journal article·2021-11

A multi-physics approach on modeling of hygrothermal aging and its effects on constitutive behavior of cross-linked polymers

Amir Bahrololoumi, Vahid Morovati, Mamoon Shaafaey, Roozbeh Dargazany

Publisher page

Abstract

Abstract A multi-physics model is proposed to predict the changes in the constitutive behavior of cross-linked polymeric systems due to damages induced by deformation, oxidation, moisture, and temperature. Coupling the concept of network evolution, hydrolysis, and thermo-oxidation aging, we hypothesize that the synergized effects of deformation-induced damage, as well as different environmental factors such as humidity, temperature, and oxygen, can be taken into account through a generic model. Deformation-induced damage is due to the chain breakage while hygrothermal aging results from the interaction of elastomeric components with moisture in the presence of oxygen and temperature. Results indicate that hygrothermal aging can be considered as a consequence of damage accumulation of two concurrent aging mechanisms, namely; (i) thermo-oxidative, and (ii) hydrolytic aging. In order to capture the mutual effects of thermo-oxidative and hydrolytic aging, the assumption has been made that each of the aging phenomena can be superimposed upon each other. In fact, each of them acts independently, and as a result, they can propagate hygrothermal aging in collaboration. In view of multiple kinetics involved in hygrothermal aging, its effect has been induced by the concurrent effects of three micro-mechanisms; (i) chain scission due to the presence of temperature, (ii) reduction of cross-links attributed to the attendance of water, and (iii) formation of cross-links as a repercussion of oxygen present in the environment. Utilizing the theory of network decomposition, all phenomena and their correlation were modeled, and thus, the strain energy function of the polymer matrix is written with respect to four independent mechanisms; (i) the shrinking original matrix that has neither been attacked by water nor oxygen, (ii) conversion of the first network to two new networks due to reduction and formation of cross-links, and (iii) energy loss from network degradation due to water attrition to polymer active agents. The proposed model cannot consider variation in oxygen density since it has been derived for cases where there is abundant oxygen. In this respect, the model is valid for a slow aging process that occurs in super-thin samples. Finally, the model is validated with respect to extensive sets of our experimental data. In view of its interoperability, precision, and deep insight it provides into the nature of the aging phenomenon, the model is a good choice for advanced implementation in FE applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · biodegradable polymer synthesis and properties · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Modelling large deformation behaviour under loading–unloading of semicrystalline polymers: application to a high density polyethylene10.1016/j.ijplas.2009.07.005 ↗
2. A physically-based model for thermo-oxidative and hydrolytic aging of elastomers10.1016/j.ijmecsci.2020.106193 ↗
3. A modified network alteration model to predict quasi-static behavior of the cross-linked polymers during hydrolytic aging
4. A multi-physics constitutive model to predict quasi-static behaviour: Hydrolytic aging in thin cross-linked polymers10.1016/j.ijplas.2020.102676 ↗
5. Bahrololumi, A., Dargazany, R., 2019. A micro-mechanical approach to model hydrolytic aging in adhesives. In: American Society of Mechanical Engineers (ASME) 2019 International Mechanical Engineering Congress and Exposition.
6. Accelerated aging effects on carbon fiber/epoxy composites10.1016/j.compositesb.2016.11.004 ↗
7. Mechanical degradation of polypropylene: effect of UV irradiation10.1016/0141-3910(93)90191-K ↗
8. Nylon 6.6 accelerated aging studies: thermal–oxidative degradation and its interaction with hydrolysis10.1016/j.polymdegradstab.2004.11.020 ↗
9. Nylon 6.6 accelerating aging studies: II. Long-term thermal-oxidative and hydrolysis results10.1016/j.polymdegradstab.2010.06.018 ↗
10. Characterization and modeling of filled rubber submitted to thermal aging10.1016/j.ijsolstr.2019.04.013 ↗
11. Multiscale investigation of the poly (N-vinylcarbazole) photoageing mechanism10.1021/jp211358q ↗
12. Review of polymer oxidation and its relationship with materials performance and lifetime prediction10.1016/j.polymdegradstab.2013.06.024 ↗
13. Accelerated aging and lifetime prediction: review of non-Arrhenius behaviour due to two competing processes10.1016/j.polymdegradstab.2005.05.004 ↗
14. Oxidation profiles of thermally aged nitrile rubber10.1016/S0141-3910(97)00113-4 ↗
