhesion Measurement10.1115/1.4050700 ↗
12. A double perturbation method of postbuckling analysis in 2D curved beams for assembly of 3D ribbon-shaped structures10.1016/j.jmps.2017.10.012 ↗
13. Inverse design strategies for 3D surfaces formed by mechanically guided assembly
14. Homogenization of composites with extended general interfaces: comprehensive review and unified modeling10.1115/1.4051481 ↗
15. Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics10.1038/s41563-017-0011-3 ↗
16. Mechanics of hierarchical adhesion structures of geckos10.1016/j.mechmat.2004.03.008 ↗
17. Microfabricated adhesive mimicking gecko foot-hair10.1038/nmat917 ↗
18. Three-dimensional piezoelectric polymer microsystems for vibrational energy harvesting, robotic interfaces and biomedical implants10.1038/s41928-018-0189-7 ↗
19. Instabilities of soft films on compliant substrates10.1016/j.jmps.2016.09.012 ↗
20. Nonlinear analyses of wrinkles in a film bonded to a compliant substrate10.1016/j.jmps.2005.03.007 ↗
21. Finite deformation mechanics in buckled thin films on compliant supports10.1073/pnas.0702927104 ↗
22. Post-buckling analysis for the precisely controlled buckling of thin film encapsulated by elastomeric substrates10.1016/j.ijsolstr.2007.11.007 ↗
23. Interfacial sliding and buckling of monolayer graphene on a stretchable substrate10.1002/adfm.201301999 ↗
24. A stretchable form of single-crystal silicon for high-performance electronics on rubber Substrates10.1126/science.1121401 ↗
25. Three-dimensional electronic microfliers inspired by wind-dispersed seeds10.1038/s41586-021-03847-y ↗
26. Biologically inspired polymer microfibers with spatulate tips as repeatable fibrillar adhesives10.1063/1.2424442 ↗
27. Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing10.1073/pnas.1005828107 ↗
28. Lubricated wrinkles: imposed constraints affect the dynamics of wrinkle coarsening
29. A reversible wet/dry adhesive inspired by mussels and geckos10.1038/nature05968 ↗
30. Mechanics of buckled serpentine structures formed via mechanics-guided, deterministic three-dimensional assembly10.1016/j.jmps.2019.01.019 ↗
31. An analytical study on the morphology of buckle-delamination under large compression and boundary undulation10.1016/j.ijsolstr.2020.03.008 ↗
32. Mechanics of unusual soft network materials with rotatable structural nodes10.1016/j.jmps.2020.104210 ↗
33. Evaporation-driven crumpling and assembling of two-dimensional (2D) materials: a rotational spring – mechanical slider model10.1016/j.jmps.2019.103722 ↗
34. Performance and manufacturing of silicon-based vapor chambers10.1115/1.4049801 ↗
35. Harnessing the interface mechanics of hard films and soft substrates for 3D assembly by controlled buckling10.1073/pnas.1907732116 ↗
36. Design and fabrication of heterogeneous, deformable substrates for the mechanically guided 3D assembly10.1021/acsami.8b19187 ↗
37. Mechanics of bistable cross-shaped structures through loading-path controlled 3D assembly10.1016/j.jmps.2019.05.007 ↗
38. Gecko-inspired slant hierarchical microstructure-based ultrasensitive iontronic pressure sensor for intelligent interaction10.34133/2022/9852138 ↗
39. A nonlinear mechanics model of bio-inspired hierarchical lattice materials consisting of horseshoe microstructures10.1016/j.jmps.2016.02.012 ↗
40. Concomitant wrinkling and buckle-delamination of elastic thin films on compliant substrates10.1016/j.mechmat.2011.08.003 ↗
41. Gecko-inspired controllable adhesive structures applied to micromanipulation10.1002/adfm.201101783 ↗
42. Fiber- and particle-reinforced composite materials with the gurtin–murdoch and steigmann–ogden surface energy endowed interfaces10.1115/1.4051880 ↗
43. Enhanced adhesion by gecko-inspired hierarchical fibrillar adhesives10.1021/am8002439 ↗
44. Soft three-dimensional microscale vibratory platforms for characterization of nano-thin polymer films10.1021/acsnano.8b06736 ↗
