journal article·2015-11

Stiffness threshold of randomly distributed carbon nanotube networks

Yuli Chen, Fei Pan, Zaoyang Guo, Bin Liu, Jianyu Zhang

Publisher page

Abstract

Abstract For carbon nanotube (CNT) networks, with increasing network density, there may be sudden changes in the properties, such as the sudden change in electrical conductivity at the electrical percolation threshold. In this paper, the change in stiffness of the CNT networks is studied and especially the existence of stiffness threshold is revealed. Two critical network densities are found to divide the stiffness behavior into three stages: zero stiffness, bending dominated and stretching dominated stages. The first critical network density is a criterion to judge whether or not the network is capable of carrying load, defined as the stiffness threshold. The second critical network density is a criterion to measure whether or not most of the CNTs in network are utilized effectively to carry load, defined as bending–stretching transitional threshold. Based on the geometric probability analysis, a theoretical methodology is set up to predict the two thresholds and explain their underlying mechanisms. The stiffness threshold is revealed to be determined by the statical determinacy of CNTs in the network, and can be estimated quantitatively by the stabilization fraction of network, a newly proposed parameter in this paper. The other threshold, bending–stretching transitional threshold, which signs the conversion of dominant deformation mode, is verified to be well evaluated by the proposed defect fraction of network. According to the theoretical analysis as well as the numerical simulation, the average intersection number on each CNT is revealed as the only dominant factor for the electrical percolation and the stiffness thresholds, it is approximately 3.7 for electrical percolation threshold, and 5.2 for the stiffness threshold of 2D networks. For 3D networks, they are 1.4 and 4.4. And it also affects the bending–stretching transitional threshold, together with the CNT aspect ratio. The average intersection number divided by the fourth root of CNT aspect ratio is found to be an invariant at the bending–stretching transitional threshold, which is 6.7 and 6.3 for 2D and 3D networks, respectively. Based on this study, a simple piecewise expression is summarized to describe the relative stiffness of CNT networks, in which the relative stiffness of networks depends on the relative network density as well as the CNT aspect ratio. This formula provides a solid theoretical foundation for the design optimization and property prediction of CNT networks.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Graphene research and applications · Nanopore and Nanochannel Transport Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. ABAQUS, 2005. ABAQUS/standard User’s Manual, Version 6.5. Hibbitt, Karlsson, & Sorensen, Inc.
2. Giant-stroke, superelastic carbon nanotube aerogel muscles10.1126/science.1168312 ↗
3. Mechanical and electrical properties of a MWNT/epoxy composite10.1016/S0266-3538(02)00129-X ↗
4. Excluded volume and its relation to the onset of percolation10.1103/PhysRevB.30.3933 ↗
5. The formation of a connection between carbon nanotubes in an electron beam10.1021/nl015541g ↗
6. A review and analysis of electrical percolation in carbon nanotube polymer composites10.1016/j.compscitech.2008.06.018 ↗
7. Pseudo-percolation: critical volume fractions and mechanical percolation in polymer nanocomposites10.1016/j.compscitech.2011.04.010 ↗
8. Effect of nanorope waviness on the effective moduli of nanotube sheets10.1063/1.1687989 ↗
9. Mechanical properties of nanotube sheets: alterations in joint morphology and achievable moduli in manufacturable materials10.1063/1.1687995 ↗
