journal article·2001-07

Crack front rotation and segmentation in mixed mode I+III or I+II+III. Part II: Comparison with experiments

Véronique Lazarus, Jean-Baptiste Leblond, Salah-Eddine Mouchrif

Publisher page

Abstract

Abstract Using the results presented in Part I, together with various criteria, we try to explain qualitatively and quantitatively crack front rotation and segmentation under mixed mode I+III or I+II+III conditions. We first give a qualitative explanation of segmentation in mode I+III, based on the energetic theory of fracture. However, a satisfactory quantitative interpretation would require knowledge of a parameter which theory is unable to predict and which is not provided in experimental reports. We then concentrate on crack front rotation. It is shown that a suitable energetic criterion is able to reproduce quantitatively crack front “rotation rates” observed in brittle fracture in mode I+III. In fatigue, a criterion considering the sole mode I stress intensity factor is found to be more appropriate. Finally, for fatigue in general mode I+II+III conditions, we show that the crack front rotation rate is again satisfactorily reproduced by the same criterion as before, and also that a suitable extension of the well-known principle of local symmetry allows satisfactory prediction of the mean kink angle.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Amestoy, M., 1987. Propagation de fissures en élasticité plane. Ph.D. Thesis, Université Pierre et Marie Curie, Paris.
2. Crack paths in plane situations — II: Detailed form of the expansion of the stress intensity factors10.1016/0020-7683(92)90210-K ↗
3. Fracture propagation paths under mixed mode loading within rectangular blocks of polymethyl methacrylate10.1029/95JB02507 ↗
4. Shear stress intensity factors for planar crack with slightly curved front10.1115/1.3171857 ↗
5. Brittle fracture of solids with arbitrary cracks10.1007/BF00155254 ↗
6. Fissuration par fatigue sous sollicitations polymodales (mode I ondulé + mode III permanent) d'un acier pour rotors 26 NCDV 14
7. Hubbard, S., 1995. Determining the fatigue threshold and crack propagation properties of a steel under mixed mode I and III loading. M.Sc. Dissertation, Sheffield University, Sheffield.
8. Lazarus, V., 1997. Quelques problèmes tridimensionnels de mécanique de la rupture fragile. Ph.D. Thesis, Université Pierre et Marie Curie, Paris.
9. Crack paths in plane situations — I: General form of the expansion of the stress intensity factors10.1016/0020-7683(89)90094-2 ↗
10. Crack paths in three-dimensional solids. I: Two-term expansion of the stress intensity factors — Application to crack path stability in hydraulic fracturing10.1016/S0020-7683(97)00276-X ↗
11. Palaniswamy, K., Knauss, W.-G., 1975. Crack extension in brittle solids. In: Mechanics Today, Vol. 4, Nemat-Nasser, S. (Ed.), Pergamon Press, New York, pp. 87–148.
12. Progress in understanding jointing over the past century10.1130/0016-7606(1988)100<1181:PIUJOT>2.3.CO;2 ↗
13. Formation and interpretation of dilatant echelon cracks10.1130/0016-7606(1982)93<1291:FAIODE>2.0.CO;2 ↗
14. First-order variation in elastic fields due to variation in location of a planar crack front10.1115/1.3169103 ↗
15. Formation of fracture “lances” in glass10.1016/0013-7944(69)90010-1 ↗
16. An analysis of non-planar crack growth under mixed mode loading10.1016/0020-7683(94)90205-4 ↗
17. Yates, J.R., Mohammed, R.A., 1994. Crack propagation under mixed mode (I+III) loading. Proceedings of the Fourth International Conference on Biaxial/Multiaxial Fatigue, Saint-Germain-en-Laye, France, Vol. II, pp. 99–106.