A phenomenological plasticity model with non-normality effects representing observations in crystal plasticity
Source abstract
Abstract
Recent experiments on multiaxial plasticity of metal polycrystals have shown that the normality rule, i.e. the fact that the direction of plastic flow is normal to the yield surface, may not be respected during abrupt changes of strain path. This is in contrast to the crystal plasticity mechanisms in the grains of a polycrystal, which are based on Schmid law and associated plasticity. Homogenization theorems prove that the resulting behaviour fulfils the normality requirement. However, this normality is only valid at initial yield, i.e. for the yield surface defined by a vanishingly small offset. For larger offsets considered in practical applications, computations show that the Taylor polycrystal model displays a clear non-normality. The vertex-type response on the smooth yield surface is actually a result of a blunted vertex moving with the current stress point. The present work aims at constructing a simple phenomenological model that includes the apparent non-normality effects exhibited by polycrystal plasticity and confirmed by experiments. For that purpose, the authors propose a model based on a smooth yield surface with a plastic flow rule governed by vertex-type effects at each point of the yield surface. The non-normality is characterized by a scalar-valued function, independent of hardening, giving the angle between the plastic flow direction and the normal to the smooth yield surface. The parameters are calibrated from crystal plasticity simulations of biaxial stretching tests with an abrupt strain loading path change. The validation of the model is made for the prediction of forming limit diagrams using a local necking criterion very sensitive to vertex-type effects.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
2. A six-component yield function for anisotropic materials10.1016/0749-6419(91)90052-Z ↗
3. Plastic behavior and stretchability of sheet metals I. a yield function for orthotropic sheets under plane stress conditions10.1016/0749-6419(89)90019-3 ↗
4. Yield function development for aluminum alloy sheets10.1016/S0022-5096(97)00034-3 ↗
5. On the prediction of necking in anisotropic sheets.
6. A class of phenomenological corner theories of plasticity10.1016/0022-5096(79)90026-7 ↗
7. The essential structure of constitutive laws for metal composites and polycrystals10.1016/0022-5096(67)90018-X ↗
8. A generalized isotropic yield criterion10.1115/1.3422732 ↗
9. Pseudo-corner theory: a simple enhancement of J2-flow theory for applications involving non-proportional loading10.1108/eb023649 ↗
10. Elastic-plastic behavior of polycrystalline metals and composites10.1098/rspa.1970.0177 ↗
11. Sheet necking - III. Strain rate effects.
12. Shear band formation in plane strain10.1016/0020-7683(81)90053-6 ↗
13. Plastic spin associated with a corner theory of plasticity10.1016/S0749-6419(95)00021-6 ↗
14. Roles of plastic spin in shear banding10.1016/S0749-6419(96)00024-1 ↗
15. Use of abrupt strain path change for determining subsequent yield surface: illustrations of basic idea10.1016/S1359-6454(99)00213-X ↗
16. Forming limit diagrams for anisotropic metal sheets with different yield criteria10.1016/S0020-7683(99)00200-0 ↗
17. Effect of strain path change on limits to ductility of anisotropic metal sheets10.1016/S0020-7403(99)00029-6 ↗
18. Kuroda, M., Tvergaard, V., 2001. Plastic spin associated with a non-normality theory of plasticity, (submitted).10.1016/S0997-7538(01)01169-X ↗
19. Use of abrupt strain path change for determining subsequent yield surface: experimental study with metal sheets10.1016/S1359-6454(00)00048-3 ↗
20. Physical theory of plasticity10.1016/S0065-2156(08)70344-2 ↗
21. Upper-bound anisotropic yield locus calculations assuming 〈 111〉-pencil glide10.1016/0020-7403(80)90011-9 ↗
22. Limit strains in the processes of stretch-forming sheet metal10.1016/0020-7403(67)90066-5 ↗
23. Aspects of plastic post-buckling behaviour.
24. Limits to formability in rate-sensitive metal sheets.
25. Predictions of limit strains in sheet metal using a more general yield criterion10.1016/0020-7403(78)90041-3 ↗
26. A tangent modulus method for rate dependent solids10.1016/0045-7949(84)90033-6 ↗
27. The effect of loading path on the yield surface at elevated temperatures10.1016/0020-7683(72)90017-0 ↗
28. A J2-flow theory exhibiting a corner-like effect and suitable for large-scale computation10.1016/0045-7825(87)90022-3 ↗
29. Localized necking in thin sheets10.1016/0022-5096(75)90004-6 ↗
30. Effect of kinematic hardening on localized necking in biaxially stretched sheets10.1016/0020-7403(78)90023-1 ↗
31. Bifurcation and imperfection-sensitivity at necking instabilities
32. On crystal plasticity FLD analysis10.1098/rspa.1997.0099 ↗
33. On the mechanics of large inelastic deformations: noncoaxiality, axial effects in torsion and localization10.1007/BF01299794 ↗
34. On the mechanics of large inelastic deformations: kinematics and constitutive modeling10.1007/BF01340705 ↗