15. An approach to assess the thermal aging effects on the coupling between inelasticity and network alteration in filled rubbers10.1016/j.ijnonlinmec.2021.103783 ↗
16. Flexible membrane structures for wave energy harvesting: A review of the developments, materials and computational modelling approaches10.1016/j.rser.2021.111478 ↗
17. A network evolution model for the anisotropic Mullins effect in carbon black filled rubbers10.1016/j.ijsolstr.2009.03.022 ↗
18. A generalized network decomposition model for the quasi-static inelastic behavior of filled elastomers10.1016/j.ijplas.2013.12.004 ↗
19. Impact of thermal oxidation on mechanical behaviour of polydicylopentadiene: Case of non-diffusion limited oxidation10.1016/j.polymdegradstab.2020.109294 ↗
20. Accelerated ageing of polylactide in aqueous environments: Comparative study between distilled water and seawater10.1016/j.polymdegradstab.2014.01.020 ↗
21. Accelerated ageing and lifetime prediction of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) in distilled water10.1016/j.polymertesting.2014.07.018 ↗
22. Seawater accelerated ageing of poly (3-hydroxybutyrate-co-3-hydroxyvalerate)10.1016/j.polymdegradstab.2014.04.026 ↗
23. Thermo-oxidative stress relaxation in carbon-filled SBR
24. Ageing of polymer bonds: a coupled chemomechanical modelling approach10.1007/s00161-014-0353-x ↗
25. Influence of thermally-accelerated aging on the dynamic mechanical properties of HTPB coating and crosslinking density-modified model for the payne effect10.3390/polym12020403 ↗
26. Ehrenstein · 2007
27. Hydrolytic degradation of porous crosslinked poly (ɛ-caprolactone) synthesized by high internal phase emulsion templating10.3390/polym12081849 ↗
28. Hydrolytic degradation of polyglyconate B: the relationship between degradation time, strength and molecular weight10.1016/S0142-9612(02)00140-0 ↗
29. Statistical mechanics of cross-linked polymer networks I. Rubberlike elasticity10.1063/1.1723791 ↗
30. A physics-informed assembly of feed-forward neural network engines to predict inelasticity in cross-linked polymers10.3390/polym12112628 ↗
31. Ghaderi, A., Morovati, V., Dargazany, R., 2020b. A Bayesian surrogate constitutive model to estimate failure probability of rubber-like materials. arXiv preprint arXiv:2010.13241.10.1016/j.mechmat.2021.104044 ↗
32. Non-Arrhenius behavior for oxidative degradation of chlorosulfonated polyethylene materials10.1016/j.polymdegradstab.2004.09.004 ↗
33. Extrapolation of accelerated aging data-Arrhenius or erroneous?
34. A physically-based thermo-mechanical model for stretch-induced crystallizable rubbers: Crystallization thermodynamics and chain-network crystallization anisotropy10.1016/j.ijplas.2020.102724 ↗
35. A micromechanics-based model for deformation-induced damage and failure in elastomeric media10.1016/j.ijplas.2021.102976 ↗
36. Thermodynamics and mechanics of stretch-induced crystallization in rubbers10.1103/PhysRevE.97.052501 ↗
37. Prediction of mechanical properties of polychloroprene during thermo-oxidative aging10.1016/j.polymertesting.2005.03.016 ↗
38. Time to failure prediction in rubber components subjected to thermal ageing: A combined approach based upon the intrinsic defect concept and the fracture mechanics10.1016/j.mechmat.2014.07.015 ↗
39. Hiemenz · 2007
40. Thermal oxidation of poly (dicyclopentadiene)-effect of phenolic and hindered amine stabilizers
41. Thermo-oxidative ageing of elastomers: A modelling approach based on a finite strain theory10.1016/j.ijplas.2014.01.012 ↗
42. Analytical network-averaging of the tube model:: Rubber elasticity10.1016/j.jmps.2016.05.030 ↗
43. A continuum-atomistic multi-scale technique for nonlinear behavior of nano-materials10.1016/j.ijmecsci.2018.08.012 ↗
44. A thermodynamically consistent chemo-mechanically coupled large deformation model for polymer oxidation
45. A reaction-driven evolving network theory coupled with phase-field fracture to model polymer oxidative aging10.1016/j.jmps.2021.104347 ↗
46. A homogenized large deformation constitutive model for high temperature oxidation in fiber-reinforced polymer composites10.1016/j.mechmat.2021.103994 ↗
47. Photo-oxidation of acrylic-urethane thermoset networks. Relating materials properties to changes of chemical structure10.1016/j.polymdegradstab.2011.05.011 ↗
48. A review on enhancement of mechanical and tribological properties of polymer composites reinforced by carbon nanotubes and graphene sheet: molecular dynamics simulations10.1016/j.compositesb.2018.12.026 ↗
49. On thermo-viscoelastic experimental characterization and numerical modelling of VHB polymer10.1016/j.ijnonlinmec.2019.103263 ↗
50. Time-and feedback-dependent DLO phenomena in oxidative polymer aging10.1016/j.polymdegradstab.2021.109598 ↗
51. Modeling the mechanics of covalently adaptable polymer networks with temperature-dependent bond exchange reactions10.1039/c3sm27945f ↗
