journal article·2018-07Open access

Stress evolution in elastic-plastic electrodes during electrochemical processes: A numerical method and its applications

Jici Wen, Yujie Wei, Yang-Tse Cheng

Abstract

Abstract Monitoring in real time the stress state in high capacity electrodes during charge-discharge processes is pivotal to the performance assessment and structural optimization of advanced batteries. The wafer curvature measurement technique broadly employed in thin-film industry, together with stress analysis using the Stoney equation, has been successfully adopted to measure in situ the stress in thin film electrodes. How large plastic deformation or interfacial delamination during electrochemical cycles in such electrodes affects the applicability of Stoney equation remains unclear. Here we develop a robust electrochemical-mechanical coupled numerical procedure to investigate the influence of large plastic deformation and interfacial failure on the measured stress in thin film electrodes. We identify how the constitutive behavior of electrode materials and film-substrate interfacial properties affect the measured stress-capacity curves of electrodes, and hence establish the relationship of electrode material parameters with the characteristics of stress-capacity curves. Using Li-ions batteries as examples, we show that plastic deformation and interfacial delamination account for the asymmetric stress-capacity loops seen in in situ stress measurements. The methods used here, along with the finite-element code in the supplementary material, may be used to model the electrode behavior as a function of the state of charge.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · High voltage insulation and dielectric phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. ABAQUS/Standard, 2013. SIMULIA, Providence, RI.
2. A Cahn–Hilliard-type theory for species diffusion coupled with large elastic–plastic deformations10.1016/j.jmps.2012.08.001 ↗
3. Analytical model of transient compressive stress evolution during growth of high diffusivity thin films on substrates10.1080/14786431003773007 ↗
4. All-solid lithium electrodes with mixed-conductor matrix10.1149/1.2127495 ↗
5. Amorphous silicon as a possible anode material for Li-ion batteries10.1016/S0378-7753(99)00194-9 ↗
6. A finite strain model of stress, diffusion, plastic flow, and electrochemical reactions in a lithium-ion half-cell10.1016/j.jmps.2011.01.003 ↗
7. Calculated elastic constants for stress problems associated with semiconductor devices10.1063/1.1661935 ↗
8. Cyclic plasticity and shakedown in high-capacity electrodes of lithium-ion batteries10.1016/j.ijsolstr.2012.12.019 ↗
9. Computational modeling of impact damage in brittle materials10.1016/0020-7683(95)00255-3 ↗
10. Carslaw · 1959 · vol. 2 · 8
11. High-performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
12. Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation10.1016/j.jpowsour.2009.01.021 ↗
13. A finite element implementation of a coupled diffusion-deformation theory for elastomeric gels10.1016/j.ijsolstr.2014.08.015 ↗
14. Crisfield · 1997
15. Brittle versus ductile fracture mechanism transition in amorphous lithiated silicon: from intrinsic nanoscale cavitation to shear banding10.1016/j.nanoen.2015.10.002 ↗
16. A Cahn–Hilliard-type phase-field theory for species diffusion coupled with large elastic deformations: application to phase-separating Li-ion electrode materials10.1016/j.jmps.2014.05.001 ↗
17. Theory on bending in cantilever beams with adsorbed islands10.1115/1.4036819 ↗
18. Mechanical properties of amorphous LixSi alloys: a reactive force field study10.1088/0965-0393/21/7/074002 ↗
19. Method to deduce the critical size for interfacial delamination of patterned electrode structures and application to lithiation of thin-film silicon islands10.1016/j.jpowsour.2012.01.097 ↗
20. Shape evolution of patterned amorphous and polycrystalline silicon microarray thin film electrodes caused by lithium insertion and extraction10.1016/j.jpowsour.2012.04.105 ↗
21. Lithium alloy negative electrodes10.1016/S0378-7753(99)00124-X ↗
22. Hughes · 1998
23. Numerical implementation of constitutive models: rate-independent deviatoric plasticity
24. Intrinsic stress mitigation via elastic softening during two-step electrochemical lithiation of amorphous silicon10.1016/j.jmps.2016.03.014 ↗
