journal article·2020-06

Dynamic plastic deformation and failure mechanisms of individual microcapsule and its polymeric composites

Xin Zhang, Pengfei Wang, Dawei Sun, Xin Li, Jinliang An, T.X. Yu, En-Hua Yang, Jinglei Yang

Publisher page

Abstract

Abstract Functional materials are widely used by introducing functional microcapsules in the matrix. The individual microcapsule can be regarded as core-shell structure in micro-level. In this study, mechanical performance of individual microcapsule with different shell types (PUF, silica, and nickel) and corresponding microcapsule-modified polymers under quasi-static as well as dynamic compressions are studied experimentally and numerically. Results show that the strength of the nickel shell-based microcapsule is two orders higher than that of the other two microcapsules at different strain rates. More cracks and fragments are observed in microcapsule subject to dynamic loading, which indicates higher energy dissipation under impact. The inclusion of nickel shell-based microcapsule does not cause strength reduction of the resulting microcapsule-modified polymer at all strain rates, while the use of PUF and silica shell-based microcapsules lead to significant reduction of the composites strengths. Nickel shell-based microcapsule-modified polymer shows high strain rate sensitivity than the other two microcapsule-modified polymers. Furthermore, nickel shell-based microcapsule-modified polymer shows distinct failure modes when compared to the PUF and the silica shell-based microcapsule-modified polymers. While matrix cracks tend to penetrate through the weak PUF and silica shell-based microcapsules, they often propagate along the nickel shell-based microcapsule/epoxy matrix interface due to a much higher strength of the nickel shell-based microcapsule. After debonding, sliding of the fracture surfaces may lead to the final fracture of some weaker Ni microcapsules in the nickel shell-based microcapsule-modified polymer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Mechanical Behavior of Composites · Silicone and Siloxane Chemistry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Plasticity and damage in aluminum syntactic foams deformed under dynamic and quasi-static conditions10.1016/j.msea.2004.09.012 ↗
2. Collision and rebound of ping pong balls on a rigid target10.1016/j.matdes.2015.08.019 ↗
3. Experimental characterization of concrete in dynamic tension10.1016/j.mechmat.2005.06.004 ↗
4. Fracture testing of a self-healing polymer composite10.1007/BF02412141 ↗
5. Effect of formulation of alginate beads on their mechanical behavior and stiffness10.1016/j.partic.2010.12.002 ↗
6. Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete10.1016/j.conbuildmat.2013.05.063 ↗
7. A new coupled thermomechanical framework for modeling formability in transformation induced plasticity steels10.1016/j.ijplas.2017.12.008 ↗
8. The role of dislocation walls for nanoindentation to shallow depths10.1016/j.ijplas.2008.02.003 ↗
9. Impact behavior of hollow balls10.1119/1.4839055 ↗
10. A general strength distribution function for brittle materials10.1016/0955-2219(92)90021-5 ↗
11. Effect of acid-base properties of unsized and sized carbon fibers on fiber/epoxy matrix adhesion10.1016/S0927-7757(99)00400-8 ↗
12. Highly durable and thermal-conductive shell-coated phase change capsule as a thermal energy battery10.1021/acsami.9b18627 ↗
13. Determination and interpretation of statistics of spatially resolved waveforms in spalled tantalum from 7 to 13 GPa10.1016/j.ijplas.2008.12.007 ↗
14. Detachment of an elastic matrix from a rigid spherical inclusion10.1007/BF00550559 ↗
15. Superhard silicon nanospheres10.1016/S0022-5096(03)00018-8 ↗
16. Dynamic failure of titanium: temperature rise and adiabatic shear band formation10.1016/j.jmps.2019.01.014 ↗
17. Tensile properties of glass microballoon-epoxy resin syntactic foams10.1002/app.23548 ↗
18. High strain rate compressive response of syntactic foams: trends in mechanical properties and failure mechanisms10.1016/j.msea.2011.06.073 ↗
19. Size effect on the compression breakage strengths of glass particles10.1016/j.powtec.2014.08.037 ↗
20. X-ray microtomography and finite element modelling of compressive failure mechanism in cenosphere epoxy syntactic foams10.1016/j.compstruct.2015.12.040 ↗
21. Fracture and fatigue response of a self-healing epoxy adhesive10.1016/j.polymer.2011.02.011 ↗
22. Mechanical properties of microcapsules used in a self-healing polymer10.1007/s11340-006-9659-3 ↗
23. Investigation of mechanical properties of soft hydrogel microcapsules in relation to protein delivery using a mems force sensor10.1002/jbm.a.32338 ↗
24. Numerical modeling of trip steel in axial crashworthiness10.1016/j.ijplas.2016.05.010 ↗