52. A coarse-grained – Atomistic multi-scale method to study the mechanical behavior of heterogeneous FCC nano-materials10.1016/j.commatsci.2021.110725 ↗
53. A micro-macro constitutive model for strain-induced molecular ordering in biopolymers: application to polylactide over a wide range of temperatures10.1016/j.ijplas.2019.07.001 ↗
54. Generalized error-minimizing, rational inverse langevin approximations
55. Martin · 2008
56. A complete thermo-electro-viscoelastic characterization of dielectric elastomers -Part II: continuum modelling approach
57. Analysis of mechanical and thermal properties of carbon and silicon nanomaterials using a coarse-grained molecular dynamics method10.1016/j.ijmecsci.2020.106112 ↗
58. Understanding decay functions and their contribution in modeling of thermal-induced aging of cross-linked polymers10.1016/j.polymdegradstab.2020.109108 ↗
59. Fatigue-induced stress-softening in cross-linked multi-network elastomers: Effect of damage accumulation10.1016/j.ijplas.2021.102993 ↗
60. Improved non-gaussian statistical theory of polymer physicsfor short chains
61. A generalized approach to generate optimized approximations of the inverse Langevin function10.1177/1081286518811876 ↗
62. Necking of double-network gels: Constitutive modeling with microstructural insight10.1103/PhysRevE.102.062501 ↗
63. Affine and non-affine microsphere models for chain scission in polydisperse elastomer networks10.1016/j.mechmat.2021.103857 ↗
64. Synthesis of polyurethanes from solvolysis lignin using a polymerization catalyst: mechanical and thermal properties10.1080/00914030304931 ↗
65. Techno-economic assessment and design optimization of compressed air energy storage using filament wound carbon fiber reinforced plastic pressure vessels10.1016/j.est.2021.102754 ↗
66. Thermal ageing of peroxide-cured NBR, Part I: Effect on bulk properties
67. Identification of viscoplastic parameters of phenomenological constitutive equations for polymers by deterministic and evolutionary approach10.1088/0965-0393/15/2/006 ↗
68. Overview of DLO modeling and approaches to predict heterogeneous oxidative polymer degradation10.1016/j.polymdegradstab.2017.11.014 ↗
69. Experimental investigation of the dynamic mechanical behaviour of chemically aged elastomers10.1007/s00419-014-0971-6 ↗
70. A non-affine micro-macro approach to strain-crystallizing rubber-like materials10.1016/j.jmps.2017.10.007 ↗
71. Crosslink density changes during the hydrolysis of tridimensional polyesters10.1002/mats.201300143 ↗
72. A micromechanics-based model for visco-super-elastic hydrogel-based nanocomposites10.1016/j.ijplas.2021.103042 ↗
73. Effects of hydrothermal aging on moisture absorption and property prediction of short carbon fiber reinforced polyamide 6 composites10.1016/j.compositesb.2018.08.138 ↗
74. Chemorheological response of elastomers at elevated temperatures: experiments and simulations10.1016/j.jmps.2005.07.004 ↗
75. Multi-scale ageing mechanisms of 3D four directional and five directional braided composites’ impact fracture behaviors under thermo-oxidative environment10.1016/j.ijmecsci.2019.02.040 ↗
76. Evidence of thermo-oxidation phenomena occurring during hygrothermal aging of thermosetting resins for RTM composite applications10.1016/j.compositesa.2014.07.007 ↗
77. Compression set of thermoplastic polyurethane under different thermal–mechanical-moisture conditions10.1016/j.polymdegradstab.2011.09.012 ↗
78. Numerical analysis of the heterogeneous ageing of rubber products
79. An anisotropic visco-hyperelastic model for thermally-actuated shape memory polymer-based woven fabric-reinforced composites10.1016/j.ijplas.2020.102697 ↗
80. Accelerated aging studies of silicon-rubber based polymeric insulators used for HV transmission lines10.1016/j.polymertesting.2017.06.015 ↗
81. Constitutive modeling of biodegradable polymers: Hydrolytic degradation and time-dependent behavior10.1016/j.ijsolstr.2013.12.010 ↗
82. Damage-induced hydrolyses modelling of biodegradable polymers for tendons and ligaments repair10.1016/j.jbiomech.2015.05.025 ↗
83. Mechanical study of PLA–PCL fibers during in vitro degradation10.1016/j.jmbbm.2010.12.006 ↗
84. The hygrothermal aging process and mechanism of the novolac epoxy resin10.1016/j.compositesb.2016.09.067 ↗
85. Effects of accelerated aging on thermal, mechanical and shape memory properties of cyanate-based shape memory polymer: I vacuum ultraviolet radiation10.1016/j.polymdegradstab.2017.03.001 ↗
86. Erroneous or Arrhenius: A degradation rate-based model for EPDM during homogeneous ageing10.3390/polym12092152 ↗
87. Erroneous or arrhenius: A degradation rate-based model for EPDM during homogeneous ageing10.3390/polym12092152 ↗
88. Mechanical behaviors and the equivalent network model of self-similar multinetwork elastomers10.1016/j.ijsolstr.2021.111135 ↗