How hidden 3D structure within crack fronts reveals energy balance
Source abstract
Abstract
Griffith's energetic criterion, or `energy balance', has for a century formed the basis for fracture mechanics; the energy flowing into a crack front is precisely balanced by the dissipation (fracture energy) at the front. If the crack front structure is not properly accounted for, energy balance will either appear to fail or lead to unrealistic results. Here, we study the influence of the secondary structure of low-speed crack propagation in hydrogels under tensile loading conditions. We first show that these cracks are bistable; either simple (cracks having no secondary structure) or faceted crack states (formed by steps propagating along crack fronts) can be generated under identical loading conditions. The selection of either crack state is determined by the form of the initial `seed' crack; perfect seed cracks generate simple cracks while a small local mode~III component generates crack fronts having multiple steps. Step coarsening eventually leads to single steps that propagate along crack fronts. As they evolve, steps locally change the instantaneous structure and motion of the crack front, breaking transverse translational invariance. In contrast to simple cracks, faceted cracks can, therefore, no longer be considered as existing in a quasi-2D system. For both simple and faceted cracks we simultaneously measure the energy flux and local dissipation along these crack fronts over velocities, $v$, spanning $0
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Numerical methods in engineering · Non-Destructive Testing Techniques · Computational Geometry and Mesh Generation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. Dynamic instability of brittle fracture10.1103/PhysRevLett.82.2314 ↗
2. Generalized Griffith criterion for dynamic fracture and the stability of crack motion at high velocities10.1103/PhysRevE.60.2366 ↗
3. Effective toughness of heterogeneous materials with rate-dependent fracture energy10.1103/PhysRevLett.127.035501 ↗
4. Solvent control of crack dynamics in a reversible hydrogel10.1038/nmat1666 ↗
5. Magic angles and cross-hatching instability in hydrogel fracture10.1103/PhysRevLett.100.178303 ↗
6. Environmental control of crack propagation in polymer hydrogels10.1007/s42558-020-00027-2 ↗
7. Dynamic crack tip equation of motion: high-speed oscillatory instability10.1103/PhysRevLett.103.164301 ↗
8. The dynamics of rapid fracture: instabilities, nonlinearities and length scales10.1088/0034-4885/77/4/046501 ↗
9. Failing softly: a fracture theory of highly-deformable materials10.1039/C5SM00496A ↗
10. Effect of solvent diffusion on crack-tip fields and driving force for fracture of hydrogels10.1115/1.4030587 ↗
11. Porous media fracturing dynamics: stepwise crack advancement and fluid pressure oscillations10.1016/j.jmps.2017.10.014 ↗
12. Instability in dynamic fracture and the failure of the classical theory of cracks10.1038/nphys4237 ↗
13. Crack front segmentation and facet coarsening in mixed-mode fracture10.1103/PhysRevLett.115.265503 ↗
14. Crack front dynamics across a single heterogeneity10.1103/PhysRevLett.107.144301 ↗
15. Toughening elastomers with sacrificial bonds and watching them break10.1126/science.1248494 ↗
16. A domain independent integral expression for the crack extension force of a curved crack in three dimensions10.1016/S0022-5096(01)00059-X ↗
17. The force on an elastic singularity
18. Instability in the propagation of fast cracks10.1103/PhysRevB.45.5146 ↗
19. Freund · 1998
20. A first-order perturbation analysis of crack trapping by arrays of obstacles10.1115/1.3176178 ↗
21. Ductile fracture10.1016/0022-3697(87)90118-1 ↗
22. Acquisition of inertia by a moving crack10.1103/PhysRevLett.104.114301 ↗
23. Brittle fracture of solids with arbitrary cracks10.1007/BF00155254 ↗
24. VI. The phenomena of rupture and flow in solids
25. Nucleation fronts ignite the interface rupture that initiates frictional motion10.1038/s41567-021-01299-9 ↗
26. Hull · 1999
27. Analysis of stresses and strains near the end of a crack traversing a plate10.1115/1.4011547 ↗
28. Theory of dynamic crack branching in brittle materials10.1007/s10704-007-9061-x ↗
