Numerical and experimental crack-tip cohesive zone laws with physics-informed neural networks
Source abstract
Abstract
The cohesive zone law represents the constitutive traction versus separation response along the crack-tip process zone of a material, which bridges the microscopic fracture process to the macroscopic failure behavior. Elucidating the exact functional form of the cohesive zone law is a challenging inverse problem since it can only be inferred indirectly from the far-field in experiments. Here, we construct the full functional form of the cohesive traction and separation relationship along the fracture process zone from far-field stresses and displacements using a physics-informed neural network (PINN), which is constrained to satisfy the Maxwell-Betti's reciprocal theorem with a reciprocity gap to account for the plastically deforming background material. Our numerical studies simulating crack growth under small-scale yielding, mode I loading, show that the PINN is robust in inversely extracting the cohesive traction and separation distributions across a wide range of simulated cohesive zone shapes, even for those with sharp transitions in the traction-separation relationships. Using the far-field elastic strain and residual elastic strain measurements associated with a fatigue crack for a ZK60 magnesium alloy specimen from synchrotron X-ray diffraction experiments, we reconstruct the cohesive traction-separation relationship and observe distinct regimes corresponding to transitions in the micromechanical damage mechanisms.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Ultrasonics and Acoustic Wave Propagation · Model Reduction and Neural Networks
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Cohesive zone modelling-CZM
2. On the influence of the shape of the interface law on the application of cohesive-zone models10.1016/j.compscitech.2004.12.024 ↗
3. Mode I fracture of adhesive joints using tailored cohesive zone models10.1007/s10704-008-9293-4 ↗
4. Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens10.1007/BF00037233 ↗
5. Anderson · 2017
6. Interfacial load transfer mechanisms in carbon nanotube-polymer nanocomposites10.1098/rspa.2017.0705 ↗
7. Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer10.1016/j.ijadhadh.2013.02.006 ↗
8. Some issues in the application of cohesive zone models for metal–ceramic interfaces10.1016/S0020-7683(02)00149-X ↗
9. On the determination of the cohesive zone parameters for the modeling of micro-ductile crack growth in thick specimens10.1023/A:1025426121928 ↗
10. Conservation laws in elasticity of the J-integral type10.1007/BF01590704 ↗
11. Cohesive zone laws for fatigue crack growth: numerical field projection of the micromechanical damage process in an elasto-plastic medium10.1016/j.ijsolstr.2013.12.033 ↗
12. Inverse extraction of interfacial tractions from elastic and elasto-plastic far-fields by nonlinear field projection10.1016/j.jmps.2012.08.007 ↗
13. Vapor pressure and residual stress effects on failure of an adhesive film10.1016/j.ijsolstr.2005.01.012 ↗
14. Cohesive zone laws for void growth — II. Numerical field projection of elasto-plastic fracture processes with vapor pressure10.1016/j.jmps.2009.04.001 ↗
15. The determination of crack bridging forces10.1007/BF00035040 ↗
16. Machine-learning prediction of atomistic stress along grain boundaries10.1016/j.actamat.2021.117387 ↗
17. Two-scale porosity effects on cohesive crack growth in a ductile media10.1016/j.ijsolstr.2020.04.035 ↗
18. Scientific machine learning through physics–informed neural networks: where we are and What's next10.1007/s10915-022-01939-z ↗
19. Da Silva · 2017
20. Determination of traction separation law for interfacial failure in adhesive joints at different loading rates10.1080/00218464.2015.1046986 ↗
21. Solving multi-material problems in solid mechanics using physics-informed neural networks based on domain decomposition technology10.1016/j.cma.2023.116120 ↗
22. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
23. The cohesive zone model: advantages, limitations and challenges10.1016/S0013-7944(01)00083-2 ↗
24. Deformation fields near a steady fatigue crack with anisotropic plasticity10.1016/j.eml.2015.11.006 ↗
25. A simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces10.1088/0965-0393/12/3/007 ↗
26. Control of partial differential equations via physics-informed neural networks10.1007/s10957-022-02100-4 ↗
27. Gladysz · 2020
28. Modelling the nucleation and propagation of cracks at twin boundaries10.1007/s10704-021-00606-y ↗
29. Fracture process zone modeling of monolithic Al2O310.1016/S0013-7944(99)00030-2 ↗
30. The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints10.1016/j.ijsolstr.2008.11.016 ↗
31. Separation work analysis of cohesive law and consistently coupled cohesive law10.1007/s10483-011-1513-x ↗
32. Appropriate shape of cohesive zone model for delamination propagation in ENF specimens with R-curve effects10.1016/j.tafmec.2017.04.009 ↗
33. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
34. Cohesive-zone laws for void growth — I. Experimental field projection of crack-tip crazing in glassy polymers10.1016/j.jmps.2009.04.003 ↗
35. Extraction of cohesive-zone laws from elastic far-fields of a cohesive crack tip: a field projection method10.1016/S0022-5096(03)00023-1 ↗
