Thermomechanical behaviors of polyether ether ketone (PEEK) with stretch-induced anisotropy
Source abstract
Abstract
Abstract Polyether ether ketone (PEEK) is a semi-crystalline thermoplastic polymer with excellent thermo-mechanical properties, bio-compatibility, corrosion resistance, and 3D printability. Due to these merits, it has wide applications in aeronautics and biomedical devices. However, PEEK's excellent thermo-mechanical properties come from its complicated crystalline domains, making it hard to predict and to design PEEK structures under complex service conditions. In this paper, we studied the thermomechanical behaviors of PEEK with stretch-induced anisotropy and developed a constitutive model to incorporate the influence of the complex loading history along different loading axes. From the experiments, it was found that when it is stretched, PEEK demonstrates viscoplastic behaviors with reduced transversal modulus and yield stress in the subsequent loading, due to the initiation and growth of voids during stretching. The tensile sample also shows a necking behavior at relatively low temperature. To capture these behaviors, the constitutive model consists of two main parts. The undamaged part has three branches, one hyperelastic branch for the nonlinear elastic behavior, one viscoelastic branch for glass transition and relaxation in the amorphous domains, and one plastic branch for yielding and hardening in the crystalline domains. The damaged loose-chain part with history-dependent reduced relaxation time is used to capture the microscopic interface debonding between the crystallites and the amorphous domains. Compared with the experimental results, this model captures the stretch-induced volume expansion and the anisotropic evolution of material properties. This developed model is also able to capture the temperature-dependent necking phenomenon and the corresponding nominal stress-strain behaviors in the uniaxial tensile tests at different strain rates and temperatures. The developed model can be used to facilitate the design of PEEK-based structures under complicated loading conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Tribology and Wear Analysis · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials10.1016/0022-5096(93)90013-6 ↗
2. Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers10.1016/0167-6636(94)00034-E ↗
3. A fully coupled elastoviscoplastic damage model at finite strains for mineral filled semi-crystalline polymer10.1016/j.ijplas.2013.05.002 ↗
4. Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK10.1016/j.ijsolstr.2019.08.021 ↗
5. Investigation of the dynamic mechanical behavior of polyetheretherketone (PEEK) in the high stress tensile regime10.1007/s11043-013-9211-7 ↗
6. Bergman · 2011
7. Large inelastic deformation of glassy polymers. Part I: rate dependent constitutive model10.1016/0167-6636(88)90003-8 ↗
8. Constitutive model for the finite deformation stress–strain behavior of poly(ethylene terephthalate) above the glass transition10.1016/S0032-3861(99)00406-1 ↗
9. A stress-state-dependent continuum damage model for concrete based on irreversible thermodynamics10.1016/j.ijplas.2016.12.002 ↗
10. Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model10.1016/j.ijplas.2013.06.008 ↗
11. A comprehensive theory of yielding and failure for isotropic materials10.1115/1.2712847 ↗
12. Developments to manufacture structural aeronautical parts in carbon fibre reinforced thermoplastic materials10.1016/S0924-0136(03)00450-3 ↗
13. Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers10.1016/j.ijplas.2007.09.003 ↗
14. Tensile behavior of polyetheretherketone over a wide range of strain rates10.1155/2015/275937 ↗
15. A hyperelastic-based large strain elasto-plastic constitutive formulation with combined isotropic-kinematic hardening using the logarithmic stress and strain measures10.1002/nme.1620300602 ↗
16. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
17. A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: application to PEEK under dynamic loading conditions10.1016/j.ijplas.2016.09.011 ↗
18. Continuum theory of ductile rupture by void nucleation and growth: Part I—Yield criteria and flow rules for porous ductile media10.1115/1.3443401 ↗
19. Gurtin · 2010
20. Relaxation processes in crystalline polymers: experimental behaviour - a review10.1016/0032-3861(85)90192-2 ↗
21. Experiments and modeling of high-crystalline polyethylene yielding under different stress states10.1016/j.ijplas.2013.06.004 ↗
22. The strain-rate and temperature dependence of the mechanical properties of polyetherketone and polyetheretherketone10.1007/BF00357847 ↗
23. Crystallinity in PEEK and PEK after mechanical testing and its dependence on strain rate and temperature10.1002/(SICI)1099-0488(199603)34:4<699::AID-POLB10>3.0.CO;2-C ↗
24. Influence of mechanically-induced dilatation on the shape memory behavior of amorphous polymers at large deformation10.1007/s11043-018-9376-1 ↗
25. The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
26. Hill · 1998
27. New insight on initiation of cavitation in semicrystalline polymers
