journal article·2018-07

A thermo–chemo–mechanically coupled constitutive model for curing of glassy polymers

Trisha Sain, Kaspar Loeffel, Shawn Chester

Publisher page

Abstract

Abstract Curing of a polymer is the process through which a polymer liquid transitions into a solid polymer, capable of bearing mechanical loads. The curing process is a coupled thermo–chemo–mechanical conversion process which requires a thorough understanding of the system behavior to predict the cure dependent mechanical behavior of the solid polymer. In this paper, a thermodynamically consistent, frame indifferent, thermo–chemo–mechanically coupled continuum level constitutive framework is proposed for thermally cured glassy polymers. The constitutive framework considers the thermodynamics of chemical reactions, as well as the material behavior for a glassy polymer. A stress-free intermediate configuration is introduced within a finite deformation setting to capture the formation of the network in a stress-free configuration. This work considers a definition for the degree of cure based on the chemistry of the curing reactions. A simplified version of the proposed model has been numerically implemented, and simulations are used to understand the capabilities of the model and framework.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Polymer Nanocomposites and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Abaqus/Standard. Abaqus Reference Manuals. Dassault Systemes Simulia, Providence, RI, 2017.
2. Calculation of stresses in crosslinking polymers10.1177/002199839603000102 ↗
3. A thermodynamically consistent, nonlinear viscoelastic approach for modeling thermosets during cure10.1122/1.2360670 ↗
4. A thermo-mechanically coupled theory for large deformations of amorphous polymers. part ii: applications10.1016/j.ijplas.2008.11.005 ↗
5. A thermo-mechanically coupled theory for large deformations of amorphous polymers. part i: formulation10.1016/j.ijplas.2008.11.004 ↗
6. A theory of amorphous solids undergoing large deformations, with applications to polymeric glasses10.1016/S0020-7683(02)00651-0 ↗
7. Cure-induced residual strain build-up in a thermoset resin10.1016/j.compositesa.2005.05.016 ↗
8. Kinetics and thermodynamics of isothermal curing reaction of epoxy-4, 4-Diaminoazobenzene reinforced with nanosilica and nanoclay particles10.1002/pc.20930 ↗
9. A thermodynamic framework for the modeling of crystallizable shape memory polymers10.1016/j.ijengsci.2007.11.008 ↗
10. Constitutive modeling of the large strain time-dependent behavior of elastomers10.1016/S0022-5096(97)00075-6 ↗
11. Large inelastic deformation of glassy polymers. part 1: rate dependent constitutive model10.1016/0167-6636(88)90003-8 ↗
12. Constitutive model for the finite deformation stress-strain behavior of poly(ethylene terephthalate) above the glass transition10.1016/S0032-3861(99)00406-1 ↗
13. Analysing process-induced deformation and stresses using a simulated manufacturing process for composite multispar flaps10.1177/0021998313519281 ↗
14. Microlevel manufacturing process simulation of carbon fiber/epoxy composites to analyze the effect of chemical and thermal induced residual stresses10.1177/0021998311430157 ↗
15. Cure-dependent thermomechanical modelling of the stress relaxation behaviour of composite materials during manufacturing10.1177/0021998316656924 ↗
16. Analysis of process-induced deformations in thermoplastic composite materials10.1177/0021998313502101 ↗
17. Cure-dependent thermo-chemical modelling and analysis of the manufacturing process of an aircraft composite frame10.1177/0021998314527777 ↗
18. Glass-rubber constitutive model for amorphous polymers near the glass transition10.1016/0032-3861(95)99429-X ↗
19. A thermo-mechanically coupled theory for fluid permeation in elastomeric materials: application to thermally responsive gels10.1016/j.jmps.2011.07.005 ↗
20. Hot-drawing of poly(methyl methacrylate) and simulation using a glass-rubber constitutive model10.1016/S0032-3861(01)00799-6 ↗
21. Constitutive modeling of the finite strain behavior of amorphous polymers in and above the glass transition10.1016/j.mechmat.2006.02.006 ↗
