journal article·2022-01

Polyacrylamide hydrogels. IV. Near-perfect elasticity and rate-dependent toughness

Sammy Hassan, Junsoo Kim, Zhigang suo

Publisher page

Abstract

Abstract A polyacrylamide hydrogel exhibits near-perfect elasticity: its stress-stretch curve is rate-independent and has negligible hysteresis. The near-perfect elasticity results from the large amount of water between the polymer chains. Water has low viscosity and lubricates polymer chains. Here we report that the polyacrylamide hydrogel exhibits rate-dependent toughness when the polymer chains are long. We interpret this finding as follows. Toughness is measured by rupturing a hydrogel containing a precut crack. When the hydrogel is stretched, at the crack tip, some polymer chains slide relative to others. Before a polymer chain breaks, high tension is distributed over a long length of the chain. Breaking the chain releases the energy stored in the long length of the chain. It is this deconcentration of tension that toughens the hydrogel. When the hydrogel is stretched at a high rate, however, the polymer chain at the crack tip does not have time to slip fully, so that the high tension only transmits over a short segment of the chain. Breaking the chain will lead to a lower toughness. Consequently, the toughness decreases as the stretch rate increases. We invoke a shear lag model and find that the toughness scales with stretch rate as Gc ∼ (dλ/dt)−1/4.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications · Rheology and Fluid Dynamics Studies · Elasticity and Material Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. The elasticity and strength of paper and other fibrous materials10.1088/0508-3443/3/3/302 ↗
2. Mechanics of an adhesive tape in a zero degree peel test–Effect of large deformation and material nonlinearity10.1039/C8SM01731J ↗
3. Mechanical behavior of unidirectional fiber reinforced soft composites10.1016/j.eml.2020.100642 ↗
4. Fracture, fatigue, and friction of polymers in which entanglements greatly outnumber crosslinks10.1126/science.abg6320 ↗
5. The strength of highly elastic materials
6. Time evolution of overstress profiles near broken fibers in a composite with a viscoelastic matrixAuthor links open overlay panel10.1016/0020-7683(89)90103-0 ↗
7. Toughness of a composite in which sliding between fibers and matrix is rate-sensitive10.1016/j.eml.2021.101317 ↗
8. Rupture of rubber. IX. Role of hysteresis in the tearing of rubber
9. A poroelastic signature of the dry/wet state of a crack tip propagating steadily in a physical hydrogel10.1016/j.eml.2018.04.004 ↗
10. Poroelastic toughening in polymer gels–A theoretical and numerical study10.1016/j.jmps.2016.04.017 ↗
11. Rupture of rubber. I. Characteristic energy for tearing10.1002/pol.1953.120100303 ↗
12. Dependence of the ultimate properties of a GR-S rubber on strain rate and temperature10.1002/pol.1958.1203212409 ↗
13. Strength and toughness of adhesion of soft materials measured in lap shear10.1016/j.jmps.2020.103988 ↗
14. Delayed fracture in gels10.1039/c2sm25553g ↗
15. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
16. Steady-state crack growth in polymer gels–A linear poroelastic analysis10.1016/j.jmps.2018.05.008 ↗