25. Finite element modelling of the mechanism of deformation and failure in metallic thin-walled hollow spheres under dynamic compression10.1016/j.mechmat.2012.06.002 ↗
26. Strain rate dependent compressive properties of glass microballoon epoxy syntactic foams10.1016/j.msea.2009.02.015 ↗
27. Robust self-healing concrete for sustainable infrastructure10.3151/jact.10.207 ↗
28. Preparation and properties of melamine urea-formaldehyde microcapsules for self-healing of cementitious materials
29. Estimation of effective elastic properties and interface stress concentrations in particulate composites by unit cell methods10.1016/j.actamat.2003.11.010 ↗
30. Determination of the failure stresses for fluid-filled microcapsules that rupture near the elastic regime10.1007/s11340-012-9605-5 ↗
31. Analyzing the effect of fiber reinforcement on properties of syntactic foams10.1016/j.msea.2010.06.077 ↗
32. Adhesion improvement of epoxy molding compound - Pd Preplated leadframe interface using shaped nickel layers10.1016/j.microrel.2011.07.095 ↗
33. Silica-shell/oil-core microcapsules with controlled shell thickness and their breakage stress10.1021/la9006229 ↗
34. Polymers with autonomous life-cycle control10.1038/nature21002 ↗
35. Contact and compression of elastic spherical shells: the physics of a 'Ping-Pong' ball
36. Compression testing spherical particles for strength: theory of the meridian crack test and implementation for microscopic fused quartz10.1016/j.jmps.2016.11.009 ↗
37. Density, viscosity, speed of sound, bulk modulus, surface tension, and flash point of binary mixtures of butylbenzene plus linear alkanes (n-Decane, n-Dodecane, n-Tetradecane, n-Hexadecane, or n-Heptadecane) at 0.1 MPa10.1021/acs.jced.6b00542 ↗
38. On the theory of thin elastic shells
39. Effect of microcapsule size on the performance of self-healing polymers10.1016/j.polymer.2007.04.008 ↗
40. Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid–liquid microPCM for thermal energy storage10.1016/j.apenergy.2009.10.011 ↗
41. Attrition of brittle spheres by fracture under compression and impact loading10.1016/0032-5910(93)80037-B ↗
42. Experimental probability estimators for weibull plots10.1007/BF01729379 ↗
43. Robust metallic microcapsules: a direct path to new multifunctional materials10.1021/acsami.9b00827 ↗
44. A modified weibull model for tensile strength distribution of carbon nanotube fibers with strain rate and size effects
45. Quasi-static uni-axial compression behaviour of hollow glass microspheres/epoxy based syntactic foams10.1016/j.matdes.2011.04.058 ↗
46. Vandegaer · 2012
47. Revisiting statistical size effects on compressive failure of heterogeneous materials, with a special focus on concrete10.1016/j.jmps.2018.07.022 ↗
48. Twist induced plasticity and failure mechanism of helical carbon nanotube fibers under different strain rates10.1016/j.ijplas.2018.06.007 ↗
49. Strengthening and failure mechanisms of individual carbon nanotube fibers under dynamic tensile loading10.1016/j.carbon.2016.02.009 ↗
50. Autonomic healing of polymer composites10.1038/35057232 ↗
51. Distribution of the mechanical strength of solid catalysts10.1205/cherd05015 ↗
52. Mechanical strength of solid catalysts: recent developments and future prospects10.1002/aic.11291 ↗
53. Robust microcapsules with polyurea/silica hybrid shell for one-part self-healing anticorrosion coatings10.1039/C4TA01312C ↗
54. The impact properties and damage tolerance and of bi-directionally reinforced fiber metal laminates10.1007/s10853-006-0014-y ↗
55. A study of the interaction between a guardrail post and soil during quasi-static and dynamic loading10.1016/j.ijimpeng.2006.04.004 ↗
56. Biochemomechanical poroelastic theory of avascular tumor growth10.1016/j.jmps.2016.05.011 ↗
57. Effect of lay-up orientation on ballistic impact behaviors of glare 5 FML beams10.1016/j.ijimpeng.2012.10.007 ↗
58. Microencapsulation of isocyanates for self-healing polymers10.1021/ma801718v ↗
59. Self-healing epoxy composites - Preparation and effect of the healant consisting of microencapsulated epoxy and latent curing agent10.1016/j.compscitech.2006.07.028 ↗
60. Experimental study and numerical prediction of tensile strength properties and failure modes of hollow spheres filled syntactic foams10.1016/j.commatsci.2012.06.024 ↗
61. Structure and properties of urea-formaldehyde resin/polyurethane blend prepared via in-situ polymerization10.1039/C5RA06029J ↗
62. Self-healing polymeric materials using epoxy/mercaptan as the healant10.1021/ma800028d ↗
63. Tuning the mechanical properties of silica microcapsules10.1039/c0cp00871k ↗
64. Rate dependent behaviors of nickel-based microcapsules
65. The effect of strain rate and filler volume fraction on the mechanical properties of hollow glass microsphere modified polymer10.1016/j.compositesb.2016.06.079 ↗