journal article·2019-06

A viscoelastic model for hydrothermally activated malleable covalent network polymer and its application in shape memory analysis

Yiqi Mao, Fen Chen, Shujuan Hou, H. Jerry Qi, Kai Yu

Publisher page

Abstract

Abstract Covalently cross-linked network polymers are widely used in engineering applications due to the robust and irreversible nature of the covalent bonds. Recently proposed polyimine-based malleable covalent network polymers (MCNPs) show water or temperature induced shape reforming under low temperatures, which enables the green and energy neutral reprocessing and reshaping of the thermoset. The fundamental mechanisms for water/temperature triggered reforming are the water and temperature initiated bond exchange reaction (BER), which releases the stress in the macromolecular chains. In addition, the water-induced BER process is assisted by the configuration entropy change under a water diffusion-induced shift in the glass transition temperature. To set a theoretical foundation for the MCNPs-based structure design and engineering applications, a chemo-thermo-mechanically coupled 3D viscoelastic model is developed under a consistent thermodynamic framework. A field model of mass transportation is developed to couple the chemical potential, temperature, stress, and relaxation time in a polymer system. The material malleability is attributed to two main factors, i.e., water/temperature triggered BERs and the water diffusion induced “plasticization effects”, where BERs-caused stress release is characterized by a phase evolution model, while "plasticization effects" induced material relaxation is captured by the depression of relaxation time which depends on the inverse of the entropy increment. After calibration by a series of experiments, the model is applied to stress relaxation and isothermal uniaxial stretch analysis of MCNPs under humidity condition. Good agreement between experiment and simulation demonstrates the ability of the proposed model in capturing the coupled thermo-chemo-mechanical behaviors of the water/temperature malleable polymer. Moreover, experiments and simulations show the solvent-driven softening mechanism provides an alternative way to recover the fixed temporary configuration. However, for the current BERs featured MCNPs, the water triggered constantly network topology exchange release the stress, not allowing the sample to return to its original shape. This work provides understandings and design guidelines for the hydrothermal-activated malleable covalent network polymer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Advanced Polymer Synthesis and Characterization · Hydrogels: synthesis, properties, applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials10.1016/0022-5096(93)90013-6 ↗
2. Catalytic control of the Vitrimer glass transition10.1021/mz300239f ↗
3. A coupled theory of fluid permeation and large deformations for elastomeric materials10.1016/j.jmps.2010.07.020 ↗
4. A thermo-mechanically coupled theory for fluid permeation in elastomeric materials: application to thermally responsive gels10.1016/j.jmps.2011.07.005 ↗
5. A constitutive model for coupled fluid permeation and large viscoelastic deformation in polymeric gels10.1039/c2sm25372k ↗
6. Molecular interpretation of the glass transition temperature of polymer-diluent systems10.1021/ma60074a029 ↗
7. Silica-like malleable materials from permanent organic networks10.1126/science.1212648 ↗
8. Vinylogous urethane vitrimers10.1002/adfm.201404553 ↗
9. Configurational entropy approach to the Kinetics of glasses10.6028/jres.102.011 ↗
10. Molecular interpretation of glass temperature depression by plasticizers
11. Thermodynamics of high polymer solutions10.1063/1.1723621 ↗
12. Diffusion in polymer-diluent systems
13. Thermomechanical behavior of shape memory elastomeric composites10.1016/j.jmps.2011.09.011 ↗
14. A theory of coupled diffusion and large deformation in polymeric gels10.1016/j.jmps.2007.11.010 ↗
15. A phase-field model for systems with coupled large deformation and mass transport10.1016/j.jmps.2013.03.001 ↗
16. Water-driven programmable polyurethane shape memory polymer: demonstration and mechanism10.1063/1.1880448 ↗
17. Some properties of solutions of long-chain compounds10.1021/j150415a018 ↗
18. Reduced time as a unified parameter determining fixity and free recovery of shape memory polymers10.1038/ncomms4066 ↗
19. Constitutive modelling in finite thermoviscoplasticity: a physical approach based on nonlinear rheological models10.1016/S0749-6419(99)00038-8 ↗
20. Photomechanics of light-activated polymers10.1016/j.jmps.2009.03.003 ↗
21. Mechanics of soft active materials with phase evolution10.1016/j.ijplas.2009.10.005 ↗
22. Modeling the mechanics of covalently adaptable polymer networks with temperature-dependent bond exchange reactions10.1039/c3sm27945f ↗
23. A simulation method to analyze chemo-mechanical behavior of swelling-induced shape-memory polymer in response to solvent10.1002/app.34597 ↗
24. A phenomenological model for the chemo-responsive shape memory effect in amorphous polymers undergoing viscoelastic transition10.1088/0964-1726/22/11/115019 ↗
25. A phenomenological thermodynamic model for the chemo-responsive shape memory effect in polymers based on Flory–Huggins solution theory10.1039/C3PY01256E ↗
26. Transient analysis of swelling-induced large deformations in polymer gels10.1016/j.jmps.2012.07.010 ↗
27. A photoviscoplastic model for photoactivated covalent adaptive networks10.1016/j.jmps.2014.05.008 ↗
28. A continuum model for deformable, second gradient porous media partially saturated with compressible fluids10.1016/j.jmps.2013.06.009 ↗
29. Thermoviscoplastic behaviors of anisotropic shape memory elastomeric composites for cold programmed non-affine shape change10.1016/j.jmps.2015.09.003 ↗
30. Neogi · 1996 · 147
31. Heat- or water-driven malleability in a highly recyclable covalent network polymer10.1002/adma.201400317 ↗
32. Catalyst-free room-temperature self-healing elastomers based on aromatic disulfide metathesis10.1039/C3MH00061C ↗
33. Bond-controlled configurational entropy reduction in chemical vitrification10.1038/nature01261 ↗
34. Effect of heat-treatment on the density and constitution of high-silica glasses of the borosilicate type10.1111/j.1151-2916.1948.tb14287.x ↗
35. Relation between inelastic deformability of thermal expansion of glass in its annealing range10.1111/j.1151-2916.1946.tb11592.x ↗
36. Diffusion in polymer—solvent systems. I. Reexamination of the free-volume theory10.1002/pol.1977.180150302 ↗
37. Wang · 2012
38. A 3D finite deformation constitutive model for amorphous shape memory polymers: a multi-branch modeling approach for nonequilibrium relaxation processes10.1016/j.mechmat.2011.09.004 ↗
39. Temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids
40. Using the dynamic bond to access macroscopically responsive structurally dynamic polymers10.1038/nmat2891 ↗
41. Modeling the glass transition of amorphous networks for shape-memory behavior10.1016/j.jmps.2013.02.005 ↗
42. Modeling the solvent-induced shape-memory behavior of glassy polymers10.1039/c3sm51210j ↗
43. Solvent-driven temperature memory and multiple shape memory effects10.1039/C5SM00543D ↗
44. Making insoluble polymer networks malleable via olefin metathesis10.1021/ja303356z ↗
45. Mechanisms of multi-shape memory effects and associated energy release in shape memory polymers10.1039/c2sm25292a ↗
46. A thermomechanical constitutive model for an epoxy based shape memory polymer and its parameter identifications10.1007/s11043-014-9237-5 ↗
47. Reprocessing and recycling of thermosetting polymers based on bond exchange reactions10.1039/C3RA47438K ↗
48. A finite element method for transient analysis of concurrent large deformation and mass transport in gels
49. Predicting Polymer/Solvent Diffusion Coefficients Using Free-Volume Theory10.1002/aic.690380309 ↗