28. Crystallization behavior and morphological characterization of poly(ether ether ketone)10.1016/j.polymer.2014.08.045 ↗
29. Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate10.1016/j.polymer.2005.06.073 ↗
30. Thermo-mechanical response of nylon 101 under uniaxial and multi-axial loadings: Part I, Experimental results over wide ranges of temperatures and strain rates10.1016/j.ijplas.2005.10.001 ↗
31. Thermo-mechanical coupling of a viscoelastic-viscoplastic model for thermoplastic polymers: Thermodynamical derivation and experimental assessment10.1016/j.ijplas.2018.11.016 ↗
32. PEEK biomaterials in trauma, orthopedic, and spinal implants10.1016/j.biomaterials.2007.07.013 ↗
33. Variation of PEEK matrix crystallinity in APC-2 composite subjected to large shearing deformations10.1016/S0266-3538(99)00169-4 ↗
34. Three dimensional quantification of anisotropic void evolution in deformed semi-crystalline polyamide 610.1016/j.ijplas.2016.04.001 ↗
35. Elastic-plastic deformation at finite strains10.1115/1.3564580 ↗
36. Double-melting behavior of poly(ether ether ketone)10.1021/ma00172a028 ↗
37. Influence of structural relaxation on thermomechanical and shape memory performances of amorphous polymers10.1016/j.polymer.2016.12.047 ↗
38. Lemaitre · 1992
39. Thermomechanical model for monotonic and cyclic loading of PEEK10.1016/j.mechmat.2018.11.005 ↗
40. Rate Mechanism of Plasticity in the crystalline component of semicrystalline Nylon-610.1021/ma00101a031 ↗
41. Chain mobility in the amorphous region of nylon 6 observed under active uniaxial deformation10.1126/science.288.5463.116 ↗
42. Rupture of polymers by chain scission10.1016/j.eml.2017.01.003 ↗
43. Finite viscoplasticity of amorphous glassy polymers in the logarithmic strain space10.1016/j.ijsolstr.2008.08.029 ↗
44. Flow-Induced Crystallization of PEEK: Isothermal Crystallization Kinetics and Lifetime of Flow-Induced Precursors during Isothermal Annealing10.1021/acsmacrolett.6b00326 ↗
45. A thermoviscoelastic model for amorphous shape memory polymers: incorporating structural and stress relaxation10.1016/j.jmps.2008.04.007 ↗
46. Arrhenius-type temperature dependence of the segmental relaxation below T g10.1063/1.479046 ↗
47. Molecular model of drawing polyethylene and polypropylene10.1007/BF00550305 ↗
48. True intrinsic mechanical behaviour of semi-crystalline and amorphous polymers: Influences of volume deformation and cavities shape10.1016/j.ijplas.2012.07.007 ↗
49. Formulation and implementation of a constitutive model for semicrystalline polymers10.1016/j.ijplas.2014.05.010 ↗
50. The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response10.1016/j.polymer.2006.11.032 ↗
51. Covalent mechanochemistry: theoretical concepts and computational tools with applications to molecular nanomechanics10.1021/cr200399q ↗
52. Plastic yielding of semicrystalline polymers affected by amorphous phase10.1016/j.ijplas.2012.07.008 ↗
53. Rubinstein · 2003
54. Intrinsic deformation behavior of semicrystalline polymers10.1021/ma035279t ↗
55. Approximate macroscopic yield criteria for Drucker-Prager type solids with spheroidal voids10.1016/j.ijplas.2017.09.008 ↗
56. Variational and projection methods for the volume constraint in finite deformation elasto-plasticity10.1016/0045-7825(85)90033-7 ↗
57. Simo · 1998
58. The effects of crystallinity on the mechanical properties of PEEK polymer and graphite fiber reinforced PEEK10.1177/002199838702101104 ↗
59. Treloar · 1975
60. Sequential evaluation of continuous deformation field of semi-crystalline polymers during tensile deformation accompanied by neck propagation10.1016/j.ijplas.2011.07.009 ↗
61. Extrusion-based additive manufacturing of PEEK for biomedical applications10.1080/17452759.2015.1097053 ↗
62. Nanoscale deformation analysis with high-resolution transmission electron microscopy and digital image correlation
63. A 3D finite deformation constitutive model for amorphous shape memory polymers: a multi-branch modeling approach for nonequilibrium relaxation processes10.1016/j.mechmat.2011.09.004 ↗
64. Thermal conductivity of porous media. I. Unconsolidated sands10.1063/1.1728419 ↗
65. Molecular dynamics simulation of the effects of layer thickness and chain tilt on tensile deformation mechanisms of semicrystalline polyethylene10.1021/acs.macromol.6b01748 ↗
66. Reduced time as a unified parameter determining fixity and free recovery of shape memory polymers10.1038/ncomms4066 ↗
67. A thermomechanical constitutive model for an epoxy based shape memory polymer and its parameter identifications10.1007/s11043-014-9237-5 ↗
68. Deformation-mediated superstructures and cavitation of poly (l-lactide): In-situ small-angle X-ray scattering study10.1016/j.polymer.2011.12.002 ↗
69. Direct investigations on strain-induced cold crystallization behavior and structure evolutions in amorphous poly(lactic acid) with SAXS and WAXS measurements10.1016/j.polymer.2016.03.014 ↗
70. Stretch-induced crystalline structural evolution and cavitation of poly(butylene adipate-ran-butylene terephthalate)/poly(lactic acid) immiscible blends