journal article·2021-07Open access

3D architected isotropic materials with tunable stiffness and buckling strength

Fengwen Wang, O. Sigmund

Abstract

This paper presents a class of 3D single-scale isotropic materials with tunable stiffness and buckling strength obtained via topology optimization and subsequent shape optimization. Compared to stiffness-optimal closed-cell plate material, the material class reduces the Young's modulus to a range from 79% to 58%, but improves the uniaxial buckling strength to a range from 180% to 767%. Based on small deformation theory, material stiffness is evaluated using the homogenization method. Buckling strength under a given macroscopic stress state is estimated using linear buckling analysis with Block-Floquet boundary conditions to capture both short and long wavelength buckling modes. The 3D isotropic single-scale materials with tunable properties are designed using topology optimization, and are then further simplified using shape optimization. Both topology and shape optimized results demonstrate that material buckling strength can be significantly enhanced by hybrids between truss and variable thickness plate structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Topology Optimization in Engineering · Structural Analysis and Optimization · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Topology optimization using petsc: An easy-to-use, fully parallel, open source topology optimization framework10.1007/s00158-014-1157-0 ↗
2. Paraview: An end-user tool for large data visualization
3. On the competition for ultimately stiffness and strong architected materials10.1016/j.matdes.2020.109356 ↗
4. Andersen · 2021
5. Design of manufacturable 3d extremal elastic microstructure10.1016/j.mechmat.2013.09.018 ↗
6. Balay · 2016
7. Material interpolation schemes in topology optimization10.1007/s004190050248 ↗
8. Bendsøe · 2003
9. Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness10.1038/nature21075 ↗
10. Nonlinear compressive stability of hyperelastic 2d lattices at finite volume fractions10.1016/j.jmps.2019.103851 ↗
11. Brillouin · 1953
12. Mechanics of low density materials10.1016/0022-5096(86)90037-2 ↗
13. Designing meta material slabs exhibiting negative refraction using topology optimization10.1007/s00158-016-1411-8 ↗
14. Cook · 2002
15. Three-dimensional manufacturing tolerant topology optimization with hundreds of millions of local stress constraints10.1002/nme.6548 ↗
16. Revisiting topology optimization with buckling constraints10.1007/s00158-019-02253-3 ↗
17. Homogenization and optimal bounds in linear elasticity10.1007/BF00280908 ↗
18. Homogenization of nonlinearly elastic materials, microscopic bifurcation and macroscopic loss of rank-one convexity10.1007/BF00380256 ↗
19. Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods10.1016/0045-7825(90)90148-F ↗
20. The elastic moduli of heterogeneous materials10.1115/1.3636446 ↗
21. A review of homogenization and topology optimization I - homogenization theory for media with periodic structure10.1016/S0045-7949(98)00131-X ↗
22. Slepc: A scalable and flexible toolkit for the solution of eigenvalue problems10.1145/1089014.1089019 ↗
23. Systematic control design by optimizing a vector performance index10.1016/B978-0-08-024488-4.50022-X ↗
24. Filters in topology optimization based on Helmholtz-type differential equations10.1002/nme.3072 ↗
25. Length scale and manufacturability in density-based topology optimization10.1007/s00419-015-1106-4 ↗
26. Milton · 1986 · 150
27. Topology optimization of periodic microstructures with a penalization of highly localized buckling modes10.1002/nme.449 ↗
28. Neves · 2002
29. Universal elastic anisotropy index10.1103/PhysRevLett.101.055504 ↗
30. Materials with prescribed constitutuve parameters: An inverse homogenization problem10.1016/0020-7683(94)90154-6 ↗
31. A new class of extremal composites10.1016/S0022-5096(99)00034-4 ↗
32. On the (non-) optimality of Michell structures10.1007/s00158-016-1420-7 ↗
33. The method of moving asymptotes–a new method for structural optimization10.1002/nme.1620240207 ↗
34. 3d plate-lattices: An emerging class of low-density metamaterial exhibiting optimal isotropic stiffness
35. Buckling strength topology optimization of 2d periodic materials based on linearized bifurcation analysis10.1016/j.cma.2018.04.031 ↗
36. Structural optimization considering smallest magnitude eigenvalues: a smooth approximation10.1007/s40430-016-0583-x ↗
37. Comparison of microscopic and macroscopic instabilities in a class of two-dimensional periodic composites10.1016/0022-5096(93)90039-I ↗
38. Systematic design of 3d auxetic lattice materials with programmable Poisson’s ratio for finite strains10.1016/j.jmps.2018.01.013 ↗
39. Maximizing the quality factor to mode volume ratio for ultra-small photonic crystal cavities10.1063/1.5064468 ↗
40. Simple optimal lattice structures for arbitrary loadings10.1016/j.eml.2019.03.004 ↗
41. On projection methods, convergence and robust formulations in topology optimization10.1007/s00158-010-0602-y ↗
42. Numerical investigation of stiffness and buckling response of simple and optimized infill structures10.1007/s00158-020-02525-3 ↗
43. A review on feature-mapping methods for structural optimization
44. Use of incompatible displacement modes for the calculation of element stiffnesses or stresses10.1016/0168-874X(90)90034-C ↗
45. Wilson · 1973 · 43