journal article·2019-05Open access

Configurational stability of a crack propagating in a material with mode-dependent fracture energy - Part I: Mixed-mode I+III

Jean-Baptiste Leblond, Alain Karma, Laurent Ponson, Aditya Vasudevan

Abstract

In a previous paper (Leblond et al., 2011), we proposed a theoretical interpretation of the experimentally well known instability of coplanar crack propagation in mode I+III. The interpretation relied on a stability analysis based on analytical expressions of the stress intensity factors for a crack slightly perturbed both within and out of its original plane, due to Gao and Rice (1986) and Movchan et al. (1998), coupled with a double propagation criterion combining Griffith's energetic condition and principle of local symmetry. Under such assumptions instability modes were indeed evidenced for values of the mode mixity ratio of the mode III to mode I stress intensity factors applied remotely larger than some threshold depending only on Poisson's ratio. Unfortunately, the predicted thresholds were much larger than those generally observed for typical values of this material parameter. While the subcritical character of the nonlinear bifurcation from coplanar to fragmented fronts has been proposed as a possible explanation for this discrepancy (Chen et al., 2015), we propose here an alternative explanation based on the introduction of a constitutive relationship between the fracture energy and the mode mixity ratio, which is motivated by experimental observations. By reexamining the linear stability analysis of a planar propagating front, we show that such a relationship suffices, provided that it is strong enough, to lower significantly the threshold value of the mode mixity ratio for instability so as to bring it in a range more consistent with experiments. Interesting formulae are also derived for the distributions of the perturbed stress intensity factors and energy release rate, in the special case of perturbations of the crack surface and front obeying the principle of local symmetry and having reached a stationary state.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Numerical methods in engineering · Material Properties and Failure Mechanisms · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Weight functions and fundamental fields for the penny-shaped and the half-plane crack in three-space10.1016/0020-7683(87)90032-1 ↗
2. Crack front segmentation and facet coarsening in mixed-mode fracture10.1103/PhysRevLett.115.265503 ↗
3. Fracture propagation paths under mixed mode loading within rectangular blocks of polymethyl methacrylate10.1029/95JB02507 ↗
4. Slightly curved or kinked cracks10.1007/BF00012619 ↗
5. Facet formation at the crack front under combined crack opening and anti-plane shear loading10.1016/j.engfracmech.2016.12.004 ↗
6. From telephone cords to branched buckles: a phase diagram10.1016/j.actamat.2016.12.025 ↗
7. Freund · 2003 · 255
8. Shear stress intensity factors for planar crack with slightly curved front10.1115/1.3171857 ↗
9. Fracture structure near a longitudinal shear macrorupture10.3103/S0025654412050032 ↗
10. Brittle fracture of solids with arbitrary cracks10.1007/BF00155254 ↗
11. The phenomena of rupture and flow in solids
12. Laws of crack motion and phase-field models of fracture10.1016/j.jmps.2008.10.012 ↗
13. Fissuration par fatigue sous sollicitations polymodales (mode I ondulé+mode III permanent) d’un acier pour rotors 26NCDV14
14. Tilting cracks: the evolution of fracture surface topology in brittle solids10.1007/BF00035157 ↗
15. The effect of mixed mode I/III on crack evolution in brittle solids10.1007/BF00018136 ↗
16. Phase-field model of mode III dynamic fracture10.1103/PhysRevLett.87.045501 ↗
17. An observation of crack propagation in antiplane shear10.1007/BF00189825 ↗
18. Lazarus · 1997
19. Comparison of predictions by mode II or mode III criteria on crack front twisting in three- or four-point bending experiments10.1007/s10704-008-9307-2 ↗
20. Crack front rotation and segmentation in mixed mode I+III or I+II+III - part I: calculation of stress intensity factors10.1016/S0022-5096(01)00007-2 ↗
21. Crack front rotation and segmentation in mixed mode I+III or I+II+III - part II: comparison with experiments10.1016/S0022-5096(01)00008-4 ↗
22. Theoretical analysis of crack front instability in mode I+III10.1016/j.jmps.2011.05.011 ↗
23. Multiscale cohesive zone model for propagation of segmented crack fronts in mode I+III fracture10.1007/s10704-015-0001-x ↗
24. On the strong influence of imperfections upon the quick deviation of a mode I+III crack from coplanarity10.2140/jomms.2015.10.299 ↗
25. Criterion for initiation of cracks under mixed-mode I+III loading10.1007/s10704-010-9476-7 ↗
26. On perturbations of plane cracks10.1016/S0020-7683(97)00231-X ↗
27. Crack extension in brittle solids
28. Further examination of the criterion for crack initiation under mixed-mode I+III loading10.1007/s10704-014-9966-0 ↗
29. Progress in understanding jointing over the past century10.1130/0016-7606(1988)100<1181:PIUJOT>2.3.CO;2 ↗
30. Formation and interpretation of dilatant echelon cracks10.1130/0016-7606(1982)93<1291:FAIODE>2.0.CO;2 ↗
31. Helical crack-front instability in mixed-mode fracture10.1038/nature08862 ↗
32. Formation of fracture “lances” in glass10.1016/0013-7944(69)90010-1 ↗
33. Combined mode I - mode III fracture of fatigue-precracked alumina10.1111/j.1151-2916.1987.tb04871.x ↗
34. Mixed-mode (I+III) fatigue thresholds in a forging steel10.1111/j.1460-2695.1989.tb00532.x ↗