Microscale modelling of the deformation of a martensitic steel using the Voronoi tessellation method
Source abstract
Abstract
The deformation of a martensitic steel (P91) at the microscale is investigated using the finite element method. The approach takes into account the hierarchical grain-packet-block microstructure of the steel as determined experimentally by electron backscatter diffraction (EBSD). The orientation relationship for P91 between the prior austenite grain (PAG) and the martensitic packet/block is determined and found to be consistent with the Kurdjumow-Sachs (K-S) relationship. This relationship is incorporated within a finite-element model to represent the material microstructure, using a representative volume element (RVE) generated by a modified centroidal Voronoi tesselation (VT) approach. A non-linear, rate dependent, finite strain crystal plasticity model is used to simulate the mechanical response of the material at the micro- and macro-level and the sensitivity of the results to the model assumptions is investigated. It is found that the global (macro) mechanical response predicted by the RVE generated using the modified VT model is in good agreement with that predicted by an RVE taken directly from the measured EBSD microstructure. The influence of block/packet/grain boundaries on the local (micro) deformation is examined and it is found that the microscale prediction obtained using the RVE based on the modified VT microstructure, with an appropriate choice of microstructural parameters, is consistent with that obtained using the measured EBSD map.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Progress in creep-resistant steels for high efficiency coal-fired power plants10.1115/1.4032372 ↗
2. The role of microstructural instability on creep behavior of a martensitic 9Cr–2W steel10.1007/BF02801164 ↗
3. ASTM, Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service (ASTM A335/A335M), Technical Report, 2015. URL: https://www.astm.org/Standards/A335.htm.
4. Texture analysis with MTEX–free and open source software toolbox
5. The nature of martensite
6. Plastic flow of martensitic model alloys10.1016/j.msea.2004.02.074 ↗
7. Gradient-dependent deformation of two-phase single crystals10.1016/S0022-5096(00)00006-5 ↗
8. A dislocation mechanics-based crystallographic model of a B2-type intermetallic alloy10.1016/S0749-6419(95)00041-0 ↗
9. Microscale-calibrated modeling of the deformation response of dual-phase steels10.1016/j.actamat.2013.11.036 ↗
10. Centroidal voronoi tessellations: applications and algorithms10.1137/S0036144599352836 ↗
11. Experimental and computational studies of low cycle fatigue crack nucleation in a polycrystal10.1016/j.ijplas.2006.07.001 ↗
12. Dunne, F. P. E., Kiwanuka, R., Wilkinson, A. J., 2012. Crystal plasticity analysis of micro-deformation, lattice rotation and geometrically necessary dislocation density. in: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. doi:10.1098/rspa.2012.0050.10.1098/rspa.2012.0050 ↗
13. Engler · 2010
14. Recent Advances in Creep Resistant Steels for Power Plant Applications10.1007/BF02706455 ↗
15. Lifetime prediction of 9–12% Cr martensitic steels subjected to creep-fatigue at high temperature10.1016/j.ijfatigue.2009.10.017 ↗
16. Microscale-calibrated modeling of the deformation response of low-carbon martensite10.1016/j.actamat.2013.02.051 ↗
17. Golden · 2016
18. Microstructural modeling of P91 martensitic steel under uniaxial loading conditions10.1115/1.4026028 ↗
19. Crystallography of austenite decomposition
20. The mechanism of martensite formation
21. Creep strength and ductility of 9 to 12% chromium steels10.1179/mht.2004.006 ↗
22. Microstructure and long-term creep properties of 9–12% Cr steels10.1016/j.ijpvp.2007.06.010 ↗
23. Dislocation density crystalline plasticity modeling of lath martensitic microstructures in steel alloys10.1080/14786430903185999 ↗
24. Dynamic shear–strain localization and inclusion effects in lath martensitic steels subjected to high pressure loads10.1016/j.jmps.2010.04.009 ↗
25. Computation of parent austenite grain orientation from product grain orientations upon displacive phase transformations10.1088/0965-0393/21/8/085009 ↗
26. The effect of matrix non-linearity on the properties of unidirectional composite materials for multi-scale analysis
