Shear instability of plastically-deforming metals in high-velocity impact welding
Source abstract
Abstract
High-speed oblique impact of two metal plates results in the development of an intense shear region at their interface leading to interfacial profile distortion and interatomic bonding. If the relative velocity is sufficient, a distinct wavy morphology with a well-defined amplitude and wavelength is observed. Emergence of this morphology below the melting point of the metal plates is usually taken as evidence of a successful weld. Amongvarious proposed mechanisms, instability owing to large tangential velocity variations near the interface has received significant attention. With one exception, the few quantitative stability analyses of this proposed mechanism have treated an anti-symmetric/shear-layer base profile (i.e., a Kelvin-Helmholtz configuration) and employed an inviscid or Newtonian viscous fluid constitutive relation. The former stipulation implies the energy source for the instability is the presumed relative shearing motion of the two plates, while the latter is appropriate only if melting occurs locally near the interface. In this study, these restrictions, which are at odds with the conditions realized in high-velocity impact welding, are relaxed. A quantitative temporal linear stability analysis is performed to investigate whether the interfacial wave morphology could be the signature of a shear-driven high strain-rate instability of a perfectly plastic material undergoing a jet-like deformation near the interface. The resulting partial differential eigenvalue problem is solved numerically using a spectral collocation method in which customized boundary conditions near the interface are implemented to properly treat the singularity arising from the vanishing of the base flow strain-rate at the symmetry plane of the jet. The solution of the eigenvalue problem yields the wavelength and growth rate of the dominant wave-like disturbances along the interface and confirms that a shear instability of a plastically-deforming material is compatible with the emergent wavy interfacial morphology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Permanent periodic surface deformations due to a traveling jet10.1115/1.3641777 ↗
2. The mechanics of wave formation in explosive welding
3. Interface phenomena in aluminium–magnesium magnetic pulse welding10.1179/174329308X300136 ↗
4. Boyd · 2001
5. Wave forming mechanisms in explosive welding10.4028/www.scientific.net/MSF.465-466.219 ↗
6. Mechanism of wave formation at the interface in explosive welding10.1007/BF02489134 ↗
7. Mechanism of bond zone wave formation in explosion-clad metals10.1007/BF02814967 ↗
8. Criminale · 2003
9. Deribas, A.A., Simonov, V.A., ZakcharenkoI, D., Investigation of explosive welding parameters for arbitrary combinations of metals and alloys. In: Proceedings of the 5th Int. Conf. on High Energy Rate Fabrication, 4, University of Denver, Denver, CO, 1975, pp. 1–4.
10. Drazin · 2002
11. El-Sobky, H., Blazynski, T.Z., Experimental investigation of the mechanics of explosive welding by means of a liquid analogue. In: Procceeding of 5th International Conference on “High Energy Rate fabrication”, Denver, Colorado, 1975, pp. 1–21.10.1002/mawe.19900210107 ↗
12. Faes, K., Baaten, T., De Waele, W., Debroux, N., Joining of Copper to Brass using magnetic pulse welding. In: Proceedings of the 4th International conference on High Speed Forming, Columbus, OH, 2010, pp. 84–96.
13. Wave formation in explosive welding10.1080/14786436808223020 ↗
14. On the transition from a waveless to a wavy Interface in explosive welding10.1016/0025-5416(87)90300-4 ↗
15. Kachanov · 2004
16. A mechanism of explosive bonding10.1007/BF02913429 ↗
17. Magnetic pulse welding by electromagnetic compression: determination of the impact velocity10.4028/www.scientific.net/AMR.966-967.489 ↗
18. Effect of explosive characteristics on the explosive welding of stainless steel to carbon steel in cylindrical configuration10.1016/j.matdes.2013.03.069 ↗
19. Numerical and experimental studies of the mechanism of the wavy interface formations in explosive/impact welding10.1016/j.jmps.2005.06.001 ↗
20. Analytical model and experimental validation of single turn, axi-symmetric coil for electromagnetic forming and welding10.1016/j.promfg.2015.09.070 ↗
21. Spatial stability analysis of emergent wavy interfacial patterns in magnetic pulsed welding10.1016/j.cirp.2014.03.023 ↗
22. Nassiri, A., Chini, G.P., Kinsey, B.L., Arbitrary Lagrangian Eulerian FEA method to predict wavy pattern and weldability window during magnetic pulsed welding, In: Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference, American Society of Mechanical Engineers, Charlotte, NC, 2015, pp. V001T02A100-V001T02A100.
23. Arbitrary Lagrangian-Eulerian finite element simulation and experimental investigation of wavy interfacial morphology during high velocity impact welding10.1016/j.matdes.2015.09.005 ↗
24. Nassiri · 2015 · 167
25. A discussion of the mechanism of interface wave generation in explosive welding10.1016/0020-7403(74)90014-9 ↗
26. The mechanics of wave formation in impact welding10.1080/14786437508226540 ↗
27. Shampine · 2003
28. Trefethen · 2000
29. Magnetic pulse welding: lessons to be learned from explosive welding
30. Vaporizing foil actuator: a tool for collision welding10.1016/j.jmatprotec.2013.07.006 ↗
31. Vivek, A., Taber, G., Demmerle, D., Daehn, Glenn, Effect of interchanging flyer sheet and target plate material on interface morphology during laser impact welding, 2015, Unpublished manuscript.
32. Wave formation between impacting liquids in explosive welding and erosion10.1038/226538b0 ↗
33. Wittman, R.H., The influence of collision parameters on the strength and microstructure of an explosion welded aluminum alloy. In: Proc. 2nd Sym. on Use of Explosive Energy in Manufacturing Metallic Materials of New Properties and Possibilities of Application thereof in the Chemical Industry, 1973, 153-168.
34. Application of high velocity impact welding at varied different length scales10.1016/j.jmatprotec.2010.01.001 ↗