36. Mechanics of materials: top-down approaches to fracture10.1016/S1359-6454(99)00291-8 ↗
37. A review of cohesive zone modelling as an approach for numerically assessing hydrogen embrittlement of steel structures
38. Exceptionally strong boron nitride nanotube aluminum composite interfaces10.1016/j.eml.2022.101952 ↗
39. The interplay of intra- and inter-layer interactions in bending rigidity of ultrathin 2D materials10.1063/5.0146065 ↗
40. The effects of geometry and material properties on the fracture of single lap-shear joints10.1016/S0020-7683(02)00344-X ↗
41. Inverse extraction of cohesive zone laws by field projection method using numerical auxiliary fields10.1002/nme.4281 ↗
42. Experimental characterization of cohesive zone models for thin adhesive layers loaded in mode I, mode II, and mixed-mode I/II by the use of a direct method10.1016/j.ijsolstr.2018.09.005 ↗
43. Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models10.1016/S0749-6419(02)00008-6 ↗
44. Sliding energy landscape governs interfacial failure of nanotube-reinforced ceramic nanocomposites10.1016/j.scriptamat.2021.114413 ↗
45. Grain boundary traction signatures: quantifying the asymmetrical dislocation emission processes under tension and compression10.1016/j.jmps.2017.03.009 ↗
46. Grain boundary traction signatures: quantitative predictors of dislocation emission10.1103/PhysRevLett.117.085502 ↗
47. A mechanics-informed machine learning approach for modeling the elastoplastic behavior of fiber-reinforced composites10.1016/j.compstruct.2023.117473 ↗
48. Additive manufacturing of Ti6Al4V alloy: a review10.1016/j.matdes.2018.107552 ↗
49. Applied machine learning to predict stress hotspots II: hexagonal close packed materials10.1016/j.ijplas.2018.08.003 ↗
50. Applied machine learning to predict stress hotspots I: face centered cubic materials10.1016/j.ijplas.2018.07.013 ↗
51. Dual-scale porosity effects on crack growth in additively manufactured metals: 3D ductile fracture models10.1016/j.jmps.2021.104727 ↗
52. Dislocation descriptors of low and high angle grain boundaries with convolutional neural networks10.1016/j.eml.2024.102138 ↗
53. Application of hydrogen influenced cohesive laws in the prediction of hydrogen induced stress cracking in 25%Cr duplex stainless steel10.1016/j.engfracmech.2007.09.003 ↗
54. Dynamic and adaptive mesh-based graph neural network framework for simulating displacement and crack fields in phase field models10.1016/j.mechmat.2023.104789 ↗
55. Inverse problems in experimental mechanics10.1007/s11340-008-9160-2 ↗
56. Predicting microstructure-sensitive fatigue-crack path in 3D using a machine learning framework10.1007/s11837-019-03572-y ↗
57. Physics-informed attention-based neural network for hyperbolic partial differential equations: application to the Buckley–Leverett problem10.1038/s41598-022-11058-2 ↗
58. An Accurate and Transferable Machine Learning Potential for Carbon10.1063/5.0005084 ↗
59. Solving real-world optimization tasks using physics-informed neural computing10.1038/s41598-023-49977-3 ↗
60. A systematic approach to generating accurate neural network potentials: the case of carbon10.1038/s41524-021-00508-6 ↗
61. Shalev-Shwartz · 2014
62. Variational principle and reciprocity theorem on the temperature-rate-dependent poro-thermoelasticity theory10.1007/s00707-021-02996-5 ↗
63. Smith · 2009
64. Determination of cohesive laws by the J integral approach10.1016/S0013-7944(03)00127-9 ↗
65. A Paris-law-informed neural fatigue cohesive model and its application to open-hole composite laminates10.1016/j.ijsolstr.2023.112158 ↗
66. Cohesive zone interpretations of phase-field fracture models10.1115/1.4055660 ↗
67. An inverse method to reconstruct crack-tip cohesive zone laws for fatigue by numerical field projection
68. The relation between crack growth resistance and fracture process parameters in elastic-plastic solids10.1016/0022-5096(92)90020-3 ↗
69. Microstructure effects on fatigue crack growth in additively manufactured Ti–6Al–4V10.1016/j.msea.2020.139993 ↗
70. Determination of material parameters in constitutive models using adaptive neural network machine learning10.1016/j.jmps.2023.105324 ↗
71. Data driven modeling of interfacial traction–separation relations using a thermodynamically consistent neural network10.1016/j.cma.2022.115826 ↗
72. Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals10.1016/j.jmps.2004.04.006 ↗
73. Hertzian contact of anisotropic bodies10.1016/0022-5096(66)90036-6 ↗
74. A stochastic description on the traction-separation law of an interface with non-covalent bonding10.1016/j.jmps.2014.05.014 ↗
75. Crack path predictions in heterogeneous media by machine learning10.1016/j.jmps.2022.105188 ↗
76. Plastic anisotropy and twin distributions near the fatigue crack tip of textured Mg alloys from in situ synchrotron X-ray diffraction measurements and multiscale mechanics modeling10.1016/j.jmps.2022.104936 ↗
77. Void nucleation by inclusion debonding in a crystal matrix10.1088/0965-0393/1/2/001 ↗
78. Learning constitutive relations of plasticity using neural networks and full-field data10.1016/j.eml.2022.101645 ↗
79. Cell mechanics: mechanical response, cell adhesion, and molecular deformation10.1146/annurev.bioeng.2.1.189 ↗