45. On the growth of buckle-delamination pattern in compressed anisotropic thin films10.1016/j.actamat.2014.01.041 ↗
46. The shape of telephone cord blisters10.1038/ncomms14138 ↗
47. Three-dimensional multiscale, multistable, and geometrically diverse microstructures with tunable vibrational dynamics assembled by compressive buckling10.1002/adfm.201605914 ↗
48. Electro-mechanically controlled assembly of reconfigurable 3D mesostructures and electronic devices based on dielectric elastomer platforms10.1093/nsr/nwz164 ↗
49. Pattern transfer of large-scale thin membranes with controllable self-delamination interface for integrated functional systems10.1038/s41467-021-27208-5 ↗
50. Interfacial shear stress transfer at nanowire-polymer interfaces with van der Waals interactions and chemical bonding10.1016/j.jmps.2019.03.013 ↗
51. Thermally assisted peeling of an elastic strip in adhesion with a substrate via molecular bonds10.1016/j.jmps.2017.01.007 ↗
52. Active-sensing epidermal stretchable bioelectronic patch for noninvasive, conformal, and wireless tendon monitoring10.34133/2021/9783432 ↗
53. Highly-integrated, miniaturized, stretchable electronic systems based on stacked multilayer network materials10.1126/sciadv.abm3785 ↗
54. An analytical study of two-dimensional buckling of thin films on compliant substrates10.1063/1.2828050 ↗
55. The macroscopic delamination of thin films from elastic substrates10.1073/pnas.0902160106 ↗
56. The ‘Sticky Elastica’: delamination blisters beyond small deformations10.1039/C2SM26916C ↗
57. Vibration of mechanically-assembled 3D microstructures formed by compressive buckling10.1016/j.jmps.2017.12.002 ↗
58. Instabilities in thin films on hyperelastic substrates by 3D finite elements10.1016/j.ijsolstr.2015.06.007 ↗
59. Controlled 3D buckling of silicon nanowires for stretchable electronics10.1021/nn103189z ↗
60. A multi-scale modeling framework for instabilities of film/substrate systems10.1016/j.jmps.2015.10.003 ↗
61. Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling10.1126/science.1260960 ↗
62. Soft microfluidic assemblies of sensors, circuits, and radios for the skin10.1126/science.1250169 ↗
63. A theoretical model of reversible adhesion in shape memory surface relief structures and its application in transfer printing10.1016/j.jmps.2015.01.001 ↗
64. Assembly of complex 3D structures and electronics on curved surfaces10.1126/sciadv.abm6922 ↗
65. Soft three-dimensional network materials with rational bio-mimetic designs10.1038/s41467-020-14996-5 ↗
66. Mechanical assembly of complex, 3D mesostructures from releasable multilayers of advanced materials10.1126/sciadv.1601014 ↗
67. Elastomer surfaces with directionally dependent adhesion strength and their use in transfer printing with continuous roll-to-roll applications10.1002/adma.201104975 ↗
68. A theoretical model of postbuckling in straight ribbons with engineered thickness distributions for three-dimensional assembly10.1016/j.ijsolstr.2018.05.030 ↗
69. Spontaneous buckling-driven periodic delamination of thin films on soft substrates under large compression10.1016/j.jmps.2018.05.009 ↗
70. Electro-chemo-mechanics theory in transfer printing of thin films in electrolyte solutions
71. A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes10.1073/pnas.1515602112 ↗
72. Capillary transfer of soft films10.1073/pnas.2000340117 ↗
73. Printing, folding and assembly methods for forming 3D mesostructures in advanced materials10.1038/natrevmats.2017.19 ↗
74. Postbuckling analysis of ultra-Low rigidity serpentine structures10.1115/1.4053397 ↗
75. Theoretical modeling of tunable vibrations of three-dimensional serpentine structures for simultaneous measurement of adherent cell mass and modulus10.1557/s43577-021-00043-1 ↗
76. Torsional deformation dominated buckling of serpentine structures to form three-dimensional architectures with ultra-low rigidity10.1016/j.jmps.2021.104568 ↗
77. Multimodal surface instabilities in curved film–substrate structures10.1115/1.4036940 ↗