A physically-based model of cyclic responses for martensitic steels with the hierarchical lath structure under different loading modes
Source abstract
Abstract
Abstract Stress and strain controlled low cycle fatigue of the modified 9–12% Cr steel with the hierarchical arranged lath martensitic structure were conducted. We found that, apart from microstructure recovery in lath structure, an additional mechanism of reverse avalanche of low angle boundary, associated with the burst-like plastic deformation is responsible for the accelerated softening during stress cycling. These microstructural evolutions can be explicitly represented via deriving different dislocation evolution laws in terms of dislocation annihilation and storage events. Accordingly, a new model is proposed involving the microstructural evolution. Results indicate that the accelerated softening behavior under stress cycling can be reproduced very well by the present model with a very limited number of adjustable parameters. In addition, the model can capture the features of cyclic response and microstructural evolution under both the strain and stress cycling over a wide range of amplitudes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Fatigue behavior of rail steel-a comparison between strain and stress controlled loading10.1016/j.wear.2004.03.030 ↗
2. A dislocation-based model for high temperature cyclic viscoplasticity of 9–12Cr steels10.1016/j.commatsci.2014.05.034 ↗
3. A physically-based constitutive model for high temperature microstructural degradation under cyclic deformation10.1016/j.ijfatigue.2017.03.018 ↗
4. A study of the creep behavior of modified 9Cr–1Mo steel using continuum-damage modeling10.1016/j.ijplas.2012.04.004 ↗
5. Quantitative investigation of microstructural evolution of two melts of the martensitic rotor steel X12CrMoWVNbN10-1-1 during long-term creep
6. Dislocation mechanics of creep10.1016/j.msea.2008.04.110 ↗
7. Modeling of work hardening and stress saturation in FCC metals10.1016/S0079-6425(97)00032-7 ↗
8. Caillard · 2003
9. Discrete dislocation density modeling of single phase FCC polycrystal aggregates10.1016/j.actamat.2004.08.044 ↗
10. Effects of lattice misorientations on strain heterogeneities in FCC polycrystals10.1016/j.jmps.2005.11.003 ↗
11. A study of microstructural length scale effects on the behavior of FCC polycrystals using strain gradient concepts10.1016/j.ijplas.2004.11.001 ↗
12. Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale10.1126/science.1143719 ↗
13. On the nature of internal interfaces in tempered martensite ferritic steels10.3139/146.030511 ↗
14. Effects of cyclic deformation on subgrain evolution and creep in 9–12% Cr-steels10.1016/j.msea.2005.06.029 ↗
15. Effect of tempering on microstructure and mechanical properties of boron containing 10%Cr steel10.2355/isijinternational.51.1912 ↗
16. Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation density10.1080/01418617908234871 ↗
17. On the origin of the tensile flow stress in the stainless steel AISI 316 L at 300 K: back stress and effective stress10.1016/S1359-6454(99)00222-0 ↗
18. The cyclic stress-strain response of copper at low strains-I. Constant amplitude testing10.1016/0001-6160(81)90001-8 ↗
19. Experimentally based modeling of cyclically induced softening in a martensitic steel at high temperature
20. Analysis of the hysteresis loops of a martensitic steel Part I: Study of the influence of strain amplitude and temperature under pure fatigue loadings using an enhanced stress partitioning method10.1016/j.msea.2006.08.086 ↗
21. Microstructural evolutions and cyclic softening of 9%Cr martensitic steels
22. Micromechanical model of the high temperature cyclic behavior of 9–12% Cr martensitic steels10.1016/j.ijplas.2011.05.007 ↗
23. A model for the microstructure behavior and strength evolution in lath martensite10.1016/j.actamat.2015.07.018 ↗
24. Cyclic creep process in AISI 316 L stainless steel in terms of dislocation patterns and internal stresses10.1016/j.actamat.2004.03.011 ↗
25. Giroux · 2011
26. A microstructural work hardening model based on three internal state variables10.1016/S0921-5093(00)01728-7 ↗
27. Low cycle fatigue and cyclic softening behavior of martensitic cast steel10.1016/j.engfailanal.2013.06.019 ↗