10. A single-walled-carbon-nanotube filter for removal of viral and bacterial pathogens10.1002/smll.200700863 ↗
11. Carbon nanotube aerogels10.1002/adma.200601748 ↗
12. Super-compressible foamlike carbon nanotube films10.1126/science.1118957 ↗
13. Modelling of exfoliated graphite10.1016/j.pmatsci.2004.01.001 ↗
14. Effect of imperfections on the yielding of two-dimensional foams10.1016/S0022-5096(99)00030-7 ↗
15. Micromechanical analysis of strain rate-dependent deformation and failure in composite microstructures under dynamic loading conditions10.1016/j.ijplas.2011.10.008 ↗
16. Failure analysis and the optimal toughness design of carbon nanotube-reinforced composites10.1016/j.compscitech.2010.04.015 ↗
17. A theoretical evaluation of load transfer in multi-walled carbon nanotubes10.1016/j.carbon.2010.09.003 ↗
18. Theoretical estimation on the percolation threshold for polymer matrix composites with hybrid fillers10.1016/j.compstruct.2015.01.013 ↗
19. Effects of geometrical and mechanical properties of fiber and matrix on composite fracture toughness10.1016/j.compstruct.2014.12.011 ↗
20. Interconnection of carbon nanotubes by chemical functionalization10.1063/1.1480487 ↗
21. Mechanics of low density materials10.1016/0022-5096(86)90037-2 ↗
22. Effective stiffness of randomly oriented fibre composites10.1177/002199837200600407 ↗
23. Gas permeability of a buckypaper membrane10.1021/nl0259131 ↗
24. The elasticity and strength of paper and other fibrous materials10.1088/0508-3443/3/3/302 ↗
25. Foam topology: bending versus stretching dominated architectures10.1016/S1359-6454(00)00379-7 ↗
26. Rigidity percolation on the square lattice10.1209/0295-5075/96/54002 ↗
27. Torsional carbon nanotube artificial muscles10.1126/science.1211220 ↗
28. Lightning strike protection of composites10.1016/j.paerosci.2013.07.002 ↗
29. Gibson · 1999
30. Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites10.1016/j.polymer.2006.01.029 ↗
31. Carbon nanofiber paper for lightning strike protection of composite materials10.1016/j.compositesb.2009.06.009 ↗
32. Influence of wavy imperfections in cell walls on elastic stiffness of cellular solids10.1016/S0022-5096(97)00035-5 ↗
33. Carbon nanotube sponges10.1002/adma.200902986 ↗
34. Three-dimensional carbon nanotube scaffolds as particulate filters and catalyst support membranes10.1021/nn100150x ↗
35. Deformation of cross-linked semiflexible polymer networks10.1103/PhysRevLett.91.108102 ↗
36. Generic rigidity percolation in two dimensions10.1103/PhysRevE.53.3682 ↗
37. The mechanical behavior of porous metal fiber sintered sheets10.1016/j.jmps.2012.08.006 ↗
38. The effects of micro-defects and crack on the mechanical properties of metal fiber sintered sheets10.1016/j.ijsolstr.2014.02.004 ↗
39. Rigidity and dynamics of random spring networks10.1103/PhysRevLett.77.2730 ↗
40. Single‐walled carbon nanotube aerogel‐based elastic conductors10.1002/adma.201100310 ↗
41. Deformation–morphology correlations in electrically conductive carbon nanotube—thermoplastic polyurethane nanocomposites10.1016/j.polymer.2005.02.025 ↗
42. Two percolation thresholds in carbon nanotube epoxy composites10.1016/j.compscitech.2006.02.037 ↗
43. Effect of nanotube waviness on the electrical conductivity of carbon nanotube-based composites10.1016/j.compscitech.2007.10.056 ↗
44. In situ fabrication of depth-type hierarchical CNT/quartz fiber filters for high efficiency filtration of sub-micron aerosols and high water repellency10.1039/c3nr34325a ↗
45. Large-scale aligned carbon nanotubes from their purified, highly concentrated suspension10.1021/nn901326m ↗
46. A three-dimensional model of electrical percolation thresholds in carbon nanotube-based composites10.1063/1.3443731 ↗
47. State of the art of carbon nanotube fibers: opportunities and challenges10.1002/adma.201104672 ↗
