journal article·2020-10Open access

High fracture toughness micro-architectured materials

Y. Liu, L. St-Pierre, N.A. Fleck, V.S. Deshpande, A. Srivastava

Abstract

© 2020 We investigate the possibility of achieving high fracture toughness and high strength by the design of lightweight (density below water) metallic micro-architectured materials. The micro-architectured materials were manufactured by drilling a hexagonal array of holes in plates of an aluminum alloy, and the fracture toughness was evaluated via three-point bend tests of single-edge notch specimens. The results show that the fracture toughness of micro-architectured materials increases with increasing relative density and remarkably, a micro-architectured material can be 50% lighter than the parent material but maintain the same fracture toughness. Additional tests on geometrically similar specimens revealed that the fracture toughness increases linearly with the square-root of the cell size. The experiments are complemented by finite element calculations of ductile fracture. In the calculations, the fracture toughness of single-edge notch specimens subjected to three-point bending are evaluated using both, a procedure similar to the experiments and direct computation of the J-contour integral. The fracture toughness as calculated by both methods are consistent with the experimental results. In addition, the calculations are also carried out for single-edge notch specimens subjected to tensile loading, confirming the validity of the measured fracture toughness as a useful material property independent of specimen geometry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Anderson · 2017
2. Materials selection in mechanical design
3. Hybrid materials to expand the boundaries of material-property space10.1111/j.1551-2916.2011.04559.x ↗
4. ASTM:E1820-11 · 2011
5. Ductile rupture blunt-notch fracture criterion
6. Efficient large scale non-linear transient analysis by finite elements10.1002/nme.1620100308 ↗
7. On the path-dependence of the j-integral near a stationary crack in an elastic-plastic material10.1115/1.4001748 ↗
8. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
9. Mechanical response of ti–6al–4v octet-truss lattice structures10.1016/j.ijsolstr.2015.02.020 ↗
10. Cell model for nonlinear fracture analysis–i. micromechanics calibration10.1023/A:1007421420901 ↗
11. Micro-architectured materials: past, present and future10.1098/rspa.2010.0215 ↗
12. The damage tolerance of elastic–brittle, two-dimensional isotropic lattices10.1016/j.jmps.2006.08.004 ↗
13. Analysis and design of dual-phase steel microstructure for enhanced ductile fracture resistance10.1007/s10704-017-0235-x ↗
14. Gibson · 1999
15. Ultra-strong architected cu meso-lattices10.1016/j.eml.2015.01.006 ↗
16. Application of the GTN model in ductile fracture prediction of 7075-t651 aluminum alloy
17. Fracture toughness of brittle foams10.1016/0956-7151(91)90250-5 ↗
18. Fracture toughness of brittle honeycombs10.1016/0956-7151(91)90249-Z ↗
19. The stiffness and strength of the gyroid lattice10.1016/j.ijsolstr.2014.06.024 ↗
20. The indentation response of nickel nano double gyroid lattices10.1016/j.eml.2016.08.006 ↗
21. A comparison of methods for calculating energy release rates10.1016/0013-7944(85)90029-3 ↗
22. Ductile fracture of dual-phase steel sheets under bending10.1016/j.ijplas.2019.08.019 ↗
23. On the micromechanism of inclusion driven ductile fracture and its implications on fracture toughness10.1016/j.jmps.2019.05.010 ↗
24. Fracture toughness of brittle cellular solids10.1016/0036-9748(84)90510-6 ↗
25. Toughness of aluminium alloy foams10.1016/S1359-6454(99)00125-1 ↗
26. Deformation and fracture of aluminium foams10.1016/S0921-5093(00)00954-0 ↗
27. The fracture toughness of octet-truss lattices10.1016/j.jmps.2016.09.009 ↗
28. Localization of deformation in rate sensitive porous plastic solids10.1007/BF00942345 ↗
29. A tangent modulus method for rate dependent solids10.1016/0045-7949(84)90033-6 ↗
30. The fracture toughness of a cordierite square lattice10.1016/j.actamat.2009.08.069 ↗
31. A path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
32. The fracture toughness of planar lattices: imperfection sensitivity10.1016/j.jmps.2007.04.010 ↗
33. Ductile fracture of two-dimensional cellular structures – dedicated to prof. dr.-ing. d. gross on the occasion of his 60th birthday10.1023/A:1012248030212 ↗
34. Effect of inclusion density on ductile fracture toughness and roughness10.1016/j.jmps.2013.10.003 ↗
35. An assessment of the J-integral test for a metallic foam10.1016/j.jmps.2020.103958 ↗
36. Influence of voids on shear band instabilities under plane strain conditions10.1007/BF00036191 ↗
37. Influence of void nucleation on ductile shear fracture at a free surface10.1016/0022-5096(82)90025-4 ↗
38. On localization in ductile materials containing spherical voids10.1007/BF00015686 ↗
39. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
40. The effect of the notch root radius on the J-integral fracture toughness under modes i, ii and iii loadings10.1016/0013-7944(87)90023-3 ↗
41. Advances in fracture toughness test methods for ductile materials in low-constraint conditions10.1016/j.proeng.2015.12.195 ↗
42. Gurson, A. L., 1975. Plastic flow and fracture behavior of ductile materials incorporating void nucleation, growth and interaction. PhD Dissertation, Brown University, Providence, RI.