Prediction of fracture toughness of ceramic composites as function of microstructure: I. Numerical simulations
Source abstract
Abstract
Abstract The evaluation of macroscopic material parameters such as fracture toughness as functions of microstructural attributes is a fundamental issue in material science. The task requires the quantification of both microstructure and material response. Currently, no systematic approach other than experiments exists for establishing microstructure–fracture toughness relations for materials. In this paper, we present a multi-scale computational framework based on the cohesive finite element method (CFEM) for predicting fracture toughness of materials as a function of microstructure. This framework provides a means for evaluating fracture toughness through explicit simulation of fracture processes in microstructures. The approach uses the J -integral, allowing fracture toughness to be calculated for microstructures with random heterogeneous phase distributions and fracture processes with arbitrary crack paths or micro-crack patterns. Calculations carried out concern two-phase Al 2 O 3 /TiB 2 ceramic composites and focus on the effects of constitute behavior, phase morphology, phase distribution, phase size scale, and interphase bonding on fracture toughness. Results show that microstructure and constituent properties can significantly influence fracture behavior and combine to determine the overall fracture toughness through the activation of different fracture mechanisms. In particular, a combination of fine microstructure size scale, rounded reinforcement morphology, appropriately balanced interphase bonding strength and compliance can best promote desirable crack–reinforcement interactions and lead to enhanced fracture toughness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Advanced ceramic materials synthesis · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Anderson · 1995
2. Use of digital image analysis to estimate fluid permeability of porous materials: application of two-point correlation functions10.1063/1.337245 ↗
3. Computational modelling of impact damage in brittle materials10.1016/0020-7683(95)00255-3 ↗
4. Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects10.1016/S0924-0136(03)00396-0 ↗
5. The relationship between fracture toughness and microstructure in the cleavage fracture of mild steel10.1179/030634576790431453 ↗
6. Evaluation of lower bound fracture-toughness values using Weibull analysis of single specimen data10.1016/0013-7944(85)90001-3 ↗
7. A method for dynamic fracture initiation testing of ceramics10.1115/1.3226057 ↗
8. Modeling impact induced delamination of woven fiber reinforced composites with contact/cohesive laws10.1016/S0045-7825(99)00222-4 ↗
9. Perspective on the development of high-toughness ceramics10.1111/j.1151-2916.1990.tb06493.x ↗
10. Freund · 1998
11. Particle-size, volume fraction and matrix strength effects on fatigue behavior and particle fracture in 2124 Aluminum-Sicp composites10.1016/0921-5093(94)90891-5 ↗
12. Dynamic fracture toughness10.1007/BF00019707 ↗
13. Fatigue in Sic-particulate-reinforced Aluminum-alloy composites10.1016/0921-5093(91)90285-U ↗
14. Li, Y., Zhou, M. Prediction of fracture toughness of ceramic composites as a function of microstructure: II. Analytical model. J. Mech. Phys. Solids, http://dx.doi.org/10.1016/j.jmps.2012.09.011, in press.10.1016/j.jmps.2012.09.011 ↗
15. Statistical analysis of cleavage fracture ahead of sharp cracks and rounded notches10.1016/0001-6160(86)90166-5 ↗
16. Computational analysis of dynamically propagating cracks in axisymmetric solids10.1007/BF00012936 ↗
17. Logan, K.V., 1996. Composite Ceramics, Final Technical Report. USSTACOM DAAEO7-95-C-R040.
18. Mandell · 1974
19. A micro-mechanical model for crack growth resistance of particulate-reinforced metal–matrix composites10.1007/BF00570067 ↗
20. A general treatment of crack tip contour integrals10.1007/BF00276359 ↗
21. Computational methods based on an energy integral in dynamic fracture10.1007/BF00017970 ↗
22. An analysis of tensile decohesion along an interface10.1016/0022-5096(90)90001-K ↗
23. Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7 ↗
24. An efficient adaptive procedure for three-dimensional fragmentation simulations10.1007/s003660200013 ↗
25. Russ · 2007
26. Dynamic fracture toughness of porous ceramics rapid communications of the American Ceramic Society10.1111/j.1551-2916.2010.04133.x ↗
27. Seul · 2000
28. Quantitative characterization of spatial clustering in three-dimensional microstructures using two-point correlation functions10.1016/j.actamat.2003.09.016 ↗
29. Bounds for element size in a variable stiffness cohesive finite element model10.1002/nme.1138 ↗
30. Random heterogeneous materials: microstructure and macroscopic properties10.1115/1.1483342 ↗
31. Evaluation of static and dynamic fracture toughness in ceramics10.1016/0013-7944(88)90243-3 ↗
32. Morphology based domain partitioning of multi-phase materials: a preprocessor for multi-scale modelling10.1002/nme.1834 ↗
33. The scatter in KIC—results10.1016/0013-7944(84)90153-X ↗
34. Macroscopic nature of brittle fracture
35. Theory based statistical interpretation of brittle fracture toughness of reactor pressure vessel steel 15X2MφA and its welds10.1016/0029-5493(92)90225-K ↗
36. A statistical theory of the strength of materials
37. Brittle-fracture and toughening mechanisms in ceramics10.1146/annurev.ms.14.080184.002105 ↗
38. Numerical simulations of dynamic interfacial crack growth allowing for crack growth away from the bond line10.1007/BF00033830 ↗
39. Numerical simulations of fast crack-growth in brittle solids10.1016/0022-5096(94)90003-5 ↗
40. Yu · 2001
41. Micromechanical simulation of dynamic fracture using the cohesive finite element method10.1115/1.1647127 ↗
42. Zohdi · 2008