Fishnet statistics for probabilistic strength and scaling of nacreous imbricated lamellar materials
Source abstract
Abstract
Abstract Similar to nacre (or brick masonry), imbricated (or staggered) lamellar structures are widely found in nature and man-made materials, and are of interest for biomimetics. They can achieve high defect insensitivity and fracture toughness, as demonstrated in previous studies. But the probability distribution with a realistic far-left tail is apparently unknown. Here, strictly for statistical purposes, the microstructure of nacre is approximated by a diagonally pulled fishnet with quasibrittle links representing the shear bonds between parallel lamellae (or platelets). The probability distribution of fishnet strength is calculated as a sum of a rapidly convergent series of the failure probabilities after the rupture of one, two, three, etc., links. Each of them represents a combination of joint probabilities and of additive probabilities of disjoint events, modified near the zone of failed links by the stress redistributions caused by previously failed links. Based on previous nano- and multi-scale studies at Northwestern, the strength distribution of each link, characterizing the interlamellar shear bond, is assumed to be a Gauss-Weibull graft, but with a deeper Weibull tail than in Type 1 failure of non-imbricated quasibrittle materials. The autocorrelation length is considered equal to the link length. The size of the zone of failed links at maximum load increases with the coefficient of variation (CoV) of link strength, and also with fishnet size. With an increasing width-to-length aspect ratio, a rectangular fishnet gradually transits from the weakest-link chain to the fiber bundle, as the limit cases. The fishnet strength at failure probability 10 − 6 grows with the width-to-length ratio. For a square fishnet boundary, the strength at 10 − 6 failure probability is about 11% higher, while at fixed load the failure probability is about 25-times higher than it is for the non-imbricated case. This is a major safety advantage of the fishnet architecture over particulate or fiber reinforced materials. There is also a strong size effect, partly similar to that of Type 1 while the curves of log-strength versus log-size for different sizes could cross each other. The predicted behavior is verified by about a million Monte Carlo simulations for each of many fishnet geometries, sizes and CoVs of link strength. In addition to the weakest-link or fiber bundle, the fishnet becomes the third analytically tractable statistical model of structural strength, and has the former two as limit cases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Calcium Carbonate Crystallization and Inhibition · Bone Tissue Engineering Materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Statistical models of fracture10.1080/00018730300741518 ↗
2. Toughening mechanisms in bioinspired multilayered materials10.1098/rsif.2014.0855 ↗
3. Bažant · 2005
4. Nano-mechanics based modeling of lifetime distribution of quasibrittle structures10.1016/j.engfailanal.2009.04.019 ↗
5. Bažant · 2017
6. Scaling of strength and lifetime probability distributions of quasibrittle structures based on atomistic fracture mechanics10.1073/pnas.0904797106 ↗
7. Mechanics-based statistics of failure risk of quasibrittle structures and size effect on safety factors10.1073/pnas.0602684103 ↗
8. Activation energy based extreme value statistics and size effect in brittle and quasibrittle fracture10.1016/j.jmps.2006.05.007 ↗
9. Bažant · 1998
10. Statistical size effect in quasi-brittle structures: II. Nonlocal theory
11. Fracture strength: stress concentration, extreme value statistics, and the fate of the weibull distribution10.1103/PhysRevApplied.2.034008 ↗
12. The statistical theory of the strength of bundles of threads. I10.1098/rspa.1945.0011 ↗
13. Optimal overlap length in staggered architecture composites under dynamic loading conditions10.1016/j.jmps.2012.08.005 ↗
14. Crack tortuousity in the nacreous layer–Topological dependence and biomimetic design guideline10.1016/j.ijsolstr.2013.10.006 ↗
15. Limiting forms of the frequency distribution of the largest or smallest member of a sample10.1017/S0305004100015681 ↗
16. Materials become insensitive to flaws at nanoscale: lessons from nature10.1073/pnas.0631609100 ↗
17. Random lattice-particle simulation of statistical size effect in quasi-brittle structures failing at crack initiation
18. The chain-of-bundles probability model for the strength of fibrous materials I: analysis and conjectures10.1177/002199837801200207 ↗
19. The chain-of-bundles probability model for the strength of fibrous materials II: a numerical study of convergence10.1177/002199837801200308 ↗
20. Cohesive crack, size effect, crack band and work-of-fracture models compared to comprehensive concrete fracture tests10.1007/s10704-013-9926-0 ↗
21. Scaling of strength of metal-composite joints: II. Interface fracture analysis10.1115/1.3172152 ↗
22. Finite weakest-link model with zero threshold for strength distribution of dental restorative ceramics10.1016/j.dental.2008.11.011 ↗
23. Unified nano-mechanics based probabilistic theory of quasibrittle and brittle structures: II. Fatigue crack growth, lifetime and scaling10.1016/j.jmps.2011.03.007 ↗
24. Scaling of static fracture of quasi-brittle structures: strength, lifetime, and fracture kinetics10.1115/1.4005881 ↗
25. Subcritical crack growth law and its consequences for lifetime statistics and size effect of quasibrittle structures10.1088/0022-3727/42/21/214008 ↗
26. Unified nano-mechanics based probabilistic theory of quasibrittle and brittle structures: I. Strength, static crack growth, lifetime and scaling10.1016/j.jmps.2011.03.002 ↗
27. Luo, W., Bažant, Z. P., 2017. Fishnet statistics for strength scaling of nacreous imbricated lamellar materials. ArXiv preprint arXiv:1706.01591(June 4).10.1016/j.jmps.2017.07.023 ↗
28. Statistics of strength of ceramics: finite weakest-link model and necessity of zero threshold10.1007/s10704-009-9317-8 ↗
29. The asymptotic stochastic strength of bundles of elements exhibiting general stress? Strain laws10.1016/j.probengmech.2014.01.001 ↗
30. Statistical distribution and size effect of residual strength of quasibrittle materials after a period of constant load10.1016/j.jmps.2013.12.005 ↗
31. Discontinuous crack-bridging model for fracture toughness analysis of nacre10.1016/j.jmps.2012.04.011 ↗
32. Deformation mechanisms in nacre10.1557/JMR.2001.0340 ↗
33. Statistical shear lag model: unraveling the size effect in hierarchical composites10.1016/j.actbio.2015.01.040 ↗