25. Modeling crack growth during Li extraction in storage particles using a fracture phase field approach10.1149/2.0281602jes ↗
26. Silicon-based materials as high capacity anodes for next generation lithium ion batteries10.1016/j.jpowsour.2014.05.096 ↗
27. Anisotropic compositional expansion in elastoplastic materials and corresponding chemical potential: Large-strain formulation and application to amorphous lithiated silicon10.1016/j.jmps.2014.04.012 ↗
28. Physical chemistry of some microstructural phenomena10.1007/BF02661808 ↗
29. Interfacial properties of the a-Si/Cu: active-inactive thin-film anode system for lithium-ion batteries10.1149/1.2184753 ↗
30. Finite-element formulations for problems of large elastic-plastic deformation10.1016/0020-7683(75)90033-5 ↗
31. An analysis of decohesion along an imperfect interface10.1007/978-94-017-2444-9_2 ↗
32. Effects of stress on lithium transport in amorphous silicon electrodes for lithium-ion batteries10.1016/j.nanoen.2015.02.020 ↗
33. On the influence of interfacial properties to the bending rigidity of layered structures10.1016/j.jmps.2016.04.005 ↗
34. Measurements of stress and fracture in germanium electrodes of lithium-ion batteries during electrochemical lithiation and delithiation10.1016/j.jpowsour.2015.11.036 ↗
35. Measurements of the fracture energy of lithiated silicon electrodes of Li-ion batteries10.1021/nl403197m ↗
36. In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation10.1016/j.jpowsour.2010.02.013 ↗
37. In situ measurement of biaxial modulus of Si anode for Li-ion batteries10.1016/j.elecom.2010.09.008 ↗
38. Real-time stress measurements in lithium-ion battery negative –electrodes10.1016/j.jpowsour.2012.01.036 ↗
39. Elastic softening of amorphous and crystalline Li–Si phases with increasing Li concentration: a first-principles study10.1016/j.jpowsour.2010.04.044 ↗
40. Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries10.1038/ncomms11886 ↗
41. Stress mitigation during the lithiation of patterned amorphous Si islands10.1149/2.048201jes ↗
42. Diffusion mediated lithiation stresses in Si thin film electrodes10.1149/2.009209jes ↗
43. The tension of metallic films deposited by electrolysis
44. Li segregation induces structure and strength changes at the amorphous Si/Cu interface10.1021/nl402353k ↗
45. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
46. A practical strain-hardening function
47. High damage tolerance of electrochemically lithiated silicon10.1038/ncomms9417 ↗
48. Grain-boundary sliding and separation in polycrystalline metals: application to nanocrystalline fcc metals10.1016/j.jmps.2004.04.006 ↗
49. A stochastic description on the traction-separation law of an interface with non-covalent bonding10.1016/j.jmps.2014.05.014 ↗
50. Analytical model and molecular dynamics simulations of the size dependence of flow stress in amorphous intermetallic nanowires at temperatures near the glass transition10.1103/PhysRevB.81.125402 ↗
51. Examining the validity of Stoney-equation for in-situ stress measurements in thin film electrodes using a large-deformation finite-element procedure10.1016/j.jpowsour.2018.03.052 ↗
52. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
53. Numerical simulations of fast crack growth in brittle solids10.1016/0022-5096(94)90003-5 ↗
54. Interaction between diffusion and chemical stresses10.1016/j.msea.2005.05.117 ↗
55. A chemo-mechanical model of lithiation in silicon10.1016/j.jmps.2014.06.004 ↗
56. Failure mechanism of 2D silicon film anodes: in-situ observations and simulations on crack evolution
57. A variational framework to model diffusion induced large plastic deformation and phase field fracture during initial two-phase lithiation of silicon electrodes10.1016/j.cma.2016.05.007 ↗
58. Intercalation-induced stress and heat generation within single lithium-ion battery cathode particles10.1149/1.2926617 ↗
59. Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles10.1149/1.2759840 ↗
60. Geometric design of micron-sized crystalline silicon anodes through in situ observation of deformation and fracture behaviors10.1039/C7TA02527K ↗
61. Inelastic hosts as electrodes for high-capacity lithium-ion batteries10.1063/1.3525990 ↗
62. Reactive flow in silicon electrodes assisted by the insertion of lithium10.1021/nl302261w ↗