A parameter-free mechanistic model of the adhesive wear process of rough surfaces in sliding contact
Source abstract
Abstract
In order to develop predictive wear laws, relevant material parameters and their influence on the wear rate need to be identified. Despite decades of research, there is no agreement on the mathematical form of wear equations and even the simplest models, such as Archard’s, contain unpredictable fit parameters. Here, we propose a simple model for adhesive wear in dry sliding conditions that contains no fit parameters and is only based on material properties and surface parameters. The model connects elastoplastic contact solutions with the insight that volume detachment from sliding surfaces occurs in the form of wear particles, the minimum size of which can be estimated. A novelty of the model is the explicit tracking of the sliding process, which allows us to meaningfully connect particle emission rates and sizes to the macroscopic wear rate. The results are qualitatively promising, but we identify the necessity for more controlled wear experiments and the parameters needed from such work in order to fully verify and improve our model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Wear map of ceramics10.1016/S0043-1648(96)07363-2 ↗
2. Effect of adhesion on material removal during adhesive wear
3. Asperity-level origins of transition from mild to severe wear10.1103/PhysRevLett.120.186105 ↗
4. Critical length scale controls adhesive wear mechanisms
5. On the debris-level origins of adhesive wear10.1073/pnas.1700904114 ↗
6. A stress-criterion-based model for the prediction of the size of wear particles in boundary lubricated contacts10.1007/s11249-016-0772-x ↗
7. On the dry elasto-plastic contact of nominally flat surfaces10.1016/j.triboint.2005.11.008 ↗
8. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
9. The wear of metals under unlubricated conditions
10. The area of contact between stationary and between moving surfaces
11. Adhesive wear mechanisms in the presence of weak interfaces: Insights from an amorphous model system
12. On the empirical law of adhesive wear10.1063/1.1701970 ↗
13. The elastic contact of a rough surface10.1016/0043-1648(75)90145-3 ↗
14. The minimum scale of grooving on faults10.1130/G37934.1 ↗
15. Linear elastic contact of the Weierstrass profile10.1098/rspa.2000.0522 ↗
16. Discussion of “Measuring and understanding contact area at the nanoscale: A review”
17. Jacobs · Appl. Mech. Rev. · 2017 · 69
18. Evolution of slip surface roughness through shear
19. Direct observation of frictional contacts: New insights for state-dependent properties10.1007/BF00874332 ↗
20. A mechanistic understanding of the wear coefficient: From single to multiple asperities contact10.1016/j.jmps.2018.02.015 ↗
21. Crack nucleation in the adhesive wear of an elastic–plastic half-space10.1016/j.jmps.2020.104100 ↗
22. Frérot · 2019
23. Tamaas: a library for elastic–plastic contact of periodic rough surfaces
24. A Fourier-accelerated volume integral method for elastoplastic contact10.1016/j.cma.2019.04.006 ↗
25. Quantifying, locating, and following asperity-scale wear processes within multiasperity contacts10.1007/s11249-019-1203-6 ↗
26. VI. The phenomena of rupture and flow in solids10.1098/rsta.1921.0006 ↗
27. The emergence of small-scale self-affine surface roughness from deformation10.1126/sciadv.aax0847 ↗
28. Wear mode map of ceramics10.1016/0043-1648(91)90250-X ↗
29. Holm · 1967
30. Wear prediction of ceramics10.1016/j.wear.2003.11.002 ↗
31. Finite-element analysis of contact between elastic self-affine surfaces10.1103/PhysRevE.70.026117 ↗
32. Quantitative characterization of surface topography using spectral analysis10.1088/2051-672X/aa51f8 ↗
33. The contact of elastic regular wavy surfaces10.1016/0020-7403(85)90029-3 ↗
34. Tribology of ceramics10.1016/0043-1648(90)90075-L ↗
35. Wear mechanism of ceramic materials in dry rolling friction10.1115/1.3261255 ↗
36. Debris development in fretting contacts – debris particles and debris beds10.1016/j.triboint.2019.01.051 ↗
37. Fractal characterization and simulation of rough surfaces10.1016/0043-1648(90)90154-3 ↗
38. Wear models and predictive equations: their form and content10.1016/0043-1648(95)90158-2 ↗
39. Emergence of self-affine surfaces during adhesive wear10.1038/s41467-019-09127-8 ↗
40. Role of interfacial adhesion on minimum wear particle size and roughness evolution10.1103/PhysRevE.102.043001 ↗
41. Pei · 2006
42. Finite element modeling of elasto-plastic contact between rough surfaces10.1016/j.jmps.2005.06.008 ↗
43. Theory of rubber friction and contact mechanics10.1063/1.1388626 ↗
44. On the fractal dimension of rough surfaces10.1007/s11249-014-0313-4 ↗
45. On the nature of surface roughness with application to contact mechanics, sealing, rubber friction and adhesion
46. Adhesive wear and interaction of tangentially loaded micro-contacts10.1016/j.ijsolstr.2019.10.023 ↗
47. Adhesive wear and particle emission: Numerical approach based on asperity-free formulation of Rabinowicz criterion10.1007/s40544-018-0236-4 ↗
48. Transient wear of machine parts10.1016/0043-1648(65)90170-5 ↗
49. A quantitative study of the wear process10.1088/0370-1301/66/11/304 ↗
50. The effect of size on the looseness of wear fragments10.1016/0043-1648(58)90335-1 ↗
51. Rabinowicz · 1995
52. Metallic transfer between sliding metals: an autoradiographic study
53. Zur Theorie der Zapfenreibung
54. Tabor · 1951
55. Modeling and simulation in tribology across scales: An overview10.1016/j.triboint.2018.02.005 ↗
56. Wear and wear transition modeling of ceramics10.1016/0043-1648(95)06750-7 ↗
57. Molecular probes reveal deviations from Amontons’ law in multi-asperity frictional contacts10.1038/s41467-018-02981-y ↗
58. Simulation of rough surfaces with FFT10.1016/S0301-679X(00)00016-5 ↗
59. Transition between mild and severe wear in aluminium alloys10.1016/S1359-6454(96)00191-7 ↗
60. Sliding wear of ceramic-ceramic, ceramic-steel and steel-steel pairs in lubricated and unlubricated contact10.1016/0043-1648(89)90109-9 ↗
61. Micro- and macro-tribological properties of SiC ceramics in sliding contact10.1016/S0043-1648(01)00595-6 ↗