28. Low-cyclic fatigue behavior of modified 9Cr-1Mo steel at elevated temperature10.1016/j.msea.2014.02.076 ↗
29. Forward and reverse rearrangements of dislocations in tangled walls10.1016/0025-5416(86)90262-4 ↗
30. Evaluation of low cycle fatigue life in AZ31 magnesium alloy10.1016/j.ijfatigue.2006.12.003 ↗
31. Uniaxial ratcheting and fatigue failure of tempered 42CrMo steel: damage evolution and damage-coupled visco-plastic constitutive model10.1016/j.ijplas.2008.06.004 ↗
32. Determination of internal stresses in cyclically deformed copper single crystals using convergent-beam electron diffraction and dislocation dipole separation measurements10.1016/S1359-6454(00)00284-6 ↗
33. Contribution of microstructure and slip system to cyclic softening of 9 wt% Cr steel10.1016/j.ijfatigue.2011.09.004 ↗
34. Investigation of ratcheting characteristics of modified 9Cr-1Mo steel by using the Chaboche constitutive model10.1016/j.ijpvp.2006.12.002 ↗
35. Cyclic stress-strain behavior of 9Cr1Mo steel at positive mean stress10.1016/S0921-5093(01)01094-2 ↗
36. Effects of control mode and R-ratio on the fatigue behavior of a metal matrix composite10.1016/0921-5093(95)07005-2 ↗
37. Petch relation and grain boundary sources
38. A multi-scale crystal plasticity model for cyclic plasticity and low-cycle fatigue in P91 steel at elevated temperature10.1016/j.jmps.2016.12.010 ↗
39. Low cycle fatigue behavior of a 10Cr–2W–Mo–3Co–NbV steel10.1016/j.ijfatigue.2015.11.008 ↗
40. Creep strain modeling of 9 to 12 Pct Cr steels based on microstructure evolution10.1007/s11661-007-9256-9 ↗
41. Multiple mechanisms of lath martensite plasticity10.1016/j.actamat.2016.09.006 ↗
42. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals10.1016/0001-6160(83)90007-X ↗
43. Cyclic deformation and fatigue properties of very fine-grained metals and alloys10.1016/j.ijfatigue.2009.10.007 ↗
44. Influence of temperature on the low cycle fatigue behavior of a modified 9Cr–1Mo ferritic steel10.1016/S0142-1123(02)00035-X ↗
45. Damage mechanics-based creep model for 9–10%Cr ferritic steels10.1016/j.actamat.2010.12.015 ↗
46. Cyclic plastic deformation and cyclic hardening/softening behavior in 304LN stainless steel10.1016/j.tafmec.2010.06.016 ↗
47. Cyclic deformation response of AISI 316 L at room temperature: mechanical behavior, microstructural evolution, physically-based evolutionary constitutive modeling10.1016/j.ijplas.2013.01.017 ↗
48. Work hardening in heterogeneous alloys: a microstructural approach based on three internal state variables10.1016/S1359-6454(00)00289-5 ↗
49. Insights into dynamic strain aging under cyclic creep with reference to strain burst: some new observations and mechanisms part-II: microstructural aspects10.1016/j.msea.2016.02.043 ↗
50. Cyclically induced softening due to low-angle boundary annihilation in a martensitic steel10.1016/j.msea.2005.02.092 ↗
51. Cyclic softening of martensitic steels at high temperature–experiments and physically based modeling10.1016/j.msea.2006.12.183 ↗
52. On the effect of micrograin crystallography on creep of FeCr alloys10.1016/j.msea.2008.11.070 ↗
53. Effect of back-stress on cyclic stress-strain behavior of a quenched and tempered low alloy steel10.1007/BF01209451 ↗
54. Cyclic creep, mechanical ratchetting and amplitude history dependence of modified 9Cr-1Mo steel and evaluation of unified constitutive models10.1299/kikaia.59.2837 ↗
55. Modeling the evolution of dislocation structures upon stress reversal10.1016/j.ijsolstr.2007.02.010 ↗
56. Cyclic behavior of 9–12% Cr steel under different control modes in low cycle regime: a comparative study10.1016/j.ijfatigue.2014.08.006 ↗
57. Ratchetting of viscoplastic material with cyclic softening, part 1: experiments on modified 9Cr-1Mo steel10.1016/j.ijplas.2004.02.001 ↗
58. Ratchetting behavior of advanced 9–12% chromium ferrite steel under creep-fatigue loadings10.1016/j.mechmat.2011.03.002 ↗
59. Ratchetting behavior of advanced 9–12% chromium ferrite steel under creep-fatigue loadings: Fracture modes and dislocation patterns10.1016/j.msea.2012.01.098 ↗
60. Cyclic softening behaviors of modified 9–12%Cr steel under different loading modes: role of loading levels10.1016/j.ijmecsci.2017.07.001 ↗