journal article·2023-06Open access

Discovery of quasi-disordered truss metamaterials inspired by natural cellular materials

Akash Singh Bhuwal, Yong Pang, Ian Ashcroft, Wei Sun, Tao Liu

Abstract

Natural cellular materials, such as marine mussels, honeycombs, woods, trabecular bones, plant parenchyma, sponges and protoreaster nodosus, may benefit from the disorderliness within their internal microstructures to achieve damage tolerant behaviors. Inspired by this, we have created quasi-disordered truss metamaterials (QTMs) via introducing spatial coordinate perturbations or strut thickness variations to the perfect, periodic truss lattices. Numerical studies have suggested that the QTMs can exhibit either ductile, damage tolerant behaviors or sudden, catastrophic failure mode, depending on the distribution of the introduced disorderliness. A data-driven approach has been developed, combining deep-learning and global optimization algorithms, to tune the distribution of the disorderliness to achieve the damage tolerant QTM designs. A case study on the QTMs created from a periodic Face Centered Cubic (FCC) lattice has demonstrated that the optimized QTMs can achieve up to 100% increase in ductility at the expense of less than 5% stiffness and 8%–15% tensile strength. Our results suggest a novel design pathway for architected materials to improve damage tolerance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Acoustic Wave Phenomena Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Mechanism for deformation of wood as a honeycomb structure I: Effect of anatomy on the initial deformation process during radial compression
2. Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness10.1038/nature21075 ↗
3. Localization and coalescence of imperfect planar FCC truss lattice metamaterials under multiaxial loadings10.1016/j.mechmat.2021.103996 ↗
4. Cancellous bone and theropod dinosaur locomotion. Part I-an examination of cancellous bone architecture in the hindlimb bones of theropods
5. Effect of imperfections on the yielding of two-dimensional foams10.1016/S0022-5096(99)00030-7 ↗
6. Particle swarm optimization10.1007/978-3-319-93073-2_6 ↗
7. A globally convergent Lagrangian barrier algorithm for optimization with general inequality constraints and simple bounds10.1090/S0025-5718-97-00777-1 ↗
8. A review of speckle pattern fabrication and assessment for digital image correlation10.1007/s11340-017-0283-1 ↗
9. The benefits of structural disorder in natural cellular solids
10. Mechanically robust lattices inspired by deep-sea glass sponges10.1038/s41563-020-0798-1 ↗
11. The microscopic network structure of mussel (mytilus) adhesive plaques10.1098/rsif.2015.0827 ↗
12. An overview of the mechanical properties of foams and periodic lattice materials
13. Fratzl · 2013
14. Fracture characteristic analysis of cellular lattice structures under tensile load10.1016/j.ijsolstr.2019.01.006 ↗
15. Goldberg · 1988
16. Experimental study of modulus, strength and toughness of 2D triangular lattices10.1016/j.ijsolstr.2018.06.028 ↗
17. Cooperative deformation of mineral and collagen in bone at the nanoscale10.1073/pnas.0604237103 ↗
18. A new ANN based crystal plasticity model for FCC materials and its application to non-monotonic strain paths10.1016/j.ijplas.2021.103059 ↗
19. Jia · 2020
20. Keviczky · 2019
21. Optimization by simulated annealing10.1126/science.220.4598.671 ↗
22. Design and mechanical properties of elastically isotropic trusses10.1557/jmr.2018.2 ↗
23. Design optimization of truss-cored sandwiches with homogenization10.1016/j.ijsolstr.2006.04.010 ↗
24. Bi-functional optimization of actively cooled, pressurized hollow sandwich cylinders with prismatic cores10.1016/j.jmps.2007.04.007 ↗
25. Minimum weights of pressurized hollow sandwich cylinders with ultralight cellular cores
26. The origin of the boundary strengthening in polycrystal-inspired architected materials
27. Optimal lattice-structured materials10.1016/j.jmps.2016.07.010 ↗
28. Damage-tolerant architected materials inspired by crystal microstructure10.1038/s41586-018-0850-3 ↗
29. Impact tolerance in mussel thread networks by heterogeneous material distribution10.1038/ncomms3187 ↗
30. The fracture toughness of planar lattices: Imperfection sensitivity10.1016/j.jmps.2007.04.010 ↗
31. Trabecular bone microstructure scales allometrically in the primate humerus and femur10.1098/rspb.2013.0172 ↗
32. Ultralight metallic microlattices10.1126/science.1211649 ↗
33. Theoretical analysis on performance of digital speckle pattern: uniqueness, accuracy, precision, and spatial resolution10.1364/OE.27.022439 ↗
34. 3D plate-lattices: An emerging class of low-density metamaterial exhibiting optimal isotropic stiffness
35. Tensile response of elastoplastic lattices at finite strain10.1016/j.jmps.2017.02.002 ↗
36. Bone-inspired microarchitectures achieve enhanced fatigue life10.1073/pnas.1905814116 ↗
37. Particle-based model to simulate the micromechanics of biological cells10.1103/PhysRevE.81.061906 ↗
38. Quasiperiodic mechanical metamaterials with extreme isotropic stiffness10.1016/j.eml.2019.100596 ↗
39. Deformation and fracture of 3D printed disordered lattice materials: Experiments and modeling
40. A damage-tolerant, dual-scale, single-crystalline microlattice in the knobby starfish, protoreaster nodosus10.1126/science.abj9472 ↗
41. Ultralight, ultrastiff mechanical metamaterials10.1126/science.1252291 ↗