22. The thermodynamics of irreversible processes. iv. the theory of elasticity and an elasticity10.1103/PhysRev.73.373 ↗
23. Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite parts10.1016/S1359-835X(01)00123-3 ↗
24. A new constitutive relation for rubber10.5254/1.3538357 ↗
25. Optimal temperature profiles for minimum residual stress in the cure process of polymer composites10.1016/S0263-8223(99)00080-X ↗
26. The influence of intrinsic strain softening on strain localization in polycarbonate: modeling and experimental validation10.1115/1.482784 ↗
27. Gurtin · 2010
28. Curing reaction of biphenyl epoxy resin with different phenolic functional hardeners10.1002/(SICI)1099-0518(19980415)36:5<773::AID-POLA10>3.0.CO;2-D ↗
29. The role of curing stresses in subsequent response, damage and failure of textile polymer composites10.1016/j.jmps.2012.12.005 ↗
30. A finite strain framework for the simulation of polymer curing. part i: elasticity10.1007/s00466-009-0397-0 ↗
31. A small-strain model to simulate the curing of thermosets10.1007/s00466-008-0344-5 ↗
32. A finite strain framework for the simulation of polymer curing. part ii. viscoelasticity and shrinkage10.1007/s00466-010-0479-z ↗
33. Kinetics and thermal characterization of thermoset cure10.1002/pen.760130110 ↗
34. A thermodynamical framework for chemically reacting systems10.1007/s00033-010-0104-1 ↗
35. Modelling the cure of a commercial epoxy resin for applications in resin transfer moulding10.1002/(SICI)1097-0126(199610)41:2<183::AID-PI621>3.0.CO;2-F ↗
36. Cure kinetic model, heat of reaction, and glass transition temperature of as4/3501-6 graphite–epoxy prepregs10.1177/0021998302036021712 ↗
37. Computational studies on high-stiffness, high-damping Sic–InSn particulate reinforced composites10.1016/S0020-7683(02)00404-3 ↗
38. Modeling of curing processes based on a multi-field potential. single- and multiscale aspects10.1016/j.ijsolstr.2012.04.034 ↗
39. Optimal curing for thermoset matrix composites: thermochemical considerations10.1002/pc.10524 ↗
40. On the phenomenological representation of curing phenomena in continuum mechanics
41. A chemo–thermo–mechanically coupled theory for elastic-viscoplastic deformation, diffusion, and volumetric swelling due to a chemical reaction10.1016/j.ijplas.2011.04.001 ↗
42. On modeling the oxidation of high-temperature alloys10.1016/j.actamat.2012.07.067 ↗
43. Photomechanics of light-activated polymers10.1016/j.jmps.2009.03.003 ↗
44. Thermodynamics and mechanics of photochemcially reacting polymers10.1016/j.jmps.2013.06.008 ↗
45. Clinical criteria for the successful curing of composite materials10.1016/S0718-5391(13)70140-X ↗
46. Thermodynamic consistent modeling of polymer curing coupled to visco-elasticity at large strains10.1016/j.ijsolstr.2013.01.033 ↗
47. Modelling and computation of curing and damage of thermosets10.1016/j.commatsci.2011.09.013 ↗
48. A thermodynamical framework for the thermo–chemo–mechanical couplings in soft materials at finite strain10.1016/j.mechmat.2016.01.008 ↗
49. Viscoelastic properties of an epoxy resin during cure10.1177/a037323 ↗
50. Mechanics of the inelastic behavior of materials–part 1, theoretical underpinnings10.1016/S0749-6419(98)00037-0 ↗
51. The kinetics of polyurethane structural foam formation: foaming and polymerization10.1002/aic.15680 ↗
52. A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures10.1016/j.polymer.2005.05.079 ↗
53. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress10.1016/j.ijsolstr.2005.06.040 ↗
54. Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates10.1016/j.ijsolstr.2007.05.018 ↗
55. Cure induced stresses and damage in particulate reinforced polymer matrix composites: a review of the scientific literature10.1016/j.dental.2004.11.001 ↗
56. A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition10.1016/j.ijplas.2010.01.004 ↗
57. Thermally actuated shape-memory polymers: experiments, theory, and numerical simulations10.1016/j.jmps.2010.04.004 ↗
58. Polymerization of thin film polymers
59. Evolution of material properties during free radical photopolymerization10.1016/j.jmps.2017.11.018 ↗