Cohesive-zone effects in hydraulic fracture propagation
Source abstract
Abstract
Abstract Hydraulic fracture presents an interesting case of crack elasticity and fracture propagation non-linearly coupled to fluid flow. Hydraulic fracture (HF) is often modeled using the Linear Elastic Fracture Mechanics (LEFM), which assumes that the damaged zone associated with the rock breakage near the advancing fracture front is small compared to the lengthscales of other physical processes acting during propagation. The latter include dissipation in viscous fluid flow in the fracture channel, of which the fluid lag - a region adjacent to the fracture tip filled with fracturing fluid volatiles and/or infiltrated formation pore fluid - is the extreme manifestation. In this study we address the validity of the LEFM approach to hydraulic fracturing by constructing the solution for the near tip region of a cohesive fracture driven by Newtonian fluid in an impermeable linear-elastic rock. We show that the near HF tip solution has an intricate structure supported by a number of nested lengthscales on which different dissipation processes are realized. This structure is bookended by the solid ‘c’ or fluid lag ‘o’ process zone immediately near the tip and by the viscosity ‘m’ asymptote away from the tip, while the LEFM ‘k’ asymptote may emerge at intermediate distances within the c/o to m transition. Realization of the k asymptote, and, therefore, the viability of the LEFM in HF, depends on two parameters: the cohesive-to-fluid-lag fracture energy ratio Gc/Go and the cohesive-to-in-situ stress ratio σc/σo. For representative values of the former, we show that the LEFM-behavior emerges only when the cohesive stress is large compared to the in situ confining. Since σc ∼ few MPa for most rocks, it follows that the LEFM may only be applicable to laboratory hydraulic fracture conducted under low confining stress, and, conversely, is not applicable to the field hydraulic fracturing characterized by larger values of σo. We further use an approximate “equation of motion” approach based on the continuation of the tip solution onto the entire fracture to solve for the propagation of a penny-shaped HF driven by a point source fluid injection and quantify the prominence of the non-LEFM effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydraulic Fracturing and Reservoir Analysis · Drilling and Well Engineering · Seismic Imaging and Inversion Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. The mathematical theory of equilibrium cracks in brittle fracture10.1016/S0065-2156(08)70121-2 ↗
2. Early-time solution for a radial hydraulic fracture
3. Experimental validation of the tip asymptotics for a fluid-driven crack10.1016/j.jmps.2008.08.006 ↗
4. Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model10.1016/j.engfracmech.2011.11.012 ↗
5. The crack tip region in hydraulic fracturing
6. Mechanics of hydraulic fractures
7. The tip region of a fluid-driven fracture in a permeable elastic solid10.1017/S0022112003005275 ↗
8. An approximate solution for a penny-shaped hydraulic fracture that accounts for fracture toughness, fluid viscosity and leak-off
9. An approximate solution for a plane strain hydraulic fracture that accounts for fracture toughness, fluid viscosity, and leak-off10.1007/s10704-017-0192-4 ↗
10. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
11. Propagation of a plane-strain hydraulic fracture with a fluid lag: early-time solution10.1016/j.ijsolstr.2005.10.009 ↗
12. Roughness-dominated hydraulic fracture propagation
13. The tip region of a fluid-driven fracture in an elastic medium10.1115/1.321162 ↗
14. Multiscale tip asymptotics in hydraulic fracture with leak-off10.1017/S002211201000501X ↗
15. Influence of microstructure on fracture propagation in rock10.1007/BF01240160 ↗
16. Cohesive force across the tip of a longitudinal-shear crack and Griffith’s specific surface energy10.1029/JB077i020p03796 ↗
17. The near-tip region of a hydraulic fracture with pressure-dependent leak-off and leak-in
18. Kovalyshen · 2010
19. An implicit algorithm for the propagation of a hydraulic fracture with a fluid lag10.1016/j.cma.2007.06.011 ↗
20. Buoyancy-driven fluid fracture: the effects of material toughness and of low-viscosity precursors10.1017/S0022112090001288 ↗
21. Madyarova · 2004
22. Fluid mechanics of hydraulic fracturing: a review10.1016/j.petrol.2017.05.019 ↗
23. The growth of slip surfaces in the progressive failure of over-consolidated clay
24. Modeling multi-scale processes in hydraulic fracture propagation using the implicit level set algorithm10.1016/j.cma.2014.08.024 ↗
25. An implicit level set method for modeling hydraulically driven fractures10.1016/j.cma.2008.01.013 ↗
26. Mathematical analysis in the mechanics of fracture
27. Tensile fracture of rock at high confining pressure: implications for dike propagation10.1029/93JB01391 ↗
28. The influence of the cohesive process zone in hydraulic fracturing modelling10.1007/s10704-010-9515-4 ↗
29. Modeling of hydraulic fracturing in a poroelastic cohesive formation10.1061/(ASCE)GM.1943-5622.0000121 ↗
30. Propagation of a fluid-driven penny-shaped fracture in an impermeable rock: asymptotic solutions10.1016/S0020-7683(02)00492-4 ↗
31. Numerical methods for coupled fracture problems10.1016/j.jmps.2018.01.008 ↗
32. Pore pressure cohesive zone modeling of hydraulic fracture in quasi-brittle rocks10.1016/j.mechmat.2014.12.010 ↗
33. Explicit versus implicit front advancing schemes for the simulation of hydraulic fracture growth10.1002/nag.2898 ↗