29. Low-speed fracture instabilities in a brittle crystal10.1038/nature07297 ↗
30. Topological defects govern crack front motion and facet formation on broken surfaces10.1038/nmat5008 ↗
31. Nonlinear focusing in dynamic crack fronts and the microbranching transition10.1103/PhysRevLett.119.215505 ↗
32. Dynamic glass transition dramatically accelerates crack propagation in rubberlike solids
33. Comparison of predictions by mode II or mode III criteria on crack front twisting in three or four point bending experiments10.1007/s10704-008-9307-2 ↗
34. Theoretical analysis of crack front instability in mode I+III10.1016/j.jmps.2011.05.011 ↗
35. Configurational stability of a crack propagating in a material with mode-dependent fracture energy–Part I: Mixed-mode I+III10.1016/j.jmps.2019.02.007 ↗
36. The near-tip fields of fast cracks10.1126/science.1180476 ↗
37. Universality and hysteretic dynamics in rapid fracture10.1103/PhysRevLett.94.224301 ↗
38. The fracture of highly deformable soft materials: A tale of two length scales10.1146/annurev-conmatphys-042020-023937 ↗
39. Manogg · 1964
40. Instability in lattice fracture10.1103/PhysRevLett.71.2417 ↗
41. Why do cracks avoid each other?10.1007/BF00020156 ↗
42. Velocity transition in the crack growth dynamics of filled elastomers: Contributions of nonlinear viscoelasticity10.1103/PhysRevE.93.043001 ↗
43. Crack front waves10.1016/S0022-5096(97)00072-0 ↗
44. Poroelastic toughening in polymer gels: A theoretical and numerical study10.1016/j.jmps.2016.04.017 ↗
45. Further examination of the criterion for crack initiation under mixed-mode I+III loading10.1007/s10704-014-9966-0 ↗
46. On the growth of cracks under mixed-mode I+III loading10.1007/s10704-016-0098-6 ↗
47. The formation and growth of echelon cracks in brittle materials10.1007/s10704-017-0212-4 ↗
48. Failure of metals I: Brittle and ductile fracture10.1016/j.actamat.2015.12.034 ↗
49. Helical crack-front instability in mixed-mode fracture10.1038/nature08862 ↗
50. Dynamics and instabilities of planar tensile cracks in heterogeneous media10.1103/PhysRevLett.79.877 ↗
51. An experimental investigation into dynamic fracture: II. Microstructural aspects10.1007/BF01152313 ↗
52. An experimental investigation into dynamic fracture: III. On steady-state crack propagation and crack branching10.1007/BF01157550 ↗
53. A path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
54. Mathematical analysis in the mechanics of fracture
55. Crack front echelon instability in mixed mode fracture of a strongly nonlinear elastic solid10.1209/0295-5075/105/34001 ↗
56. Intersonic shear cracks and fault ruptures10.1080/00018730210122328 ↗
57. Brittle-quasibrittle transition in dynamic fracture: An energetic signature10.1103/PhysRevLett.104.045501 ↗
58. Interacting cracks obey a multiscale attractive to repulsive transition10.1103/PhysRevLett.120.255501 ↗
59. Propagating solitary waves along a rapidly moving crack front10.1038/35065051 ↗
60. Microbranching instability and the dynamic fracture of brittle materials10.1103/PhysRevB.54.7128 ↗
61. Confirming the continuum theory of dynamic brittle fracture for fast cracks10.1038/16891 ↗
62. Formation of fracture ‘lances’ in glass10.1016/0013-7944(69)90010-1 ↗
63. Highly stretchable and tough hydrogels10.1038/nature11409 ↗
64. Classical shear cracks drive the onset of dry frictional motion10.1038/nature13202 ↗
65. Brittle fracture theory predicts the equation of motion of frictional rupture fronts10.1103/PhysRevLett.118.125501 ↗
66. Fracture energy of gels10.1007/s101890070010 ↗
67. Discontinuous crack fronts of three-dimensional fractures10.1209/epl/i1998-00565-4 ↗
68. Local yielding around a crack tip in plexiglas10.1115/1.3408521 ↗
69. Lattice trapping of fracture cracks10.1063/1.1660699 ↗
70. Oscillatory and tip-splitting instabilities in 2D dynamic fracture: The roles of intrinsic material length and time scales10.1016/j.jmps.2021.104372 ↗
71. Configurational stability of a crack propagating in a material with mode-dependent fracture energy–Part II: Drift of fracture facets in mixed-mode I+II+III10.1016/j.jmps.2020.103894 ↗
72. Polyacrylamide hydrogels. I. Network imperfection10.1016/j.jmps.2019.06.018 ↗
73. Steady-state crack growth in polymer gels: a linear poroelastic analysis10.1016/j.jmps.2018.05.008 ↗