48. A three-dimensional Monte Carlo model for electrically conductive polymer matrix composites filled with curved fibers10.1016/j.polymer.2008.07.034 ↗
49. High-strength composite fibers: realizing true potential of carbon nanotubes in polymer matrix through continuous reticulate architecture and molecular level couplings10.1021/nl901035v ↗
50. Molecular dynamics simulation of the ice nucleation and growth process leading to water freezing10.1038/416409a ↗
51. Mendenhall · 2012
52. Thermal and electrical conductivity of single-and multi-walled carbon nanotube-epoxy composites10.1016/j.compscitech.2005.10.016 ↗
53. Polymer nanocomposites containing carbon nanotubes10.1021/ma060733p ↗
54. Reconsideration of continuum percolation of isotropically oriented sticks in three dimensions10.1103/PhysRevE.59.3717 ↗
55. Improved inter-tube coupling in CNT bundles through carbon ion irradiation10.1016/j.carbon.2012.08.026 ↗
56. A theoretical quantification of the possible improvement in the mechanical properties of carbon nanotube bundles by carbon ion irradiation10.1016/j.carbon.2012.11.021 ↗
57. Easy preparation of self-assembled high-density buckypaper with enhanced mechanical properties10.1021/nl5033588 ↗
58. Equivalent beams for carbon nanotubes10.1016/j.commatsci.2007.12.010 ↗
59. Vibration promotes heat welding of single-walled carbon nanotubes10.1016/j.cplett.2010.12.068 ↗
60. Carbon nanotube networks as gas sensors for NO2 detection10.1016/j.talanta.2008.07.025 ↗
61. A numerical approximation to the elastic properties of sphere-reinforced composites10.1016/S0022-5096(02)00021-2 ↗
62. Multi-wall carbon nanotube networks as potential resistive gas sensors for organic vapor detection10.1016/j.carbon.2011.02.020 ↗
63. Structure and gas permeability of multi-wall carbon nanotube buckypapers10.1016/j.carbon.2007.02.022 ↗
64. Mechanical properties of SWNT X-Junctions through molecular dynamics simulation10.1080/19475411.2011.640361 ↗
65. A novel failure analysis of multi-walled carbon nanotubes in epoxy matrix10.1016/j.polymer.2011.03.002 ↗
66. Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes10.1016/j.compscitech.2011.07.016 ↗
67. Timoshenko · 1945
68. Underwood · 1970
69. High efficiency fine particulate filtration using carbon nanotube coatings10.1002/adma.200400463 ↗
70. Carbon nanotube sheets for the use as artificial muscles10.1016/j.carbon.2003.12.044 ↗
71. Facile and scalable fabrication of well‐aligned and closely packed single‐walled carbon nanotube films on various substrates10.1002/adma.201000705 ↗
72. Mechanotunable microstructures of carbon nanotube networks10.1021/mz300422f ↗
73. Numerical simulation for bending modulus of carbon nanotubes and some explanations for experiment10.1016/S1359-8368(03)00084-2 ↗
74. A non-linear analysis of the bending modulus of carbon nanotubes with rippling deformations10.1016/j.compstruct.2004.07.009 ↗
75. A meshfree procedure for the microscopic analysis of particle-reinforced rubber compounds. Interact
76. Transparent, conductive carbon nanotube films10.1126/science.1101243 ↗
77. Mechanics of carbon nanotube networks: microstructural evolution and optimal design10.1039/c1sm06034a ↗
78. Carbon nanotubes with temperature-invariant viscoelasticity from–196 to 1000C10.1126/science.1194865 ↗
79. A comparative study of EMI shielding properties of carbon nanofiber and multi-walled carbon nanotube filled polymer composites10.1166/jnn.2005.115 ↗
80. Statistical geometry of random fibrous networks, revisited: waviness, dimensionality, and percolation10.1063/1.1763240 ↗
81. Strong, transparent, multifunctional, carbon nanotube sheets10.1126/science.1115311 ↗
82. Ultra-strong collagen-mimic carbon nanotube bundles10.1016/j.carbon.2014.06.020 ↗
83. Buckypaper-based catalytic electrodes for improving platinum utilization and PEMFC’s performance10.1016/j.electacta.2009.12.026 ↗