27. Crystallographic analysis of plate martensite in Fe-28.5 at.% Ni by FE-SEM/EBSD10.1016/j.matchar.2004.12.015 ↗
28. Crystallographic features of lath martensite in low-carbon steel10.1016/j.actamat.2005.11.001 ↗
29. Surface martensite in iron–nickel10.1016/0001-6160(64)90004-5 ↗
30. Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models10.1016/j.cma.2014.05.003 ↗
31. Krauss · 2005
32. Über den mechanismus der stahlhärtung10.1007/BF01397346 ↗
33. The effect of prior deformation on subsequent microplasticity and damage evolution in an austenitic stainless steel at elevated temperature10.1016/j.actamat.2013.02.038 ↗
34. Multiscale modelling of mechanical response in a martensitic steel: a micromechanical and length-scale-dependent framework for precipitate hardening10.1016/j.actamat.2014.08.012 ↗
35. On the evolution of lattice deformation in austenitic stainless steels – the role of work hardening at finite strains10.1016/j.jmps.2011.09.008 ↗
36. Microscale prediction of deformation in an austenitic stainless steel under uniaxial loading10.1016/j.euromechsol.2011.02.002 ↗
37. Ductile fracture: experiments and computations10.1016/j.ijplas.2010.04.001 ↗
38. Microstructural characterization of P91 steel in the virgin, service exposed and post-service re-normalized conditions10.1002/srin.201300055 ↗
39. Microstructure and mechanical behaviour of ferrous martensite
40. Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains10.1016/S0749-6419(00)00064-4 ↗
41. The morphology and crystallography of lath martensite in Fe–C alloys10.1016/S1359-6454(02)00577-3 ↗
42. Effect of block size on the strength of lath martensite in low carbon steels10.1016/j.msea.2005.12.048 ↗
43. X-ray investigation of the mechanism of the transformation from face centered cubic lattice to body centered cubic
44. Okabe · 2009 · 501
45. On estimation of a probability density function and mode10.1214/aoms/1177704472 ↗
46. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
47. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
48. Der orientierungszusammenhang zwischen zementit und austenit10.1016/0001-6160(62)90108-6 ↗
49. Characterization and correlation of mechanical, microstructural and ultrasonic properties of power plant steel10.1016/j.matchar.2014.11.034 ↗
50. Inelastic constitutive relations for solids: an internal-variable theory and its application to metal plasticity10.1016/0022-5096(71)90010-X ↗
51. Martensite formation in 9Cr–1Mo steel weld metal and its effect on creep behavior
52. A study on the formation mechanisms of butterfly-type martensite in Fe-30% ni alloy using EBSD-based orientation microscopy10.1016/j.actamat.2008.12.035 ↗
53. Statistically representative three-dimensional microstructures based on orthogonal observation sections10.1007/s11661-004-0146-0 ↗
54. Low cycle fatigue behavior and microstructural evolution of modified 9Cr–1Mo ferritic steel10.1016/j.msea.2006.07.146 ↗
55. Microstructurally induced fracture nucleation and propagation in martensitic steels10.1016/j.jmps.2012.11.006 ↗
56. Revisiting the structure of martensite in iron–carbon steels10.2320/matertrans.MRA2007338 ↗
57. Some aspects of plant and research experience in the use of new high strength martensitic steel P9110.1016/j.ijpvp.2006.11.002 ↗
58. Martensite laths in creep resistant martensitic 9–12Cr steels–calculation and measurement of misorientations10.1016/j.matchar.2006.08.014 ↗
59. Sun, F., O′Dowd, N. P., 2018. Microscale Modelling of the Effect of Packet and Block Boundaries on the Damage of Martensitic Steel. in progress.
60. The effect of structure on the deformation of as-quenched and tempered martensite in an Fe-0.2 pct C alloy10.1007/BF02644037 ↗
61. Evaluation of the crystallographic orientation relationships between FCC and BCC phases in trip steels10.2355/isijinternational.49.1601 ↗
62. Über den Mechanismus der α-γ Umwandlung des Eisens
63. Crystal plasticity and high-resolution electron backscatter diffraction analysis of full-field polycrystal Ni superalloy strains and rotations under thermal loading10.1016/j.actamat.2014.07.036 ↗
64. Martensite morphology and habit plane transitions during tensile tests for Fe–Ni–C alloys10.1016/0001-6160(89)90231-9 ↗
65. A coupled kinetic-constitutive approach to the study of high temperature crack initiation in single crystal nickel-base superalloys10.1016/j.jmps.2005.09.001 ↗