journal article·2014-12Open access

Subgrain lath martensite mechanics: A numerical–experimental analysis

F. Maresca, V.G. Kouznetsova, M.G.D. Geers

Abstract

Lath martensite reveals a specific hierarchical subgrain structure, with laths, blocks and packets of particular crystallography. The presence of interlath retained austenite layers has been reported in the literature. This paper investigates the potential influence of the interlath retained austenite on the mechanical behaviour of lath martensite subgrains. To this purpose, a martensite grain substructure is modelled using a crystal plasticity framework, with a BCC lath - FCC austenite bicrystal at the fine scale. The main novel contribution of this work is the validation of the hypothesis on the role of the interlath retained austenite in lath martensite using the experimental results reported in the literature. The main features of the experimentally observed deformation behaviour (stress-strain curve, slip activity and roughness pattern) are qualitatively well reproduced by the model. It is shown that the presence of austenite interlath films has the potential to remarkably enhance the local deformation of martensite. In spite of its minor volume fraction, it plays a major role in the orientation dependent mechanical behaviour of the aggregate. It is also shown that if the presence of interlath austenite is neglected, the observed experimental flow curves are not captured.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Tempering of martensite in Dual-Phase steels and its effects on softening behavior10.1007/s11661-011-0739-3 ↗
2. Bhadeshia, H.K.D.H., 1979. The Theory and Significance of Retained Austenite in Steels (Ph.D. thesis). University of Cambridge.
3. Polycrystalline plasticity and the evolution of crystallographic texture in FCC metals10.1098/rsta.1992.0111 ↗
4. The dependence of some tensile and fatigue properties of a dual-phase steel on its microstructure10.1007/BF02658673 ↗
5. Kinetics of dislocations in pure Fe. Part I. in situ straining experiments at room temperature10.1016/j.actamat.2010.02.023 ↗
6. Effect of grain refinement to 1μm on strength and toughness of dual-phase steels10.1016/j.msea.2010.08.062 ↗
7. Non-Schmid effects and localized plastic flow in intermetallic alloys10.1016/0921-5093(93)90376-P ↗
8. Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels10.1007/s11661-008-9609-z ↗
9. On the measurement of the nanohardness of the constitutive phases of TRIP-assisted multiphase steels10.1016/S0921-5093(01)01689-6 ↗
10. Local plastic strain evolution in a high strength dual-phase steel10.1016/j.msea.2010.04.052 ↗
11. Microscale-calibrated modeling of the deformation response of low-carbon martensite10.1016/j.actamat.2013.02.051 ↗
12. Multiscale modeling of plastic deformation of molybdenum and tungsten10.1016/j.actamat.2008.07.037 ↗
13. On coherent transformations in steel10.1016/j.actamat.2004.08.011 ↗
14. Dislocation density crystalline plasticity modeling of lath martensitic microstructures in steel alloys10.1080/14786430903185999 ↗
15. Bounds and self-consistent estimates for creep of polycrystalline materials10.1098/rspa.1976.0027 ↗
16. Multiscale mechanics of TRIP-assisted multiphase steels10.1016/j.actamat.2007.02.029 ↗
17. Microstructural evolution during tempering of a multiphase steel containing retained austenite10.1016/S0921-5093(98)01081-8 ↗
18. Effects of morphology on the mechanical behavior of a dual phase Fe/2Si/0.1C Steel10.1007/BF02648546 ↗
19. Microstructure of low C steel isothermally transformed in the Ms to Mf temperature range10.1007/s11661-012-1338-7 ↗
20. A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels10.1016/0001-6160(59)90170-1 ↗
21. The formation of austenite in a low-alloy steel10.1007/BF02700436 ↗
22. Mechanical properties and microstructural features of AISI 4340 high-strength alloy steel under quenched and tempered conditions10.1016/S0924-0136(98)00351-3 ↗
23. On the role of interlath retained austenite in the deformation of lath martensite10.1088/0965-0393/22/4/045011 ↗
24. Relationship between local deformation behavior and crystallographic features of as-quenched lath martensite during uniaxial tensile deformation10.1016/j.actamat.2009.06.021 ↗
25. Micro-tension behaviour of lath martensite structures of carbon steel10.1016/j.msea.2012.09.099 ↗
26. The morphology and crystallography of lath martensite in Fe-C alloys10.1016/S1359-6454(02)00577-3 ↗
27. Effect of austenite grain size on the morphology and crystallography of lath martensite in low carbon steels10.2355/isijinternational.45.91 ↗
28. The morphology and crystallography of lath martensite in alloy steels10.1016/j.actamat.2006.07.009 ↗
29. Carbon enrichment in retained austenite films in low carbon lath martensite steel10.2355/isijinternational.51.1200 ↗
30. Effect of retained austenite on the microstructure and mechanical properties of martensitic precipitation hardening stainless steel10.1023/A:1004626907367 ↗
31. in situ observations and crystallographic analysis of martensitic transformation in steel10.1016/j.actamat.2013.04.065 ↗
32. Microstructure-hardness relationship in the fusion zone of TRIP steel welds10.1016/j.msea.2012.04.096 ↗
33. Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries10.1016/j.actamat.2013.06.055 ↗
34. Influence of cooling rate on the microstructure and retained austenite in an intercritically annealed vanadium containing HSLA steel10.1007/BF02645933 ↗
36. Effect of dual-phase treatment and tempering on the microstructure and mechanical properties of a high strength, low alloy steel10.1016/0025-5416(85)90177-6 ↗
37. Peculiarity of structure and crystallography of plastic deformation of lath martensite in structural steels10.1016/S0921-5093(99)00323-8 ↗
38. Why anomalous slip in body-centred cubic metals?10.1016/S0921-5093(01)00958-3 ↗
39. On the processing of martensitic steels in continuous galvanizing lines10.1007/s11661-011-0791-z ↗
40. Void formation during tensile testing of dual phase steels10.1007/BF02649272 ↗
41. Predicting failure modes and ductility of dual phase steels using plastic strain localization10.1016/j.ijplas.2008.12.012 ↗
42. Transformation-induced plasticity in ferrous alloys10.1016/j.jmps.2005.03.004 ↗
43. Modelling of damage and failure in multiphase high strength DP and TRIP steels10.1016/j.engfracmech.2010.08.017 ↗
44. Effect of composition on kinetics of athermal martensite formation in plain carbon steels10.1179/174328408X365838 ↗
45. BCC single crystal plasticity modeling and its experimental identification10.1088/0965-0393/16/8/085007 ↗