The effect of loading rate on ductile fracture toughness and fracture surface roughness
Source abstract
Abstract
Abstract The variation of ductile crack growth resistance and fracture surface roughness with loading rate is modeled under mode I plane strain, small scale yielding conditions. Three-dimensional calculations are carried out using an elastic–viscoplastic constitutive relation for a progressively cavitating solid with two populations of void nucleating second phase particles. Larger inclusions that result in void nucleation at an early stage are modeled as discrete void nucleation sites while smaller particles that require large strains to nucleate voids are homogeneously distributed. The calculations are carried out for two values of density of the larger inclusions, 3.6% and 7.1%, and for prescribed loading rates K I ranging from 1 × 10 5 MPa m s − 1 to 5 × 10 7 MPa m s − 1 . The ductile fracture mode is found to undergo a transition from one that can be regarded as growth of a dominant main crack at the lower loading rates to one dominated by damage nucleation and micro-cracking ahead of the main crack at the higher loading rates. The values of JIC, the tearing modulus, TR, the total plastic dissipation and the plastic dissipation in the fracture process region are all found to increase with increasing loading rate. However, the ratio of plastic dissipation in the fracture process region to total plastic dissipation decreases with increasing prescribed loading rate. The fracture surfaces are found to display two self-affine regimes, with a Hurst exponent β ≈ 0.60 at small length scales and with β ≈ 0.45 at larger length scales. The multi-fractal spectra indicate multi-affine behavior in most cases but a range of loading rates and length scales exhibiting mono-affine behavior is also found. Parameters characterizing the fracture surface statistics, including the length scale at which a transition from a power law tail to an exponential tail occurs, are related to the mode of crack growth/damage accumulation. A linear relation is found between the values of JIC and TR and the saturation value of the correlation function of the surface roughness for K I 3 × 10 7 MPa m s − 1 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Scattered data interpolation methods for electronic imaging systems: a survey10.1117/1.1455013 ↗
2. ASTM E1820-11, 2011. Standard Test Method for Measurement of Fracture Toughness. ASTM International.
3. Ductile fracture by void growth to coalescence10.1016/S0065-2156(10)44003-X ↗
4. Failure of heterogeneous materials: a dynamic phase transition?10.1016/j.physrep.2010.07.006 ↗
5. Scaling properties of cracks
6. Borak, S., Hardle, W., Weron, R., 2005. Stable Distributions. SFB 649 Discussion Paper 008, 1–28.10.2139/ssrn.2894444 ↗
7. Broberg, K.B., 1982. The foundations of fracture mechanics, Eng. Fract. Mech. 16, 497–515.10.1016/0013-7944(82)90129-1 ↗
8. Void nucleation effects in biaxially stretched sheets10.1115/1.3224807 ↗
9. Gurson, A.L., 1975. Plastic Flow and Fracture Behavior of Ductile Materials Incorporating Void Nucleation, Growth and Interaction (Ph.D. thesis), Brown University, Providence, RI.
10. Tail behavior, modes and other characteristics of stable distributions10.1023/A:1009908026279 ↗
11. Understanding fast macroscale fracture from microcrack post mortem pattern10.1073/pnas.1113205109 ↗
12. Effects of microscale inertia on dynamic ductile crack growth10.1016/j.jmps.2011.12.010 ↗
13. Process region influence on energy release rate and crack tip velocity during rapid crack propagation10.1007/BF00012457 ↗
14. Fracture behavior under high rates of loading10.1016/0013-7944(86)90193-1 ↗
15. An iterative procedure for the estimation of the parameters of stable laws10.1080/03610918108812189 ↗
16. Lèvy · 1925
17. Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models10.1016/S0749-6419(02)00008-6 ↗
18. MATLAB Release 2012b. The MathWorks, Inc., Natick, Massachusetts, United States.
19. Simple consistent estimators of stable distribution parameters10.1080/03610918608812563 ↗
20. Transient damage spreading and anomalous scaling in mortar crack surface10.1103/PhysRevE.78.016112 ↗
21. Material rate dependence and mesh sensitivity in localization problems10.1016/0045-7825(88)90069-2 ↗
22. Analysis of tensile decohesion along an interface10.1016/0022-5096(90)90001-K ↗
23. Mesh effects in the analysis of dynamic ductile crack growth10.1016/0013-7944(94)90239-9 ↗
24. Prediction of ductile fracture surface roughness scaling10.1115/1.4005959 ↗
25. Grain boundary crack growth in metastable titanium β alloys10.1016/j.actamat.2014.08.062 ↗
26. Experimental determination of dynamic crack initiation and propagation fracture toughness in thin aluminum sheets10.1023/A:1007439301360 ↗
27. Localization of deformation in rate sensitive porous plastic solids10.1007/BF00942345 ↗
28. Paris, P.C., Tada, H., Zahoor, A., Ernst, H., 1979. The theory of instability of the tearing modes in elastic–plastic crack growth. In: Landes, J.D., Begley, J.A., Clarke, G.A. (Eds.), Elastic–Plastic Fracture, ASTM STP 668, American Society for Testing and Materials, Philadelphia, PA, pp. 5–36.10.1520/STP35825S ↗
29. Statistics of ductile fracture surfaces: the effect of material parameters10.1007/s10704-013-9846-z ↗
30. Ponson, L., Srivastava, A., Osovski, S., Bouchaud, E., Tvergaard, V., Needleman, A., 2014. Correlating toughness and roughness in ductile fracture, submitted for publication.
31. An experimental investigation into dynamic fracture. I. Crack initiation and crack arrest10.1007/BF00963460 ↗
32. A path-independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
33. An investigation of dynamic crack initiation in PMMA10.1016/0167-6636(96)00014-2 ↗
34. A numerical study of dynamic crack growth in elastic–plastic solids10.1016/S0020-7683(96)00062-5 ↗
35. Siegmund, T., Brocks, W., 2000. The role of cohesive strength and separation energy for modeling of ductile fracture. In: Jernina, K.L., Paris, P.C. (Eds.), Fatigue and Fracture Mechanics, vol. 30. ASTM STP 1360, pp. 139–151.10.1520/STP13400S ↗
36. Effect of inclusion density on ductile fracture toughness and roughness10.1016/j.jmps.2013.10.003 ↗
37. Influence of voids on shear band instabilities under plane strain conditions10.1007/BF00036191 ↗
38. On localization in ductile materials containing spherical voids10.1007/BF00015686 ↗
39. Material failure by void growth to coalescence10.1016/S0065-2156(08)70195-9 ↗
40. The relation between crack growth resistance and fracture process parameters in elastic–plastic solids10.1016/0022-5096(92)90020-3 ↗
41. Analysis of the cup-cone fracture in a round tensile bar10.1016/0001-6160(84)90213-X ↗
42. Vernède, S., Ponson, L., Bouchaud, J.P., 2014. Turbulent fracture surfaces: a footprint of damage percolation, in preparation.10.1103/PhysRevLett.114.215501 ↗
43. Finite element simulations of shear localization in plate impact10.1016/0022-5096(94)90026-4 ↗