Multi-scale defect interactions in high-rate failure of brittle materials, Part II: Application to design of protection materials
Source abstract
Abstract
Abstract Micromechanics based damage models, such as the model presented in Part I of this 2 part series ( Tonge and Ramesh, 2015 ), have the potential to suggest promising directions for materials design. However, to reach their full potential these models must demonstrate that they capture the relevant physical processes. In this work, we apply the multiscale material model described in Tonge and Ramesh (2015) to ballistic impacts on the advanced ceramic boron carbide and suggest possible directions for improving the performance of boron carbide under impact conditions. We simulate both dynamic uniaxial compression and simplified ballistic loading geometries to demonstrate that the material model captures the relevant physics in these problems and to interrogate the sensitivity of the simulation results to some of the model input parameters. Under dynamic compression, we show that the simulated peak strength is sensitive to the maximum crack growth velocity and the flaw distribution, while the stress collapse portion of the test is partially influenced by the granular flow behavior of the fully damaged material. From simulations of simplified ballistic impact, we suggest that the total amount of granular flow (a possible performance metric) can be reduced by either a larger granular flow slope (more angular fragments) or a larger granular flow timescale (larger fragments). We then discuss the implications for materials design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Rock Mechanics and Modeling · High-Velocity Impact and Material Behavior · Landslides and related hazards
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Strength and dilatancy of sands10.1680/geot.1986.36.1.65 ↗
2. A multi-stage return algorithm for solving the classical damage component of constitutive models for rocks, ceramics, and other rock-like media10.1007/s10704-009-9398-4 ↗
3. Intact and predamaged boron carbide strength under moderate confinement pressures10.1111/j.1551-2916.2011.04931.x ↗
4. Micromechanical model for comminution and granular flow of brittle material under high strain rate application to penetration of ceramic targets10.1016/0734-743X(93)90108-J ↗
5. Dandekar, Dattatraya P., Grady, Dennis E., 2002. Shock equation of state and dynamic strength of tungsten carbide. In: AIP Conference Proceedings, vol. 620, no. 1, pp. 783–786.10.1063/1.1483654 ↗
6. Dandekar, Dattatraya P., April 2001. Shock response of boron carbide. Technical Report ARL-TR-2456, Army Research Laboratory, Aberdeen Proving Ground, MD 21005-5066.
7. Dannemann, Kathryn A., Chocron, Sidney, Nicholls, Arthur E., Walker, James D., Anderson, Charles E., 2004. Ceramic Phenomenological Experiments-Compressive Strength of SiC. Department of Defense Standard, SwRI Report 18.06188.
8. Implicit numerical integration of a three-invariant, isotropic/kinematic hardening cap plasticity model for geomaterials10.1016/j.cma.2005.01.001 ↗
9. High-temperature pressure-shear plate impact experiments using pure tungsten carbide impactors10.1007/BF02321654 ↗
10. Modelling of failure mode transition in ballistic penetration with a continuum model describing microcracking and flow of pulverized media10.1002/nme.427 ↗
11. Impact response of layered steel–alumina targets10.1016/j.mechmat.2013.01.008 ↗
12. Grubinskas, Robert C., 1998. A review of the V50 Ballistic Limit requirements of MIL-STD-46100. Army Research Laboratory Memorandum Report (ARL-MR-95).
13. A probabilistic nonlocal model for crack initiation and propagation in heterogeneous brittle materials10.1002/nme.3362 ↗
14. A scaling law for the dynamic strength of brittle solids10.1016/j.actamat.2013.02.045 ↗
15. Lasalvia, J.C., Normandia, M.J., Miller, H.T., MacKenzie, D.E., 2005. Sphere impact induced damage in ceramics: Ii. armor-grade b 4c and wc. In: 2005 Ceramics Engineering and Science Proceedings, vol. 7, no. 26, pp. 183–192.10.1002/9780470291276.ch21 ↗
16. Meyers · 1994
17. Ballistic performance ranking of ceramic armor plates against high density penetrators. Department of Defense Standard (MIL-STD-376A), 1998.
18. Effect of crack growth dynamics on the rate-sensitive behavior of hot-pressed boron carbide10.1016/j.scriptamat.2007.05.028 ↗
19. An interacting micro-crack damage model for failure of brittle materials under compression10.1016/j.jmps.2007.06.012 ↗
20. Direct observation of the dynamic compressive failure of a transparent polycrystalline ceramic (ALON)10.1111/j.1551-2916.2006.00965.x ↗
21. Ravi-Chandar · 2004
22. Critical appraisal of limiting strain rates for compression testing of ceramics in a split hopkinson pressure bar10.1111/j.1151-2916.1994.tb06987.x ↗
23. Strack, O.E., Leavy, R.B., Brannon, R.M., 2014. Aleatory uncertainty and scale effects in computational damage models for failure and fragmentation. Int. J. Numer. Methods Eng., 102 (3–4), 468–495. http://dx.doi.org/10.1002/nme.4699.10.1002/nme.4699 ↗
24. Boron carbide-a comprehensive review10.1016/0955-2219(90)90048-K ↗
25. Tonge, Andrew L., 2014. A Unified Framework Which Uses Multi-Scale Microstructure Information for Modeling Dynamic Failure in Brittle Materials (PhD thesis), The Johns Hopkins University.
26. Tonge, Andrew L., Ramesh, K.T., 2015. Multi-scale defect interactions in high-rate brittle material failure. Part I: Model formulation and application to ALON. J. Mech. Phys. Solids, http://dx.doi.org/10.1016/j.jmps.2015.10.007 (this issue).10.1016/j.jmps.2015.10.007 ↗
27. Dynamic behavior of boron carbide10.1063/1.1686902 ↗
28. Dynamic strength and fragmentation of hot-pressed silicon carbide under uniaxial compression10.1016/j.actamat.2003.09.036 ↗
29. Shock compression behaviors of boron carbide (b4c)10.1063/1.2399334 ↗