journal article·2016-11Open access

Dwell fatigue in two Ti alloys: An integrated crystal plasticity and discrete dislocation study

Zebang Zheng, Daniel S. Balint, Fionn P.E. Dunne

Abstract

It is a well known and important problem in the aircraft engine industry that alloy Ti-6242 shows a significant reduction in fatigue life, termed dwell debit, if a stress dwell is included in the fatigue cycle, whereas Ti-6246 does not; the mechanistic explanation for the differing dwell debit of these alloys has remained elusive for decades. In this work, crystal plasticity modelling has been utilised to extract the thermal activation energies for pinned dislocation escape for both Ti alloys based on independent experimental data. This then allows the markedly different cold creep responses of the two alloys to be captured accurately and demonstrates why the observed near-identical rate sensitivity under non-dwell loading is entirely consistent with the dwell behaviour. The activation energies determined are then utilised within a recently developed thermally-activated discrete dislocation plasticity model to predict the strain rate sensitivities of the two alloys associated with nano-indentation into basal and prism planes. It is shown that Ti-6242 experiences a strong crystallographic orientation-dependent rate sensitivity while Ti-6246 does not which is shown to agree with recently published independent measurements; the dependence of rate sensitivity on indentation slip plane is also well captured. The thermally-activated discrete dislocation plasticity model shows that the incorporation of a stress dwell in fatigue loading leads to remarkable stress redistribution from soft to hard grains in the classical cold dwell fatigue rogue grain combination in alloy Ti-6242, but that no such load shedding occurs in alloy Ti-6246. The key property controlling the behaviour is the time constant of the thermal activation process relative to that of the loading. This work provides the first mechanistic basis to explain why alloy Ti-6242 shows a dwell debit but Ti-6246 does not.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. On the rate sensitivity in discrete dislocation plasticity10.1016/j.mechmat.2015.01.009 ↗
2. Dwell fatigue crack nucleation model based on crystal plasticity finite element simulations of polycrystalline titanium alloys10.1016/j.jmps.2011.05.003 ↗
3. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions10.1016/S0142-1123(03)00145-2 ↗
4. Dwell sensitive fatigue in a near alpha titanium alloy at ambient temperature10.1016/S0142-1123(97)00020-0 ↗
5. Discrete dislocation plasticity analysis of the wedge indentation of films10.1016/j.jmps.2006.07.004 ↗
6. On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals
7. Dislocations and plastic flow in crystals10.1119/1.1933704 ↗
8. On the mechanisms of fatigue facet nucleation in titanium alloys10.1111/j.1460-2695.2008.01284.x ↗
9. Lengthscale-dependent, elastically anisotropic, physically-based hcp crystal plasticity: Application to cold-dwell fatigue in Ti alloys10.1016/j.ijplas.2006.10.013 ↗
10. A systematic study of hcp crystal orientation and morphology effects in polycrystal deformation and fatigue10.1098/rspa.2007.1833 ↗
11. Dwell-sensitive fatigue under biaxial loads in the near-alpha titanium alloy IMI68510.1016/0142-1123(94)90194-5 ↗
12. Deformation and damage mechanisms in an α/β 6242 Ti alloy in fatigue, dwell-fatigue and creep at room temperature. Influence of internal hydrogen10.1016/j.msea.2008.11.045 ↗
13. Thermodynamic analysis of dislocation glide controlled by dispersed local obstacles10.1016/0025-5416(69)90026-3 ↗
14. Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams10.1016/j.actamat.2009.07.064 ↗
15. A microcantilever investigation of size effect, solid-solution strengthening and second-phase strengthening for 〈a〉 prism slip in alpha-Ti10.1016/j.actamat.2011.06.005 ↗
16. Deformation and creep modeling in polycrystalline Ti–6Al alloys10.1016/S1359-6454(03)00289-1 ↗
17. Deformation compatibility in a single crystalline Ni superalloy
18. A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys10.1016/j.jallcom.2016.02.146 ↗
19. Local deformation mechanisms of two-phase Ti alloy10.1016/j.msea.2015.09.016 ↗
20. Local strain rate sensitivity of single α phase within a dual-phase Ti alloy10.1016/j.actamat.2016.01.057 ↗
21. A cold dwell fatigue crack nucleation criterion for polycrystalline Ti-6242 using grain-level crystal plasticity FE Model10.1016/j.ijfatigue.2008.05.026 ↗
22. Nucleation of cracks from shear-induced cavities in an α/β titanium alloy in fatigue, room-temperature creep and dwell-fatigue10.1016/j.actamat.2008.04.060 ↗
23. Lütjering · 2003
24. A micro-indentation study of superplasticity in Pb, Sn, and Sn-38wt% Pb10.1016/0001-6160(88)90319-7 ↗
25. Phenomenological and microstructural analysis of room temperature creep in titanium alloys10.1016/S1359-6454(99)00426-7 ↗
26. Crystal plasticity FE study of the effect of thermo-mechanical loading on fatigue crack nucleation in titanium alloys10.1111/ffe.12410 ↗
27. Fatigue crack growth rates in alpha titanium: Faceted vs. striation growth10.1016/j.scriptamat.2012.10.041 ↗
28. A simple model to account for the role of microtexture on fatigue and dwell fatigue lifetimes of titanium alloys10.1016/j.scriptamat.2013.10.024 ↗
29. Observations of facet formation in near-α titanium and comments on the role of hydrogen10.1007/s11661-010-0507-9 ↗
30. A comparative study on dwell fatigue of Ti–6Al–2Sn–4Zr–xMo (x=2 to 6) Alloys on a Microstructure-Normalized Basis10.1007/s11661-014-2541-5 ↗
31. Observations on the faceted initiation site in the dwell-fatigue tested ti-6242 alloy: Crystallographic orientation and size effects10.1007/s11661-006-0095-x ↗
32. The formation of cracks as a result of plastic flow10.1098/rspa.1954.0124 ↗
33. Room temperature deformation and mechanisms of slip transmission in oriented single-colony crystals of an α/β titanium alloy10.1016/S1359-6454(98)00364-4 ↗
34. Discrete dislocation plasticity: a simple planar model10.1088/0965-0393/3/5/008 ↗
35. Progress in structural materials for aerospace systems10.1016/j.actamat.2003.08.023 ↗
36. On rate-dependent polycrystal deformation: the temperature sensitivity of cold dwell fatigue
37. Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium10.1016/j.actamat.2016.07.044 ↗
38. Rate-sensitive behaviour of alpha-beta colony Ti
39. Rate sensitivity in discrete dislocation plasticity in hexagonal close-packed crystals10.1016/j.actamat.2016.01.035 ↗
40. The effects of regularity on the geometrical properties of Voronoi tessellations10.1016/j.physa.2014.03.012 ↗